Question about 2007 SsangYong Actyon 4x4

Open Question

Limp home p1191 malfunction- valvula activa - 2007 SsangYong Actyon 4x4

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can someone help me with these Codes I got from a diagnostic? I have a Hyundai XG300. P1191 P0171 P0174 P1632 P1193 I know this is a lot to ask but there has to be a good mechanic out there to help me I...


Visit http://www.obd-codes.com/trouble_codes/ and
http://hyundai.wikia.com/wiki/OBD-II_Error_Codes
for the codes you have.

So the 171 and 174 indicate lean fuel/air, the 1191 and 1193 indicate the car is in limp home mode. And 1632 is a traction control issue.

The lean mixture might be as simple as a plugged fuel filter, or as complex as trouble with the injectors, the throttle position sensor, fuel pressure regulator, or fuel pump. How long since you replaced the fuel filter? If it has been close to or beyond the recommended interval this is a cheap ($20 for the part) and fairly easy thing to try.

The lean fuel/air could be the cause of the limp home mode.

The 1632 code is a traction control system malfunction. Could be an intermittent issue or occurred because the engine is operating erratically. With this code the car should still run fine, but the TCS won't work properly.

Jan 05, 2010 | 2001 Hyundai XG300

1 Answer

My car is xg300 Hyundai the code showing up are p01191 &p1193 , p0136, p0141 what are they will it cost me


Electronic Throttle System codes (P1191 & 1193), Limp Home mode & Low RPM (Detected RPM below 470). This is usually cause by either a sticking throttle plate or an intake air hose leak.

P0136 - O2 Sensor Malfunction (Bank 1, sensor 2), P0141 - O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 2). Either the sensor is broken, it's been unplugged, or the wiring has been damaged.

Oct 13, 2009 | 2001 Hyundai XG300

1 Answer

Year 2001 XG300 P0115, P1159, P1191, P1193, P0115


P0115 - Engine Coolant Temp Sensr - open/short
P1159 - Variable Intake Motor Malfunction

P1191/P1193 Limp Home Valve - Low RPM

First, clean the throttle body and check for anything which might obstruct AIR FLOW to it.

The P1159 is the Variable Intake Motor Malfunction. this motor is either 'OPEN'... or 'CLOSED' position. It is located on/in the intake manifold (plenum) and is only opened when cruising... it is closed at idle. If it sticks 'OPEN' is can cause drivability issues.

Aug 10, 2009 | 2001 Hyundai XG300

1 Answer

I have 8000 miles on my Tucson check engine light came on at start up this morning...gas cap is tight...no problems?????


there are over 200 reasons for the check engine light to come on, the gas tank cap is just one of them, this light and the problem that turned it on are most likely covered under the federal emission warranty, contact the dealer. see trouble code list below for some of the probelems that cause a check enghine light.
P1100 Map Sensor - Malfunction
P1101 Map Sensor - Abnormal
P1102 Map Sensor - Low Input
P1103 Map Sensor - High Input
P1104 Air Flow
P1105 Air Flow - Abnormal
P1106 Air Flow - Low Input
P1107 Air Flow - High Input
P1108 Fuel Pump
P1109 Fuel Pump - Abnormal
P1110 Fuel Pump - Stuck On
P1110 ETS System - Malfunction
P1111 Fuel Pump - Electrical
P1112 Manifold Differential Pressure Sensor
P1112 VGT Actuator - Malfunction
P1113 Manifold Differential Pressure Sensor - Abnormal
P1114 Manifold Differential Pressure Sensor - Low
P1115 Coolant Temperature Input - Abnormal
P1116 Boost Pressure Sensor - Malfunction
P1118 ETS Motor - Malfunction
P1119 Inlet Metering Valve Control
P1120 Electric Governor - Malfunction
P1120 Inlet Metering Valve Malfunction
P1121 APS PWM Output Circuit Malfunction
P1121 Throttle Position Input - Abnormal
P1122 Boost Pressure Control Valve
P1123 Fuel System Rich - Idle
P1123 Timer Position Sensor - Malfunction
P1124 Fuel System Lean - Idle
P1125 Fuel Press Sensor1
P1126 Fuel Press Sensor2
P1127 Fuel System Rich - Part Load
P1127 Control Sleeve Position Sensor
P1128 Fuel System Lean - Part Load
P1130 Start Solenoid- Malfunction
P1131 Injection Quantity Adjust
P1134 O2s Transition Time(B1/S1)
P1135 Injection Timing Servo
P1140 Inlet Air Temperature Sensor Malfunction
P1141 Slow Duty Solenoid- Malfunction
P1145 Main Duty Solenoid- Malfunction
P1146 Idle Co Potentiometer
P1147 Accelerator Position Sensor (ETS) Circuit
P1150 Barometric Pressure Sensor Malfunction
P1151 Accelerator Position Sensor (EMS) Circuit
P1152 Accelerator Position Circuit-Low Input
P1153 Accelerator Position Circuit-High Input
P1154 O2s Transition Time(B2/S1)
P1155 Limp Home Valve- Malfunction
P1159 Variable Induction System
P1162 High Pressure Pump & Fuel Line
P1166 O2s (B1) Control Adaptation
P1166 Limit O2s Lambda Control (B1)
P1167 O2s (B2) Control Adaptation
P1167 Limit O2s Lambda Control (B2)
P1168 O2s (B1/S2) Heater Power
P1169 O2s (B2/S2) Heater Power
P1170 ECM (Barometric Pressure Sensor)
P1171 ETS Valve Stuck - Open
P1172 ETS Improper Motor Current
P1173 ETS Target Following Malfunction
P1174 ETS Valve Stuck - Close #1
P1175 ETS Valve Stuck - Close #2
P1176 ETS Motor Open/Short #1
P1177 ETS Motor Open/Short #2
P1178 ETS Motor Power - Open
P1179 ETS Position F/B-Mismatch
P1180 O2 S1 Heater Circuit- Malfunction
P1180 Fuel Pressure Regulator - Malfunction
P1181 Fuel Pressure Monitoring
P1182 O2 S2 Heater Circuit - Malfunction
P1182 Fuel Pressure Regulator - Short
P1183 Fuel Pressure Regulator - Open
P1184 O2s No Activity (B1/S2)
P1184 Fuel Pressure Regulator - Power
P1185 Fuel Position - Excessive
P1186 Fuel Pressure - Too Low
P1187 Regulator Valve - Stuck
P1188 Fuel Pressure - Leakage
P1189 Governor Deviation
P1190 Intake Throttle Actuator
P1191 ETS Limp Home Valve On
P1192 Limp home - Target Follow Malfunction
P1193 ETS Limp Home - Low Rpm
P1194 Limp Home - TPS2 Position Malfunction
P1195 Limp Home - Target Follow Delay
P1196 ETS Limp Home - Close Stuck
P1300 Spark Timing Adjust Signal
P1300 Injector Specific Data Fault
P1300 Synchronization Error-CKP/CMP
P1301 TDC Sensor - Abnormal
P1302 TDC Sensor - Low Input
P1303 TDC Sensor - High Input
P1304 Phase Sensor
P1305 Phase Sensor - Abnormal
P1306 Phase Sensor - Low Input
P1307 Phase Sensor - High Input
P1307 Accelerator Sensor - Range/Performance
P1308 Ignition Coil.1
P1308 Accelerator Sensor - Low
P1308 Accelerator Sensor Circuit - Low
P1309 Ignition Coil.1 - Abnormal
P1309 Accelerator Sensor - High
P1309 Accelerator Sensor Circuit - High
P1310 Ignition Coil.1 - Low Output
P1310 Injection Control Circuit Fault
P1311 Ignition Coil.1 - High Output
P1312 Ignition Coil.2
P1313 Ignition Coil.2 - Abnormal
P1314 Ignition Coil.2 - Low Output
P1315 Ignition Coil.2 - High Output
P1316 Ignition Coil.3
P1317 Ignition Coil.3 - Abnormal
P1318 Ignition Coil.3 - Low Output
P1319 Ignition Coil.3 - High Output
P1320 Ignition Coil.4
P1321 Ignition Coil.4 - Abnormal
P1321 Glow Indicator Lamp - Short
P1322 Ignition Coil.4 - Low Output
P1322 Glow Indicator Lamp - Open
P1323 Ignition Coil.4 - High Output
P1324 Glow Relay - Malfunction
P1325 Glow Relay - Abnormal
P1325 Glow Relay
P1326 Glow Relay - Stuck On
P1326 Glow Relay - Short
P1327 Glow Relay - Electrical
P1327 Glow Relay - Open
P1330 Spark Timing Adjust Signal
P1331 #1 MF Signal Line Short
P1332 #2 MF Signal Line Short
P1333 #3 MF Signal Line Short
P1334 #4 MF Signal Line Short
P1335 #5 MF Signal Line Short
P1336 #6 MF Signal Line Short
P1337 #7 MF Signal Line Short
P1338 #8 MF Signal Line Short
P1340 IFS 2 Open

Jun 16, 2009 | 2006 Hyundai Tucson

1 Answer

Emission system codes


P0421 - Warm Up Catalyst Efficiency Below Threshold (Bank 1)
P0171 - Fuel System Too Lean - (Bank 1)
P0446 - Canister Close Valve Malfunction
P1191/P1193 - Limp Home Valve - Low RPM
Before replacing the catalytic converter (bank 1 next to the firewall, Bank 2 is near the radiator), you'll want to verify it is bad (most likely is it sinse you also have a 'lean' code for Bank 1 - probably clogged). This can also cause misfires and engine stumble (low RPM) that's probably where the 1191/1193 occurred. The final DTC, P0446 - Canister Close Valve Malfunction, could be the valve itself, or the wiring between it and the PCM. Check the connector & pins for any damage/corrosion.
daf574f.jpg
Hope this helps

Mar 30, 2009 | 2001 Hyundai XG300

2 Answers

Diagnostic Trouble codes...Hyundai xg300


P1191 ETS Limp Home Valve On P1193 ETS Limp Home - Low Rpm
P1607 Vacuum Sol. Valve Stuck On or Vacuum Solenoid. Valve Stuck On,
I believe you have aproblem in the electronic throttle control motor/actuator, all three code's are related.

Mar 17, 2009 | 2001 Hyundai XG300

Not finding what you are looking for?
2007 SsangYong Actyon 4x4 Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top SsangYong Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

terry stevens

Level 3 Expert

991 Answers

Are you a SsangYong Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...