Question about 2006 Buick Lucerne

Open Question

Replace water pump on 2006 buick lucerne - 2006 Buick Lucerne

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: how do you access the windshield washer pump on

The washer pump is located on the bottom of the wash fluid bootle. you can access it by removing the front passanger fender liner..

Posted on Jan 12, 2010

Ad
clifford224
  • 1975 Answers

SOURCE: I have a 2006 Buick Lucerne CXS and I'm wondering

There are 2 different engines that came in the Lucerne in 2006 and I am not sure which one the CXS had. In any case below are pictures of both engines as well as locations. If you have the 3.8 liter (6 cylinder) engine you can add coolant directly to the radiator in the spot marked "A". But on your regular fluid checks you want to make sure that where the "B" is marked that the overflow tank there has fluid up to the line that says "full". If you have the 4.6 liter (8 cylinder) engine the overflow tank and where you fill up the radiator are the same (location "A") so that is the location you would fill the radiator as well as check to make sure there is coolant to the "full" line on the tank on your regular fluid checks, When you look at the pictures below you will understand easier. I hope this helps and good luck.

clifford224_823.gif


clifford224_824.gif

Posted on Jun 15, 2011

airjer995
  • 5332 Answers

SOURCE: where is the battery in buick lucern 2006 located and how can i jump start it?

It's under the back seat.

Posted on Jan 18, 2012

odiebugs
  • 949 Answers

SOURCE: i replaced my water pump for my 2006 buick lucerne and now theres no heat

Hope you didn't break a nail.

There is a air pocket in the heater core, you just didn't burp it right.

Try this

  1. Open the hood of your car. Secure the hood with the safety handle. If you have a newer car, you should have a bleeder valve on the front of your radiator. Check in your owner's manual for the location of this valve. If you do start your car, open the valve with wrench and let your car heat up. The excess air will bleed out of your cooling system. Keep your car on long enough to give the (trapped air) time to bleed out of your system.
  2. Let your car cool down. Once the car is cool, take off the radiator cap. Did the level of the radiator fluid go down? If it did, it means you bled the air out of your cooling system. Replace the radiator fluid, turn on the car, and let it run. Replace radiator fluid as needed.
  3. Step 3 (above) is the way you will remove air from your cooling system if you do not have a bleeder valve on your radiator. You will leave the cap off the radiator. You will run your car until it heats up. As the air dissipates, the radiator fluid level will go down. You will fill up your radiator fluid to the correct level. Be careful because the heated radiator fluid will be hot. Always wear leather gloves and safety goggles when working on your radiator.
  4. Once the air dissipates and you fill the fluid, shut off the car. Let the car cool down. Once the car is cool, put the radiator cap back on the radiator. You may have to put more radiator fluid in the radiator. The level may fall as the car cools down. Now it is safe to drive your car. You have removed the trapped air from your cooling system.
Tips:
Always wear gloves and safety goggles when working on your radiator.
Radiator fluid gets very hot when heated.
Check radiator fluid periodically.

Posted on Apr 14, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a reset button for the battery so the car can start after the battery been unhooked for a 2006 Buick Lucern


download buick lucerne 2006-2011 service repair manual

? 0:22
https://www.youtube.com/watch?v=rERlG9FPXbM
Dec 16, 2012 - Uploaded by Uribeadd819
DOWNLOAD BUICK LUCERNE 2006-2011 SERVICE REPAIR MANUAL ... How to replace rear brakes and ...

Nov 15, 2015 | Buick Cars & Trucks

1 Answer

How do I replace the water pump on a 2006 buick lucerne cx 3.8 v6


first take hose off, or drain from drain plug. antifreeze is what you are draining. Then get a 15 mm rachett and socket and pry tension pully back so you can remove belt. unbolt water pump and take off. Once off clean engine block with razor blade,or something to get old gasket off. put a thin layer of rtv blue permatex on new water pump. Now put new gasket on new water pump on top of the permatex . let dry and set up, this will keep the gasket from moving around when putting back on. follow the process backwards and should b 30 min job . GOOD LUCK YOU CAN DO THIS FOR SURE. ONE OF THE EASIER ONES.........................

Mar 31, 2015 | 2006 Buick Lucerne CX

1 Answer

How to remove water pump from buick lucerne of 2006?


This should help,
https://www.youtube.com/results?search_query=How+to+remove+water+pump+from+buick+lucerne+of+2006%3F

Sep 06, 2014 | Cars & Trucks

1 Answer

How to replace water pump on 2006 buick lucerne with 4.7l northstar engine


Remove air box & air tube loosen throttle body 2 clamps disconnect Hoses on pump area remove rear cover 4 10mm bolts from rear of pump disconnect two bolts on housing bottom then 4 bolts on center housing two more are on lower rear between eng & tranny the other two are front lower 8 total remove nut fuel line clamp disconnect Wiring move housing out pump area 2-3 inch disconnect tensioner & remove water pump 5 x 10 mm bolts install new pump & reassemble good look 2-3 hours

Apr 23, 2012 | 2006 Buick Lucerne

Not finding what you are looking for?
2006 Buick Lucerne Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...