Question about Dodge Neon

Open Question

My old shift solenoid has 2 dowel pins and new has 3 pins 2003 neon

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 52 Answers

SOURCE: where is the shift solenoid located on a 2003 dodge neon sxt

the trans shift solenoid pack is bolted to the side of the trans closer to the radiator. it is rather large and there are three 10mm bolts holding it to the trans. it is under the input speed sensor and just under the spot where the cooler lines go into the trans.

Posted on Apr 11, 2009

Ad
  • 1 Answer

SOURCE: 2002 Neon: how do you change a shift solenoid on a dodge neon...

Sell that piece of ****

Posted on Jun 15, 2010

  • 4044 Answers

SOURCE: what is the dowel pin locationfor a dodge neon 2.0 dohc on cam gears

Dowel pin? I've rebuilt the 2.0 in my Neon several times for various issues and never had to mess with a Dowel Pin. I'm not even seeing a reference to a Dowel pin in either of my books on that vehicle. If your talking about the Key way located on the Cam pulling that holds the timing belt that Cam shaft is keyed and it will only mount one way. That pin will be at the 12 o'clock position when you put the timing belt back on but don't use that by itself to align the motor back properly. You need to have the crank at #1 TDC and you need to make sure the first two valves are closed with the first valve on the #2 cylinder open and the Exhaust valve closed, or second valve on the #2 closed to properly align the motor for the timing belt.

Posted on Nov 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

4 cyl. Auto trans. in limp mode. takin the shift solenoid out to re build it i fnd ripped wires. My question may seem should i re connect the first or cont with the shift solenoi


Unfortunately, you should have gotten the diagnostic codes for the transmission before messing with the shift solenoid. Most of those dodge shift issues are caused by input and output speed sensors.

Feb 09, 2016 | 2002 Dodge Neon

1 Answer

2000 ply. neon wont shift into overdrive


Plymouth transmission wont shift into overdrive Questions ...

www.fixya.com > Forum > Tags > transmission wont shift into overdrive
Plymouth transmission wont shift into overdrive related problems. Ask your Plymouth transmission wont shift into ... My 2000 plymouth neon is stuck in park.

Dodge Neon Questions - my neon will not go into overdrive ...

www.cargurus.com > Questions > Dodge > Neon

CarGurusSep 14, 2012 - my neon will not go into overdrive, it stays at 3500 rpms on highways - my neon does not ... 2003 Dodge Neon won't shift out of park 5 answers.

part2 replace the shift solenoid and speed switches in a ...

? 7:15
https://www.youtube.com/watch?v=2ETvtt8fcr4
Sep 10, 2009 - Uploaded by Sean Conley
Dodge Automatic Transmission Removal - Duration: 11:05. ...Dodge Neon Crushed By Mud Trucks ...

Jan 25, 2016 | Cars & Trucks

1 Answer

Knocking noise after replacing automatic transmission in 98 ford escort zx2 4cylinder


Three most likely causes are: #1 You forgot to tighten up all the torque converter to flex plate nuts/bolts. #2 You cracked the flex plate during the transmission change. #3 You forgot to swap one or both of the alignment dowels from the old transmission to the new one during the change. These are hollow dowel pins. They go between the bell housing of the transmission and the engine block. Failure to have both dowels in place will lead to the flex plate cracking [see #2]

Mar 10, 2015 | 1998 Ford Escort

1 Answer

Won't shift out of 1st. I have already replaced the input and output speed sensors as well as the shift solenoid. Still wont shift out of 1st and speedometer still wont work but tack does.


your input output speed sensors check voltage at sensor check plug see if you have voted and ground and put more than likely there's no voltage or no gtound

Mar 03, 2015 | 2002 Dodge Neon

1 Answer

What is the dowel pin locationfor a dodge neon 2.0 dohc on cam gears


Dowel pin? I've rebuilt the 2.0 in my Neon several times for various issues and never had to mess with a Dowel Pin. I'm not even seeing a reference to a Dowel pin in either of my books on that vehicle. If your talking about the Key way located on the Cam pulling that holds the timing belt that Cam shaft is keyed and it will only mount one way. That pin will be at the 12 o'clock position when you put the timing belt back on but don't use that by itself to align the motor back properly. You need to have the crank at #1 TDC and you need to make sure the first two valves are closed with the first valve on the #2 cylinder open and the Exhaust valve closed, or second valve on the #2 closed to properly align the motor for the timing belt.

Nov 21, 2011 | Cars & Trucks

1 Answer

Where can I find the trans shift solenoid pack for a 2003 dodge neon, and at what price?


they are available from the dealer. The prices will vary depending on your location. Give your local chrysler dealer a call for the most accurate price.

If your asking where on the car. It will be on the front of the transmission under the battery. It will be held in with 3 bolts. sometimes the new one will come with to many alignment pins. Make sure the new one looks exactly the same a the old one. Failure to remove the extra alignment pin will result in a leak.

Nov 21, 2010 | 2003 Dodge Neon

1 Answer

Where is the shift solenoid located on a 2003 dodge neon sxt


the trans shift solenoid pack is bolted to the side of the trans closer to the radiator. it is rather large and there are three 10mm bolts holding it to the trans. it is under the input speed sensor and just under the spot where the cooler lines go into the trans.

Apr 11, 2009 | 2003 Dodge Neon

1 Answer

02 Neon won't shift out of second gear in Drive


Sounds like the valve body is loose, warped or blown

Apr 07, 2009 | 2002 Dodge Neon

3 Answers

2002 neon speedometer jumping and won't up-shift


May be the connection at the output speed sensor, it supplies vehicle speed signal to Trans module. Same signal used for speedo. Have seen wires break right at the sensor. U may also want to check those codes especially in the TCM. See if it gives u an output speed sensor code or gear ratio code. If either of these are present, it's probably in the output not input sensor circuit. With a wiring diagram, u could ohm the wires to the TCM and wiggle wires and connector to check for an open.

Sep 26, 2008 | 2002 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...