Question about 2006 Hyundai Tucson

1 Answer

CD stuck in 2006 Hyundia Tucson -How do you remove the CD/radio?

(CDP 2 Error) I removed all of the screws from the lower panel covering the center console but was still unable to remove the cover in order to get to the radio.

Any ideas on what to do? Pictures?

Posted by on

  • dap21 May 18, 2009

    Thanks...gave it a shot. After a "File Check" came back with a CDP Error 7. Displayed the new error twice and then switched back to CDP Error 2.

  • dap21 May 18, 2009

    Thanks...gave it a shot. After a "File Check" came back with a CDP Error 7. Displayed the new error twice and then switched back to CDP Error 2.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,959 Answers

Answered a similar problem last week. Disconnect the negative battery cable for 10min. When you re-connect, the stero should reset and you should be able to get the CD out. If this works, will save you a lot of aggravation without having to remove the stereo. Best of luck!
Greg

Posted on May 18, 2009

  • Greg Margossian
    Greg Margossian May 18, 2009

    Sorry the reset didn't work. I scoured the web to find this link step by step to remove a stereo in a Tucson. This was a German model with a manual shift but the instructions should be very similar. Best of luck on your repair. Wish I could have been more help.

    Greg



    http://hyundaisuvforum.yuku.com/forum/vi...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing steering column shroud on a 2006 sierra 3500, no screws where videos show to remove them there's a recess area but no screws in the locations indicated


Steering Column Trim Cover Replacement

Important: You must check for 2 pan head tapping screws (1,2) in the lower trim cover before removal.
If necessary, remove the 2 pan head tapping screws (1,2) from the lower trim cover (3). Remove the lower trim cover (3).
If screws are not present in the lower trim cover, proceed to the next step.
Gently unsnap the lower trim cover from the upper trim cover.

Important: You must check for 1 TORX® head screw (1) in the upper trim cover (2) before removal.
If necessary, remove 1 TORX® head screw (1) from the upper trim cover (2).
If a screw is not present, remove the upper trim cover (2).

Dec 01, 2016 | 2006 GMC Sierra 3500

1 Answer

How to remove cd player on 1999 acura el


acura cd player is the last to be removed. first start with center console.
push the seats for and remove the 2 screw on the side of console,2 more inside the storage,remove shifter cover and 2 more waiting underneath.remove ashtray,more screws behind,remove center console 3-4in.and now the radio cover is free to be removed. 4 more screw holding the radio.pull slowly and disconnect the wires behind.install in revers order.
dont forget!!! Acura radio have security code.
good luck

Apr 04, 2014 | Cars & Trucks

1 Answer

How to change the alternator in my 2005 Hyundia Tucson? Can not get the bottom bolt out. What do I remove to get at it.


On the Tucson it is quite easy..... have changed 2 on my 2005 Tucson.....do it in this sequence and you shouldn't have any problems 1st disconnect both cables on the battery then do it 2nd remove serpentine belt... 3rd jack up the car at least where the tire is at least 4 inches off the ground.. 4th remove tire.. 5th remove inner splash guard.... 6th remove brake riser bracket... (2 bolts)... 7th remove upper bolt on alt... 8th remove upper alt bracket (2 bolts)....9th this is the hard one remove the lower bolt on the alt.... the bolt cannot be removed the lower mount actually drops into the mount.... it lifts up.... disconnect both cables one snaps in the other bolts on reverse the order and you can have it done in less than 2 hrs total time

Aug 19, 2010 | 2005 Hyundai Tucson

1 Answer

I need a diagram on how to remove a heater core in a 1994 mercury villager


big job. entire heater plenum has to come out. 6 hour job.

http://groups.yahoo.com/group/villagerquest/

Instrument Panel Removal
  1. stv~us~en~file=ani_caut.gif~gen~ref.gif WARNING: THE BACKUP POWER SUPPLY ENERGY MUST BE DEPLETED BEFORE ANY AIR BAG COMPONENT SERVICE IS PERFORMED. TO DEPLETE THE BACKUP POWER SUPPLY ENERGY, DISCONNECT THE BATTERY GROUND CABLE AND WAIT 10 MINUTES.
    Disconnect the battery ground cable (14301).
  1. Remove the access cover from the bottom of the steering wheel (3600) and disconnect the driver side air bag module electrical connector.
  1. Open the glove compartment, then pull the access panel from the top of the glove compartment. Disconnect the passenger side air bag module electrical connector.
  1. Remove the four console compartment plastic screws or C/D changer cover plastic screws (if equipped) and the console compartment door (045G36) or C/D changer cover.
  1. Remove the two LH inner instrument panel lower cover screws and the plastic nut.




  1. Remove LH inner instrument panel lower cover (044L97) and disconnect the foot lamp electrical connector.
  1. Remove the two RH inner instrument panel lower cover screws and the plastic nut.
  1. Remove RH inner instrument panel lower cover (045G22) and disconnect the foot lamp electrical connector.
  1. Remove the plastic screw, two lower screws, two center bolts, two upper screws and the screw at the instrument panel bracket, then separate the glove compartment from the instrument panel (04320). Disconnect the glove compartment striker plate catch electrical connector.




  1. Remove the two instrument panel to passenger side air bag module bracket bolts.




  1. Remove the four passenger side air bag module nuts and the passenger side air bag.
  1. Remove the RH instrument panel screw.




  1. Remove the four C/D changer screws.




  1. Remove the C/D changer and disconnect the C/D changer electrical connector.
  1. Remove the instrument panel ash receptacle (04810).
  1. Remove the two upper center instrument panel finish panel screws and the two lower center instrument panel finish panel screws.




  1. Remove the center instrument panel finish panel and disconnect the cigar lighter socket and the cigar lighter illumination lamp electrical connectors.
  1. Remove the two instrument panel ash receptacle bracket screws and the instrument panel ash receptacle bracket. Disconnect the instrument panel ash receptacle lamp electrical connector.
  1. Carefully pry the center A/C register from the instrument panel.




  1. Remove the hose from the ambient temperature sensor and disconnect the ambient temperature sensor electrical connector (if equipped).
  1. stv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result. Refer to Module Service Procedures in Section 18-01 .
    Remove the four radio chassis bracket screws and pull the radio chassis (18806) and climate control assembly from the instrument panel.
  1. Disconnect the three radio chassis electrical connectors, the antenna lead, the three climate control electrical connectors and remove the radio chassis and climate control assembly.
  1. Remove the plastic screw, the two instrument panel steering column cover screws and the instrument panel steering column cover (04459).
  1. Remove the four LH instrument panel reinforcement bolts and the LH instrument panel reinforcement. Disconnect the diagnostic electrical connector.




  1. stv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result. Refer to Module Service Procedures in Section 18-01 .
    Remove the instrument cluster (10849). Refer to Section 13-01A (electronic cluster) or Section 13-01B (conventional cluster) for the removal procedure.
  1. Disconnect the seat belt warning chime electrical connector. Remove the two seat belt warning chime screws and the seat belt warning chime.
  1. Remove the four steering column nuts and lower the steering column assembly.
  1. Remove the two LH instrument panel screws.




  1. Remove the center instrument panel screw.




  1. Remove the LH inner duct screw and the LH inner duct.




  1. Disconnect the power outside rear view mirror control switch electrical connector.
  1. Pull off the upper portion of the LH inner door opening weatherstrip. Remove the windshield side garnish moulding (03598).




  1. Pull off the upper portion of the RH inner door opening weatherstrip. Remove the windshield side garnish moulding.
  1. Remove the instrument panel upper moulding (04268) and disconnect the sun sensor electrical connector (if equipped).
  1. Remove the light sensor amplifier from the top right side of the instrument panel and disconnect both light sensor amplifier upper and lower electrical connectors (if equipped).




  1. Remove the instrument panel center nut.




  1. Remove the two instrument panel upper bolts.
  1. Remove the instrument panel from the vehicle.

May 20, 2010 | 1994 Mercury Villager

2 Answers

How do I remove the fan switch to replace it on the dash under the radio?


Have your radio code before you pull it out with the right radio tool. This pull would involve removing this parts.
  1. Glove compartment
  2. Driver side panel
  3. Center top dash board
  4. Defrost switch carrier
  5. Radio unit
  6. Center lower half of dash
So I'd suggest go to your local public library and look for your car manual. It would be either Chiltons or Clymers manual, it's not as precise a Bentley VW Official factory repair manual. Yes it really involves taking all those parts out just to get to the rotary switch.

Apr 20, 2010 | 2000 Volkswagen Beetle

1 Answer

How do you remove a radio from a 2007 Tuscson city


Don't know the 'City' model... but if it's anything like the REGULAR Tucson, remove the shifter knob (remove access place to two phillips screws - remove screws). Remove shifter knob. Pop out shifter cover plate (snaps in and out). Remove approx 6 phillips head screws holding the metal plate above the shifter pedistal. Pop out the cosmetic cover around the radio, AC control panel and vents (wire harness connectors to digital clock, fog lamps and emergency flashers (and pass airbag light). You now have access to the phillips screws securing the audio/radio unit.

Oct 31, 2009 | 2007 Hyundai Tucson Limited

1 Answer

Fixing heater core on Mercury Villager front one


go here for lots of help

http://groups.yahoo.com/group/villagerquest/

Heater Case Removal
  1. Drain the engine coolant. Refer to Section 03-03 for the procedure.
  2. Disconnect the battery ground cable (14301).
  3. Disconnect the heater water hoses (18472) from the heater core (18476) at the bulkhead.
  4. Remove the instrument panel lower center panel (04494). Refer to Section 01-12 for the removal procedure.
  5. Remove the glove compartment and LH instrument panel lower cover (044L97). Refer to Section 01-12 for the removal procedure.
  6. Remove the instrument panel ash receptacle (04810).
  7. Remove the two upper center instrument panel finish panel screws and the two lower center instrument panel finish panel screws.




  8. Remove the center instrument panel finish panel (044D70) and disconnect the cigar lighter socket and cigar lighter illumination lamp electrical connectors.
  9. Remove the four radio chassis bracket screws and pull the radio chassis (18806) and climate control assembly from the instrument panel (04320). Disconnect the radio chassis electrical connectors, the antenna lead, the three climate control electrical connectors and remove the radio chassis and climate control assembly.
  10. Remove the two heater outlet floor duct screws. Remove the heater outlet floor duct (18C433).




  11. Remove the four RH instrument panel lower reinforcement bolts and the RH instrument panel lower reinforcement (045F08), then the four LH instrument panel lower reinforcement and the LH instrument panel lower reinforcement.
  12. Remove the anti-lock brake control module (2B373). Refer to Section 06-09 for the removal procedure.
  13. If equipped, remove the speed control amplifier. Refer to Section 10-03 for the removal procedure.
  14. Remove the electronic door lock control processor (14B001). Refer to Section 01-14A for the removal procedure.
  15. Remove the passive restraint control module. Refer to Section 01-20B for the removal procedure.
  16. Remove the two center duct screws and remove the center duct (19D633).




  17. Remove the two ground wire bolts.
  18. Remove the three U-bracket-to-chassis nuts.




  19. Remove the four U-bracket bolts and remove the U-bracket.


  20. Remove the two RH and the two LH instrument panel bracket bolts and remove the instrument panel brackets (042C74).
  21. Remove the RH inner duct.
  22. Remove the LH inner duct.
  23. Remove the two accelerator pedal and shaft bolts and then the accelerator pedal and shaft (9725).
  24. Remove the accelerator pedal stop screw and then the accelerator pedal stop (9816).
  25. Remove the heater outlet duct screw and remove the heater outlet duct.
  26. Remove the temperature blend/panel bypass door actuator motor. Refer to the procedure in this section.
  27. Remove the panel/floor/defrost door actuator motor. Refer to the procedure in this section.
  28. Remove the three A/C evaporator register duct screws and remove the A/C evaporator register duct.
  29. NOTE: The A/C evaporator/blower motor assembly does not have to be removed in order to remove the heater assembly.

    Remove the four A/C evaporator/blower motor assembly screws to aid in the removal of the heater assembly.
  30. Remove the four heater assembly screws.
  31. Remove the heater assembly.

Sep 30, 2009 | 1996 Mercury Villager

1 Answer

My cd player will not accept cd's (the tray inside will not come down) so I think I'll have to buy one from a salvage car - Question is (1)any thoughts on fixing the existing cd (2) how would I go about...


REMOVE THE RADIO FUSE FOR ABOUT 30 SECONDS THIS MAY RESET THE RADIO/CD PLAYER.

IF YOU DO INSTALL ANOTHER RADIO IT WILL HAVE TO BE PROGRAMMED AT A DEALER.

REMOVE THE COVERS ON THE SIDES OF THE DASH.

REMOVE THE GLOVE BOX ASSEMBLY.

REMOVE THE KNEE BOLSTER UNDER THE STEERING COLUMN.

PUT ON THE PARK BRAKE AND SHIFT THE CAR INTO NEUTRAL.

REMOVE THE BEZEL AROUND THE RADIO, CHECK THE LOWER CORNERS FOR SCREWS, PULL OUT CAREFULLY ON THE BEZEL.

REMOVE THE RADIO.


Jul 12, 2009 | 2006 Pontiac G6

1 Answer

I need to replace an ignition switch on my 1999 Chrysler Sebring convertible, how do I remove the dashboard


This is for the ignition switch like you are asking for:

Ignition Switch REMOVAL & INSTALLATION Cirrus, Stratus, Sebring Convertible and Breeze CAUTION
The Supplemental Inflatable Restraint (SIR) system must be disarmed before working around the steering column. Failure to do so may cause accidental deployment of the air bags, resulting in unnecessary SIR system repairs and/or personal injury.
  1. Disarm the air bag system, as described in Section 6.
  2. Remove the left end instrument panel cover/fuse panel and remove the retaining screw holding the end of the instrument panel top cover.
  3. Remove the instrument panel center bezel.
  4. Remove the screws that secure the instrument panel top cover to the center of the instrument panel.
  5. Lift the instrument panel top cover enough to gain access to the knee bolster attaching screws.
  6. Remove the lower knee bolster attaching screws and knee bolster from the vehicle.
  7. Remove the lower steering column cover attaching screws. Pull down on the lower cover to clear the ignition key cylinder and key release (if equipped).
  8. Remove the lower steering column cover, sliding the cover forward while holding down the steering wheel tilt lever.
  9. Tilt the steering wheel down to the fully lowered position and remove the upper steering column cover.
  10. Remove the screws that hold the combination switch to the ignition lock housing.
  11. Place the ignition lock cylinder in the RUN position.
  12. Insert a small prying tool into the hole in the lower cover and depress the cylinder release tab.
  13. Remove the ignition lock cylinder from the steering column.
  14. Unfasten the electrical connectors from the switch.
  15. Using a No. 10 Torx® bit, remove the ignition switch mounting screw.
  16. Depress the retaining tabs and remove the switch. To install:
  17. Place the ignition switch in the RUN position. Be sure the actuator shaft in the lock housing is also in the RUN position.
  18. Install the switch, making sure the switch snaps over the retaining tabs.
  19. Install the retaining screw.
  20. Connect the wiring to the ignition switch.
  21. Install the ignition lock cylinder.
  22. Install the 2 combination switch mounting screws.
  23. Install the lower and upper shrouds.
  24. Install the knee bolster to the lower dashboard panel and tighten the lower knee bolster attaching screws.
  25. Install the screws that secure the instrument panel top cover to the center of the instrument panel.
  26. Install the instrument panel center bezel.
  27. Install and tighten the screw holding the end of the instrument panel top cover. Install the left side instrument panel/fuse panel cover.
More coming.....

Jun 26, 2009 | 1999 Chrysler Sebring

1 Answer

How do I remove the radio from a 1998 Honda CR-V?


UNSNAP PUSH-PIN FASTENERS FROM BOTTOM OF CENTER CONSOLE
AND REMOVE BOTTOM PANEL.
2. EXTRACT 4 SCREWS FROM BOTTOM EDGE OF BEZEL. EXTRACT 4
SCREWS FORM INSIDE DASH BELOW POCKET. PULL CUP HOLDER/
POCKET ASSEMBLY OUT OF DASH AND REMOVE.
3. OPEN GLOVE BOX AND REMOVE STOPPERS. EXTRACT 2 SCREWS
FROM RIGHT SIDE OF CENTER DASH BEZEL..
4. FROM BELOW STEERING WHEEL EXTRACT 2 SCREWS FROM BOTTOM
EDGE OR PANEL, UNSNAP UPPER EDGE OF PANEL, UNPLUG, AND
REMOVE.
5. UNSNAP TOP EDGE OR CENTER LOWER BEZEL, UNPLUG, AND REMOVE.
6. EXTRACT 2 SCREWS FROM SIDES OF POCKET.
7. UNSNAP RADIO/AC CONTROL DASH BEZEL, UNPLUG, AND REMOVE.
8. EXTRACT 2 SCREWS FROM EACH SIDE OF THE RADIO BRACKET
ASSEMBLY TO REMOVE RADIO FROM DASH/AC BEZEL.

Apr 09, 2009 | 1998 Honda CR-V

Not finding what you are looking for?
2006 Hyundai Tucson Logo

1,218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...