Question about 2001 Chevrolet Tahoe

1 Answer

I have a tahoe 2002, on the cluster message center appear the message CARGO LAMP ON , and doesnt have any interior light on

I change the light switch, cluster, and i try with the dimmer and nothing

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Chevrolet Expert
  • 180 Answers

Cargo light is on the back of the cab to shine on your cargo, in the bed.

Posted on Dec 28, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 71 Answers

SOURCE: how do i change dimmer headlight dimmer switch on 1990 chev van

yul have to drop ur column down to get to it, not real hard to change just bolts to side of column. do not need to take column apart

Posted on Mar 29, 2009

n_c_713
  • 20 Answers

SOURCE: Water in rear cargo area of 1999 Tahoe.

if your tahoe has rear a/c your drain hose is probably plugged and is draining there. get under your tahoe by right rear behind rear tire. find drain hose and poke it through with small diameter but long object like wire coat hanger.

Posted on Jun 10, 2009

  • 9 Answers

SOURCE: put new window motor and switch and passenger side

Check the power Window Relay Fuse which should be located in the engine compartment relay fuse box. This fuse is a bigger square or rectangle with a black plastic or metal looking case. unlike the tiny colored plastic glass looking type you see in the inside fuse panel

Posted on Jul 01, 2009

  • 2 Answers

SOURCE: cargo lamp on message stays on

Check under the hood, in the fusebox, for a fuse label ctsy (courtesy). It'll be over the driver side wheel. Replace it, if blows and, you have a wire touching bear metal somewhere. Good luck!

Posted on Nov 05, 2012

  • 2 Answers

SOURCE: my cargo lamp on will not go out

Your courtesy fuse is blown. Look under the hood fusebox. There should be a fuse labeled CTSY (10amp). If blown, you have a hot wire touching bare metal.

Posted on Nov 05, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Ford E350 Van Door locks & dome lights are going on & off on there own


Do you know anything about automotive electronic's ? Control modules ?
Vehicle Security Module
The vehicle security module receives inputs from the following:
  • Door ajar switches
  • Keyless entry keypad
  • Ignition switch
  • Remote keyless entry (RKE) transmitter
The vehicle security module uses these inputs to control an output signal to the instrument cluster which controls the battery saver relay and interior lamp relay. The battery saver relay and the interior lamp relay are internal to the instrument cluster, and are not replaceable. There could be a faulty switch input to the I/C - insturment cluster , causing the vehicle security module to activate the lock's an light's .
Interior Lighting Systems
The instrument cluster grounds the battery saver relay and interior lamp relay coils when any door ajar switch is opened, or the interior lamp (headlamp) switch is closed. The interior lamp relay then supplies voltage to the interior lamp circuit. Vehicle speed must be less than 24 km/h (15 mph) for the instrument cluster to ground the interior lamp relay. The interior lamps remain illuminated for up to 25 seconds after all doors are closed unless the instrument cluster receives an input from any of the following:
  • voltage from the ignition switch.
  • a vehicle speed signal.
  • input from the keyless entry keypad through the vehicle security module.
  • input from the RKE transmitter unlock or panic switch through
  • the vehicle security module.
Do you know what DTC'S - diagnostic trouble codes are ?
Could have DTC'S stored in the following Modules
Instrument Cluster Diagnostic Trouble Code (DTC) Index DTC Description Source Action B1320 Driver Door Ajar Circuit Open Instrument Cluster Go To Pinpoint Test C . B1328 Passenger Door Ajar Circuit Open Instrument Cluster Go To Pinpoint Test C . B1342 ECU is Defective Instrument Cluster CLEAR the DTCs. REPEAT the self test. If DTC B1342 is retrieved again, INSTALL a new instrument cluster. REFER to Section 413-01 . All Other DTCs - Instrument Cluster REFER to Section 419-10 .


Vehicle Security Module Diagnostic Trouble Code (DTC) Index DTC Description Source Action B1322 Driver Door Ajar Circuit Short to Ground Vehicle Security Module Go To Pinpoint Test C . B1330 Passenger Door Ajar Circuit Short to Ground Vehicle Security Module Go To Pinpoint Test C . B1338 Door Ajar RR Circuit Short to Ground Vehicle Security Module Go To Pinpoint Test C . B1342 ECU is Defective Vehicle Security Module CLEAR the DTCs. REPEAT the self test. If DTC B1342 is retrieved again, INSTALL a new vehicle security module. REFER to Section 419-10 . B1574 Door Ajar LR Circuit Short to Ground Vehicle Security Module Go To Pinpoint Test C . All Other DTCs - Vehicle Security Module REFER to Section 419-10 .
Your best bet mite be to take to a qualified repair shop .

Sep 05, 2017 | Ford Cars & Trucks

1 Answer

How do i bim and brighten dash light 2002 buick lesabre


bim or DIM ? the dimmer switch ! Interior Lamps
The interior lamps consists of two groups, lamps that can not be dimmed and lamps that can be dimmed. This first group consists of lamps that may not be dimmed. This includes those lamps that may be manually turned on by placing the interior lamp switch to the DOME position, or by opening a door or a compartment:
• Door courtesy lamps
• Footwell courtesy lamps
• Instrument panel (I/P) compartment lamp
• Overhead console courtesy lamps
• Reading courtesy lamps
• Rear compartment courtesy lamp
• Roof rail courtesy lamps
• Sunshade vanity mirror lamps

Interior Lamps Dimming
This group of interior lighting includes lamps which may be dimmed. This group uses a combination of class 2 controlled illumination and incandescent lamps:
• Air temperature switch
• Cigar lighter lamp
• Door switches
• Driver information center (DIC) switch
• Headlamp switch
• Head-up display (HUD) switch
• Heated seat switches
• HVAC control assembly
• Instrument panel cluster (IPC)
• Memory function switch
• Radio
• Steering wheel controls
• Window switches
For the interior lighting to be dimmed the following conditions must be met:
• A low light level has been detected by the dash integration module (DIM)
• Headlamp switch is placed in to the PARK or HEAD position
• Ignition switch is placed in the ON position
Then all class 2 displays and all incandescent back lighting will be illuminated to the level set by the instrument panel (I/P) dimmer switch. When the I/P dimmer switch is moved from MIN to MAX, all class 2 displays and all incandescent back lighting respond from minimum intensity to maximum brightness.
The DIM supplies battery positive voltage to the coil side of the PRK LP relay in the rear fuse block.
When the I/P dimmer switch is moved from MIN to MAX, then the instrument panel module (IPM), W/CJ2, or climate control panel (CCP), W/C67, applies a message to the class 2 communication circuit to the DIM. The DIM then applies a ground to the park lamp relay control circuit. This energizes the PRK LAMP relay and allows battery positive voltage to be applied through the DIMR fuse to the DIM. The DIM then illuminates the following incandescent lamps through the incandescent dimming output circuit:
• Cigar lighter lamp
• DIC Switch
• Headlamp switch
• HUD switch
• HVAC control assembly
• IPC
• Radio
• Steering wheel controls
The DIM also applies a message to the following class 2 controlled illumination components:
• Drivers door module (DDM)
• HVAC control assembly
• IPC
• Radio
The DDM will then send a message through the simple bus interface (SBI) to the RH front door module (RFDM). The door modules will then illuminate the following components through the incandescent dimming output circuit:
• Air temperature switch
• Heated seat switches (W/KA1)
• Memory function switch (W/A45)
• Power door lock switches
• Power window switches
The ground for these components are provided from the DDM and RFDM.
The following components are grounded at G200:
• Headlamp switch
• HVAC control assembly
• IPC
• Radio
• Steering wheel controls
The following components are grounded at G201:
• Cigar lighter lamp
• DIC Switch
• HUD switch

Mar 13, 2017 | 2002 Buick LeSabre

1 Answer

2002 ford expedition interior lights are not on what fuse is it?


Courtesy Lamps - central junction box. fuse # F1.21 that goes to interior lamp relay in the instrument cluster and F.24 this fuse powers battery saver relay .
Interior Lighting The interior light system consists of the following:
  • front map lamp assembly
  • front door courtesy lamp
  • generic electronic module (GEM)
  • glove box lamp assembly
  • central security module
  • interior lamp switch
  • interior lamp relay
  • illuminated vanity mirrors (Navigator only)
  • reading lamp assembly
  • rear courtesy lamp
  • running board lamp
  • underhood lamp assembly
  • The generic electronic module (GEM) illuminates the interior lamps when an unlock signal is received from the remote anti-theft personality central security module. The illuminated entry feature will be canceled when any of the following conditions are met:
    • 25 seconds have elapsed since the illuminated entry feature was activated and the interior lamp control is not activated (door ajar or courtesy lamp switch on).
    • The GEM receives a request from the central security module (remote transmitter lock button pressed) and the interior lamp control is not activated.
    • The ignition is in the RUN or START position and the interior lamp control is not activated.
    The GEM will illuminate the interior lamps when any door is open or ajar. The interior lamps are; the dome lamp, the rear cargo lamp, the door courtesy lamp and the side rail lamps. The courtesy lamps will shut off when the doors are closed and the illuminated entry feature is not active or when the vehicle speed is greater than 5 mph (8 km/h). The interior lamps will not be reactivated until the vehicle speed is less than 3 mph (5 km/h) and a new door open warning lamp switch is received.
    The GEM controls the interior lamps illuminated entry function by activating the interior lamp relay.
  • You have an electronic control module and relays involved in the operation of these lights also !

  • What

    Jan 08, 2015 | 2002 Ford Expedition

    1 Answer

    Trunk cargo light not working after LED installed....


    The SJB supplies power to the interior lighting system. The SJB will set DTCs if certain circuit failures exist with the interior lighting system.
    Visual Inspection Chart Mechanical Electrical
    • Courtesy lamps
    • Map lamps
    • Luggage compartment lamp
    • Vanity lamps
    • Glove compartment lamp
    • Smart junction box (SJB) fuse 3 (15A)
    • Circuitry
    • Courtesy lamps
    • Map lamps
    • Luggage compartment lamp
    • Vanity lamps
    • Glove compartment lamp
    • SJB

    Check fuse # 3 SJB

    Jul 07, 2017 | 2010 Ford Fusion 2.5

    1 Answer

    My cargo and interior lights wil;l not go off on my 2002 F-150 I need to lnow what fuse it is or fuses?????


    This is usually caused by the door ajar switch not making contact.
    The door switch is part of the door latch on the F-150.

    Liberally spray the door latch with WD-40, close and open a few times. Repeat this process 3 or 4 times, and check the interior lights / door ajar indicator on the cluster.

    There are pictures of where to spray in a sticky in the Electrical forum on F150online.com if you need them. This is a somewhat common problem, to get dirt and gunk in the door ajar switch, causing the contacts to stay open.

    Nov 11, 2010 | 2002 Ford F150 Regular Cab

    2 Answers

    My interior light and cargo light will not go off, even when my door is shut.


    If the door ajar indicator on the cluster is also on, might want to soak the door latch with WD-40.
    The door ajar and interior lights are turned on when the door latch is open. Some times the switch gets stuck, and a good soaking of WD-40 will release it. The door latch and the switch for the door are the same unit.

    Jan 07, 2010 | 2002 Ford F150 Regular Cab

    1 Answer

    Abs fuse


    Fuses are listed here

    * = maxi fuse

    1*=50A I/P fuse panel
    2*=40A blower motor relay
    3*= 50A 4 wheel ABS module
    4*=20a Main light switch-Instrument cluster
    5*=50A Ignition switch, starter relay

    6*=20A Transfer case relay
    7*= NOT USED
    8*=20A Auto Ride Control Switch/on off switch
    9*=40A Auto Ride Control relay
    10*=30A PCM power relay

    mini fuses
    1=10A A/C relay
    2=20A Aux power point
    3= not used
    4=15A Fog lamps-Daytime lamps
    5=10A Air Bag diagnostic monitor
    6=10A Powertrain Control Module (PCM)
    7=30A 4WABS module
    8=30A PCM relay
    9=20A Fuel Pump2.gif relay and RAP module
    10= 15A Horn relay
    11=15A Park Lamp relay-Main Light Switch
    12=30A Main light switch--Multi Function switch
    13=15A Heated O2 sensors, EGR Vacuum Regulator, EVR solenoid,Camshaft position (CMP) Sensor,
    Cannister Vent Solenoid, A4LD Auto Transmission
    14=30A Generator-Voltage regulator


    Interior fuse panel (mini fuses)

    1=7.5A Power mirror switch
    2=7.5A Blower motor relay,PAD module,Air Bag diagnostic monitor
    3=7.5A Trailer tow connector
    4=10A Left headlamp
    5=10A Data link connector (DLC)
    6=7.5A Air bag diagnostic monitor, Blower motor relay, Passive deactivation Module (PAD)
    7=7.5A Trailer Tow connector
    8=10A Right headlamp, Daytime running lamps (DRL) module, Foglight relay
    9=7.5A Stop Lamp switch
    10= 7.5A Speed control-amplifier assembly,Brake pressure switch, Generic electronoc Module (GEM)
    Shift lock actuator, Blend door actuator, Main light switch, RABS resistor, A/C heater assembly
    Flasher
    11= 7.5A Instrument cluster, Main light switch, RABS resistor
    12= 10A Power window relay, Washer pump relay
    13= 20A Stop lamp switch, Brake pressure switch
    14= 20A Rear Anti Lock Brake system (RABS) module
    **10A 4WABS module**

    15=7.5A Instrument cluster
    16= 30A Windshield wiper Motor, Wiper Hi-lo relay, wiper run/park relay
    17=7.5A Cig lighter
    18=15A Drivers unlock relay-All unlock relay
    19=25A PCM power diode
    20=7.5A RAP module GEM module, Radio
    21=15A Flasher (hazard)
    22=20A Aux power socket
    23=15A Turn signals
    24===not used
    25= 7.5A GEM module, Instrument cluster
    26= 10A Battery saver relay, Electronic Shift relay, Interior lamp relay
    Power window relay,Electronic shift control module, transmission control
    27=15A Switch,DRL, Backup lamp switch, DTR sensor,Instrument illumination dimming control module
    Dome/map lamp, GEM,electronic shift,Interior lights,Glove box lamp and switch
    28=7.5A GEM module-Radio
    29= 15A Radio
    30=15A Park lamps, trailer Tow relay
    31===not used
    32=10A rear blower
    33=15A Headlamps, DRL module, Instrument cluster
    34=7.5A Rear integrated control panel, CD
    35=10A RABS test connector
    36=7.5A CD, rear integrated control panel, memory seat, Message center Attached images fuse%20box001.jpg?imgmax=800 __________________

    Oct 29, 2009 | 2003 Ford Explorer

    2 Answers

    I need a fuse box diagram for a 2003 Ford Explorer Sport


    I believe that this is what you are looking for.....
    Fuse and relay locations--2nd generation power distribution box Layout- I think this is a good sticky candidate--

    attachment.php?attachmentid=29397&d=1133918512

    Fuses are listed here

    * = maxi fuse

    1*=50A I/P fuse panel
    2*=40A blower motor relay
    3*= 50A 4 wheel ABS module
    4*=20a Main light switch-Instrument cluster
    5*=50A Ignition switch, starter relay

    6*=20A Transfer case relay
    7*= NOT USED
    8*=20A Auto Ride Control Switch/on off switch
    9*=40A Auto Ride Control relay
    10*=30A PCM power relay

    mini fuses
    1=10A A/C relay
    2=20A Aux power point
    3= not used
    4=15A Fog lamps-Daytime lamps
    5=10A Air Bag diagnostic monitor
    6=10A Powertrain Control Module (PCM)
    7=30A 4WABS module
    8=30A PCM relay
    9=20A Fuel Pump relay and RAP module
    10= 15A Horn relay
    11=15A Park Lamp relay-Main Light Switch
    12=30A Main light switch--Multi Function switch
    13=15A Heated O2 sensors, EGR Vacuum Regulator, EVR solenoid,Camshaft position (CMP) Sensor,
    Cannister Vent Solenoid, A4LD Auto Transmission
    14=30A Generator-Voltage regulator


    Interior fuse panel (mini fuses)

    1=7.5A Power mirror switch
    2=7.5A Blower motor relay,PAD module,Air Bag diagnostic monitor
    3=7.5A Trailer tow connector
    4=10A Left headlamp
    5=10A Data link connector (DLC)
    6=7.5A Air bag diagnostic monitor, Blower motor relay, Passive deactivation Module (PAD)
    7=7.5A Trailer Tow connector
    8=10A Right headlamp, Daytime running lamps (DRL) module, Foglight relay
    9=7.5A Stop Lamp switch
    10= 7.5A Speed control-amplifier assembly,Brake pressure switch, Generic electronoc Module (GEM)
    Shift lock actuator, Blend door actuator, Main light switch, RABS resistor, A/C heater assembly
    Flasher
    11= 7.5A Instrument cluster, Main light switch, RABS resistor
    12= 10A Power window relay, Washer pump relay
    13= 20A Stop lamp switch, Brake pressure switch
    14= 20A Rear Anti Lock Brake system (RABS) module
    **10A 4WABS module**

    15=7.5A Instrument cluster
    16= 30A Windshield wiper Motor, Wiper Hi-lo relay, wiper run/park relay
    17=7.5A Cig lighter
    18=15A Drivers unlock relay-All unlock relay
    19=25A PCM power diode
    20=7.5A RAP module GEM module, Radio
    21=15A Flasher (hazard)
    22=20A Aux power socket
    23=15A Turn signals
    24===not used
    25= 7.5A GEM module, Instrument cluster
    26= 10A Battery saver relay, Electronic Shift relay, Interior lamp relay
    Power window relay,Electronic shift control module, transmission control
    27=15A Switch,DRL, Backup lamp switch, DTR sensor,Instrument illumination dimming control module
    Dome/map lamp, GEM,electronic shift,Interior lights,Glove box lamp and switch
    28=7.5A GEM module-Radio
    29= 15A Radio
    30=15A Park lamps, trailer Tow relay
    31===not used
    32=10A rear blower
    33=15A Headlamps, DRL module, Instrument cluster
    34=7.5A Rear integrated control panel, CD
    35=10A RABS test connector
    36=7.5A CD, rear integrated control panel, memory seat, Message center Attached images fuse%20box001.jpg?imgmax=800 __________________

    Oct 10, 2009 | 2003 Ford Explorer Sport

    2 Answers

    My cargo lamp on will not go out


    Your courtesy fuse is blown. Look under the hood fusebox. There should be a fuse labeled CTSY (10amp). If blown, you have a hot wire touching bare metal.

    Sep 06, 2009 | 2001 Chevrolet Silverado 1500

    3 Answers

    Cargo lamp on message stays on


    Check under the hood, in the fusebox, for a fuse label ctsy (courtesy). It'll be over the driver side wheel. Replace it, if blows and, you have a wire touching bear metal somewhere. Good luck!

    Aug 26, 2009 | 2001 Chevrolet Silverado 1500

    Not finding what you are looking for?
    2001 Chevrolet Tahoe Logo

    160 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76848 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6927 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...