Question about 2000 Chrysler Concorde

3 Answers

Car tires wobble at low speeds

At low speeds the car wobbles and sways side to side, but at higher speeds the car becomes more stable.

Posted by on


3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Rim may have a dent or a weel balance weight may have fallen off.

Have the balance checked before your tires develop abnormal wear.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on May 18, 2009

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Had this happen to my 04 Buick Regal. It wobbled until you went about 30 mmiles per hour. The problem was a broken steel belt in one of the rear tires. I replaced the tire and the problem was solved.

Posted on Jan 17, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Checked the inner tire rod bushing on the rack and pinion. 2000 chrysler concorde have a known defect that the bushing wear out prematurely due to the design of the steering.

Posted on Jun 30, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Front end wobbles

If it wobbles at low speed it is usually a bad tire or bent rim. If it is at higher speeds it is almost always wheel balance.

Jan 12, 2014 | 1994 Ford Explorer Limited

1 Answer

The driver side front tire wobbles

have u had your car lined up at a aliment shop if not your toe end and camber could be not adjusted right

Feb 11, 2013 | 1997 Mercury Cougar XR7

1 Answer

My tire wobbles from side to side what could it be

tierod ends are wore out replace fast if it breaks completely you wont have control of the wheel

Jan 12, 2013 | 1999 Volkswagen Passat

1 Answer

Wheel wobble 02 ls

one of your tire's might be flawed or need balanced

Aug 28, 2012 | 2002 Lincoln LS

1 Answer

Front Left side wobbly and there is a squeeky noise when driving

Have you checked the tires ?
Sometimes a wobble can be a broken belt inside the tire tread.
Or it could be something loose in the hub.
You could also switch the front and rear tire to see if the wobble moves.

Aug 07, 2012 | Cadillac Cars & Trucks

1 Answer

When driving down the road at a low speed the rear end wobbles. St higher speed it shakes.

One of your rear tires busted a steel belt in the tire. It usually causes a hump in the tire when this happens, causing the wobble

Feb 22, 2011 | 2001 Nissan Sentra

1 Answer

When i drive @ low speeds or speeds of 50mph or higher my car starts to wobble

It sounds like you have a tire issue. You might want to have your tires balance at a tire shop.

Feb 07, 2011 | 2001 Pontiac Sunfire

3 Answers

2001 jeepgrand cherokee wobbles and shakes @low speed

could be a bd axle or ball joints wheel bearings are also a concideration

Aug 02, 2009 | 2001 Jeep Grand Cherokee

3 Answers

2004 Jeep wrangler steering wobble

Steering dampner (thing that looks like a shock absorber mounted sideways) can cause this. Most good alignment shops will check front end components for wear (shame on them if they didn't) but sometimes what seems like "acceptable play" if added to other components in similar condition can add up to a total of unacceptable...If dampner does not help, I'd start eliminating anything with any wear. A side-note to this is about caster angle...I never like factory camber does make steering easier but I prefer setting caster at least one full degree (+) past factory settings. This makes the vehicle more stable at higher speeds and often eliminates tendency of wheels to wobble. (won't go into full details, but it's why you can ride a bicycle with "no hands" if you turn the fork around and try that you will land on your ****!) If adjustable, it involves placing equal thickness shims on both sides, behind rear of front lower control arms. Changing this may alter toe in, so that should be re-set.

Mar 15, 2009 | 2004 Jeep Wrangler

Not finding what you are looking for?
2000 Chrysler Concorde Logo

877 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

80531 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides