Question about 2000 Chevrolet Metro

Open Question

2000 chevy metro change oxygen sensor

How do I change oxygen sensor?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 740 Answers

SOURCE: oxygen sensor

They are all located on you exhaust system. Start from you exhaust manifold and follow the pipes down to the tail pipes . You will see the sensors (4) they are screwed into exhaust pipes and they have wire connections on them (Kinda Looks Like a spark Plug) they wires are unusually colored in white black and grey. Good Luck contact if you need more information

Posted on Dec 28, 2008

Ad
  • 91 Answers

SOURCE: I am having problems with the oxygen sensor on my

your o2 sensor is located on your exaust. You have either two or four, I think their is only two on a 99 chevy if I remember correctly, pre catalyst and post catalyst. This means one before your catalytic converter and one after. The pre is usualy the culprit but they will not stop your truck from cranking over. This sounds more like a battery,battery cable, or starter problem. Hope this helps, Clay

Posted on Mar 26, 2009

  • 18 Answers

SOURCE: I need a wire diagram for a 2000 zr2 s10 chevy 4x4

  1. this should help.8d4efbb.gif

Posted on Aug 07, 2009

  • 75 Answers

SOURCE: need to find and replace oxygen sensor for 2003 chevy ventue

Need a 7/8 open end wrench or a o2 sensor socket. Located in exhaust pipe. The one closest to the engine is Bank 1 Sensor 1. The ones located downstream and known as "Sensor 2"

Posted on Jan 06, 2010

  • 1757 Answers

SOURCE: how to change serpentine belt on 2000 chevy metro

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
CLICK on the following LINK. It takes you directly to and has several Belt Diagrams, one which will match your specific engine. It also has the Direction of Rotation on the Tensioner in order to loosen and remove the Serpentine Belt.

Let me know if this helped...
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2000/make/chevrolet/model/metro/2000_chevrolet_metro_drive_belt_routing_diagram.htm

Posted on Mar 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change upstream o2 sensor on 2008 chevy uplander 3.9l ?


  • 1 Warm up the engine for about four minutes to bring it to operating temperature. Then turn off the engine. This will avoid damage to the exhaust pipe threads if that sensor has seized to the pipe.
  • 2 Find the oxygen sensor or sensors you need to replace. The upstream sensor is located near the exhaust manifold and the downstream sensor on the back exhaust pipe, close to the catalytic converter.
  • 3 Disconnect the oxygen sensor electrical connector. Depending on your particular Chevy model, both sensors may be disconnected from the engine compartment.
  • 4 Lift the front of your Chevy model to reach the sensor you need to change, if necessary. Use a floor jack and two jack stands to support it.
  • 5 Remove the oxygen sensor using a box-end wrench or a ratchet and oxygen-sensor socket.


  • Read more : http://www.ehow.com/how_5159092_replace-oxygen-sensor-chevy.html

    Jul 23, 2014 | Chevrolet Chevy Cars & Trucks

    2 Answers

    I have a 2000 chevy suburban with codes p1133 and p0131 what is the pooblem


    P1133 indicates heated oxygen sensor insufficient switching bank #1 sensor #1. P0131 indicates voltage from that sensor is staying low more than 2 minutes. That sensor could be bad or it could indicate a rich condition.

    May 10, 2011 | Chevrolet Suburban 1500 Cars & Trucks

    1 Answer

    2000 1.3l chevy metro cam and crank shaft position sensor resistance


    00 chevy metro 1.3l just replace head gasket and had head work new timing belt timing/compressing good reassembled adjusted valve attemp to crank and #1 #3 s/plug foul #2 #4 good need help

    Mar 03, 2011 | Chevrolet Metro Cars & Trucks

    1 Answer

    P1176 2000 VW JETTA ALREADY CHANGED THE 02


    17584/P1176/004470 - Bank1: O2 (Lambda) Correction Behind Catalyst: Control Limit Reached Possible Causes
    • Intake Air System leaking
    • Oxygen Sensor(s) and/or Oxygen Sensor Control faulty
    Possible Solutions
    • Check Intake Air System for Leaks (False Air)
    • Check Oxygen Sensor(s) and/or Oxygen Sensor Control (all of them!)
    This is the pre 02 sensor located before the catalytic converter.

    May 10, 2010 | 2000 Volkswagen Jetta TDI

    2 Answers

    Code p0332 and p0420


    16716/P0332 - Knock Sensor 2 (G66): Signal Too Low Possible Symptoms
    • Irregular rpm
    • Drivability problems
    • Loss of power
    • Engine damage
    Possible Causes
    • Circuit G66 short to Ground
    • Circuit G66 open
    • G66 improperly torqued
    • G66 damaged
    • Control Module damaged
    16804/P0420/001056 - Catalyst System; Bank 1: Efficiency Below Threshold Possible Causes
    • Leakage in Intake and/or Exhaust System
    • Catalyst faulty
    • Oxygen Sensor(s) faulty
    • Oxygen Sensor(s) Control faulty
    Possible Solutions
    • Check Intake and Exhaust System for Leaks
    • Check Catalyst
    • Check Oxygen Sensor(s)
    • Check Oxygen Sensor(s) Control
      • Perform Oxygen Sensor(s) Aging Check

    May 03, 2010 | 2000 Chevrolet Monte Carlo

    1 Answer

    Having trouble with wiring of oxygen sensor


    there should be a paper inside the parts box that tells you how to rewire the after market sensor

    Jan 21, 2010 | 1997 Geo Metro

    1 Answer

    How to change serpentine belt on 2000 chevy metro


    My sincere apologies for the delayed response.
    I am personally going back to answer your unanswered questions.
    CLICK on the following LINK. It takes you directly to and has several Belt Diagrams, one which will match your specific engine. It also has the Direction of Rotation on the Tensioner in order to loosen and remove the Serpentine Belt.

    Let me know if this helped...
    Again my apologies...
    http://www.2carpros.com/car_repair_information/year/2000/make/chevrolet/model/metro/2000_chevrolet_metro_drive_belt_routing_diagram.htm

    Dec 28, 2009 | 2000 Chevrolet Metro

    2 Answers

    PO131 and PO 151


    P0131=O2 Sensor Circuit Low Voltage Bank 1 Sensor 1
    P0151=O2 Sensor Circuit Low Voltage Bank 2 Sensor 1
    Marc,
    this shows that the oxygen sensor on the left exhaust pipe before converter is bad,
    And the front oxygen sensor on the right exhaust infront of converter is bad.

    Dec 09, 2009 | 2000 Chevrolet Blazer

    Not finding what you are looking for?
    2000 Chevrolet Metro Logo

    Related Topics:

    104 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76673 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8531 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...