Question about Mitsubishi Cars & Trucks

Open Question

Location transmission sensor valve body t.f.t

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
agent91
  • 2100 Answers

SOURCE: Where is the Audi A4, 2006 Multitronic (CVT)

The computer usually sits on the wall next to the driver's legs, but yours could be under the seats, or under the dash, that one I don't know, but it should be kept dry, not under the hood. The valve body is in the transmission. It is accessible from underneath, just under the filter, or on top I should say, holds all your shift solenoids etc.

Posted on Sep 28, 2010

Ad
  • 1796 Answers

SOURCE: Anyone know what position the torque converter

Hi!!
Here are a couple of diagrams of the line actuators in the transmission valve body. If you need additional assistance, just post a comment. Good Luck!!
ba9bcd6.gif


60f6cd8.gif

Posted on Oct 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the torque converter sensor located on the transmission?


Eric, The TTC Torque Converter Solenoid is located behind the side cover which has to be removed to access. I will post links for you.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

http://i33.photobucket.com/albums/d61/bon2k/misc5/DSC01802.jpg

1997 Buick LeSabre TCC sensor location Google Search

Trans Troubles Hard shifting gt frothy fluid Drivetrain

98 Buick Park Ave Ultra 3800 Series II Input and Output Speed Sensor...

Apr 04, 2016 | 1997 Buick LeSabre

1 Answer

Where is the trans range sensor located on a 2004 BMW 545 I


BMW transmission range sensor position Vehicle Parts ...

www.fixya.com/tags/transmission_range_sensor_position/auto.../bmw
BMW vehicle parts & accessories transmission range sensor position related ... i got a transmission fault warninig my bmw car 545i E60 it is a 2004 E60 bmw car ...location transmission dipstick 1997 bmw 328is if its a manuel transmission it ...

P0705 Transmission Range Sensor TRS Circuit Malfunction

www.obd-codes.com/p0705
Transmission Range Sensor Circuit Malfunction (PRNDL input) ... Later models with the transmission range sensor located in the valve body are a different ball ... What causes the P0705 code on a BMW 740i ('97) ... 2004-2015 OBD-Codes.com.Missing: 545

Nov 25, 2015 | BMW Cars & Trucks

2 Answers

Where is the tcc solenoid locatedd on a 1995 chevrolet cavalier 2.2l


located inside the transmission. You can access it by removing the trans inspection cover on the

Oct 23, 2013 | 1993 Chevrolet Cavalier

1 Answer

2000 ford explorer input turbine speed sensor. code po715 was pulled on the obd scanner.does any 1 no were this sensor is located at on my transmission, i beleiv e it has the 55r5e trans but not quit sure....


the is also known as sensoer c it is your pressure control solenoid. if you drop the transmission pan and remove the transmission filter it is on the side of the valve body. DO NOT REMOVE THE VALVE BODY PLEASE12_7_2012_2_21_36_am.gif

Dec 07, 2012 | 2000 Ford Explorer

1 Answer

Where is transmission range sensor for 99 plymouth?


The TRS is a speed sensor located in the valved body, attached to the transaxle. It has a connector on one side, and the other side is a bolt holding it to the transaxle, and a rod plugged into the valve body. The transmission range sensor is located within the transaxle.To replace it or to check if the part fits you need to take apart the oil pan and valve body.


Here summary procedure:


Take off the battery negative cable.
Bleed oil.
Remove air cleaner assembly.
Put lever in first gear.
Disconnect the gear shift cable from lever.
Remove the manual valve lever from the shaft.
Disconnect the cable from TRS connector.
Raise vehicle on hoist.
Remove all the transmission oil pan bolts
Take off the transmission oil pan .
Remove the transmission oil filter
Undo the valve body-to-transaxle case bolts.
Remove the park rods from the guide bracket and pull off the valve body from transaxle.
Put the valve body on a work bench
Undo the t-25 torx screw holding the TRS.
Do operations in reverse order, when refitting torque the valve body bolts to 105 in lbs.


I hope this helps you,Ken.

Sep 14, 2012 | 1999 Dodge Caravan

1 Answer

2004 jeep code 1763 what to do


P1763 - Governor Pressure Sensor Voltage Too High

This code is refer for the governor pressure sensor which is located in the valve body of the transmission. If getting power to the sensor and the wires are not open or shorted then the sensor will need to be replaced.

GOVERNOR SOLENOID AND PRESSURE SENSOR
REMOVAL

Hoist and support vehicle on safety stands.
Remove transmission fluid pan and filter.
Disengage wire connectors from pressure sensor and solenoid (see picture)
Remove screws holding pressure solenoid retainer to governor body.
Separate solenoid retainer from governor (see picture)
Pull solenoid from governor body
Pull pressure sensor from governor body.
Remove bolts holding governor body to valve body.
Separate governor body from valve body
Remove governor body gasket.

INSTALLATION
Before installing the pressure sensor and solenoid in the governor body, replace O-ring seals, clean the gasket surfaces and replace gasket.

Place gasket in position on back of governor body
Place governor body in position on valve body.
Install bolts to hold governor body to valve body.
Lubricate O-ring on pressure sensor with transmission fluid.
Align pressure sensor to bore in governor body.
Push pressure sensor into governor body.
Lubricate O-ring, on pressure solenoid, with transmission fluid.
Align pressure solenoid to bore in governor body
Push solenoid into governor body.
Place solenoid retainer in position on governor
Install screws to hold pressure solenoid retainer to governor body.
Engage wire connectors into pressure sensor and solenoid Install transmission fluid pan and (new) filter.
Lower vehicle and road test to verify repair.

zjlimited_748.gif

1 - PRESSURE SOLENOID RETAINER
2 - GOVERNOR

zjlimited_749.gif

1 - PRESSURE SENSOR
2 - PRESSURE SOLENOID
3 - GOVERNOR


Hope helps.








Sep 29, 2011 | 2004 Jeep Grand Cherokee

1 Answer

Location of speed input sensor on 2006 pontiac grand prix


The input speed sensor is located in the transmission. It is attached to the valve body . You can locate it by just removing the transmission side pan.

Aug 26, 2011 | 2006 Pontiac Grand Prix

1 Answer

What this mean p1756


P1756 what does this mean: It is transmission related, difinition is: transmission governor pressure not equal to target...its a transmission code this is a common failure... have seen these governer pressure sensors fail often.... most codes are governer pressure sensor volts too high or low, governer pressure sensor not equal to target.. Most of the time you replace the governer pressure sensor and soleniod.. I would recommend you to fix this problem if not you will end up burning the clutches in the trans... The trans pan needs to be removed....the sensor is bolted to the valve body and is located on the pass front side of the valve body.

Jun 01, 2010 | 2000 Dodge Durango

1 Answer

I need to change the Transmission control solenoid on my 04 pontiac grandprix 3.8L, 3800 series 3..do you have a diagram where i can locate it. also the transmission fluid was changed yesterday..the only...


Check or replace your TPS (throttle position sensor). The other reason for hard shift is a worn Boost valve and will need to be replaced, or a faulty transmission fluid EPC (electronic pressures control valve). Both Boost valve and EPC are located in the Valve Body and can be replaced with out dropping the valve body, but have to drop the transmission pan. Good luck and keep me posted, be glad to answer any questions you may have.

Jan 14, 2010 | 2004 Pontiac Grand Prix

2 Answers

I have a 1999 Jeep Cherokee with 4 wheel drive, when I start out the transmission takes a long time to shift into high gear, probably around 4o to 50 MPH. Someone said it is the transmission modual and has...


This is possible, to check the valve by going under your jeep and looking at the back part of the transmission. You will see a valve with a vacuum line going to it, it is usually located at rear of trans just above trans pan. To check pull vacuum line off, if fluid comes out the valve is bad and needs to be replaced. They can be purchased at most auto parts stores readily. If no fluid the trans may just need serviced.

Oct 04, 2009 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...