Question about 1999 Chevrolet Express

Open Question

Thermostat on 1999 chevy express 3500 5.7litres

How to change a thermostat on a 1999 cevy express 3500

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 333 Answers

SOURCE: 1999 Chevy express 454 belt diagram.

454 with ac and a.i.r.
bc0ae5d.gif

Posted on Oct 17, 2009

Testimonial: "You da Man!!!!!!!!!!!!"

Ad
perkins48
  • 14378 Answers

SOURCE: chevy express 1999 didn't start, i have a code p1336. i've change the crank shaft sensor but it didn't strat and i have a P1336 code again


Trouble Code: P1336

CKP Sensor System Variation Not Learned
Possible Causes:


Set the parking brake and block the drive wheels for safety. Verify the hood is closed. Read the trouble codes. If a code is set, refer to that code. Start the engine. Allow engine temperature to reach at least 158?F (70?C). Then key off. Select Crankshaft Position Variation Learn procedure on Scan Tool & start the vehicle. Apply the brake pedal firmly and verify the selector is in Park. Increase accelerator pedal position until fuel cutoff is reached at the test rpm (e.g., 5150). Quickly release the accelerator pedal after fuel cutoff is reached. The CKP system variation compensating values are learned when the engine speed (rpm) decreases back to idle speed and the procedure terminates. Read the trouble codes and recheck for DTC P1336. If DTC P1336 runs and passes, the CKP system variation "learn" procedure is complete. If not, look for other codes. If no codes are set, repeat the test procedure.

Posted on Jul 24, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Chevy express 1500 fuel relay location


    images for 2002 Chevy express 1500 fuel relay location


    More images for 2002 Chevy express 1500 fuel relay location

    GM Fuel Pump Relay Testing - YouTube

    ? 27:40
    www.youtube.com/watch?v=McnXLcJNVfI

    Mar 14, 2012 - Uploaded by ScannerDanner
    1999 Chevy Suburban with no fuel pressure. The following is covered in this video: 1. How to test a fuel pump relay in a power distribution box.


Oct 23, 2015 | Cars & Trucks

1 Answer

Where is the termastat on 1999 chevy veture


The upper rad hose is attached to the thermostat housing containing the thermostat. It is under the exhaust crossover pipe area and is not an easy to change

May 09, 2015 | 1999 Chevrolet Venture

2 Answers

Where is the obd port located on the chevy express 2500


Hi there, I'm not sure if you're still looking, but I found your car's obd if you're still looking for it: http://bit.ly/16kzNAF

Feb 16, 2013 | 2006 Chevrolet Express

1 Answer

2006 Chevy express van. Normally runs one mark below 1/2 mark. Lately ocassionally goes 1-2 marks above half way (usually when sitting idling). Have had coolant changed (Chevy dealer) and new radiator cap...


You've already eliminated #3 and #6, so keep checking...

Priority Action Part Type Cause
1 Inspect Radiator Cooling System Clogged.
2 Inspect Radiator Radiator Fins Obstructed.
3 Inspect Radiator Cap Worn or Damaged Radiator Cap.
4 Inspect Radiator Fan Motor Faulty Fan Motor.
5 Inspect Belt Incorrectly Routed, Adjusted (Tensioned), Missing or Worn Drive Belt(s).
6 Inspect Thermostat Faulty Thermostat.
7 Inspect Water Pump Worn, Cracked or Leaking Water Pump.
8 Inspect Radiator Fan Relay Intermittent Failure

Jul 16, 2011 | Chevrolet Express Cars & Trucks

1 Answer

Change starter 2005 chevy van express


first disconnect batt positive. jack vehicle up on passenger side. you can see starter at rear of engine. you may have to remove plastic around bellhousing to remove starter. There are two bolts holding starter in place.usually 15 mm socket. there is a small nut holding wire. 5/16 or 11/32 socket.. remove it. large nut usually 13mm socket. once removed just reverse procedure. leave comment if successful.

Mar 21, 2010 | 1999 Chevrolet C2500

1 Answer

Drove it home fine. Tried to restart without


you should have the ignition module tested most auto parts stores can do this it is a common problem

Mar 13, 2010 | 1999 Chevrolet Express

2 Answers

The fan went out on my heater is this a fuse problem? 1999 Chevy Express


It could be:

1. A fuse
2. The fan switch
3. The motor itself

Dec 08, 2009 | 1999 Chevrolet Express

2 Answers

What size deep well socket do you use on 1999 chevy blazer?


usually its either 13 mm 14 or 15 mm socket thats all and just make sure you get all of the old gasket off when your taking the old one off or you will have a leak when putting the new 1 on just take a razor blade to it thats al..

Thanks,
Steve

Jan 18, 2009 | 1999 Chevrolet Blazer

Not finding what you are looking for?
1999 Chevrolet Express Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...