Question about 1989 Hyundai Excel Hatchback

Open Question

No indicators oe hazards

No indicators or hazards

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 chrysler voyager does the hazard switch also control indicators


Turn signal flasher also lights the indicator. When you engage the hazards you switch out the T/S flasher which is then replaced by the hazard flasher. Then that flasher operates the indicators.

Sep 26, 2015 | Chrysler Cars & Trucks

1 Answer

When I turn on either left or right indicator both indicators light up


try pushing the hazard light switch again. what you have is the hazard lights in operation ( both sides indicators working) In normal indicator operation power from the flasher unit is directed to which ever side you select but by pressing the hazard light switch the indicator power lights up all lights.

Nov 13, 2014 | 1987 Citroen AX

1 Answer

Hazard lights come on when using indicators, no blown bulbs


the hazard lights are the indicators and all the hazard switch does is to connect all 4 indicators together. So I would check that the hazard switch has not being engaged or that the switch is faulty.

Aug 11, 2014 | Cars & Trucks

1 Answer

Indicator and hazard not working in clio


CHECK THE FUSE BOX FOR blown flasher fuse. Dont think thats it but its 1st step. I think it is a bad flasher switch, if its not the fuse. Replace the switch. mike

Jun 21, 2014 | 2002 Renault Clio

1 Answer

I do not have any turn signals or hazard light on my 2000 ford focus zetec how do i correct this


There is a flasher unit that controls both the normal indicators and hazard flashers, on a 98 ford escort it is fixed to the base of the indicator stalk switch, if you remove the shroud that covers the switches around the top of the steering column you can see the flasher unit, usually it is black and just plugs in to the bottom of the hazard and indicator switch. The unit should have an ignition supply to it as well as a perm ant supply when the hazard switch is pushed down. Sometimes these switches get sticky contacts so if you bang the switch on and off a few times it can sometimes make the contacts work and then then all the indicators start working again.

May 01, 2014 | 1998 Ford Escort

1 Answer

Hazards indicator problem


Call the aprt store and ask them if there is a seperate flasher for the hazard, if there is this is likely broken. If there is not the switch might be broken...

Apr 19, 2014 | 2001 Isuzu Rodeo

1 Answer

Its 51 plate. i had to replace the hazard warning switch which is also the relay for indicators because my indicators and hazards were only working now and again now i have perfect hazards and no...


is a new hazard switch you replaced it with and check to make sure the hazard swith is coming all the way out if it hangs just a little bit it will be in a neutral position and the turn signals wont work and if thats not it your multi-fuction switch feeds the turn signal lights it could be faulty

Apr 13, 2013 | 2001 Volkswagen Beetle

1 Answer

Indicator Problem


when you noticed the indicator being on solid, but flashing with the hazards, are you inside your car? I mean have you gotten out of your car to check if the bulbs are working when the indicator thrown and when the hazards are on. A hard on indicator usually means that you have a bulb burnt out. The hazards will still flash as normal when inside the car even if a bulb is burnt out because the hazards do not run via the Electronic Flasher Module. The EFM is what detects a burnt out bulb

Aug 24, 2009 | 2005 Audi A3

2 Answers

No hazard lights


Check the hazard switch and the connector to hazard switch see if u have the power and earth to hazard switch if there is power and earth to switch then replace ur hazard switch its faulty but if there is no power and earth to switch then it has whirring problem

Jun 16, 2009 | 1997 Mitsubishi Mirage

1 Answer

Flashing Unit for Indicators Replacement


Most likely it's the hazard switch - the relay for the hazards and the turn signals is built into it. When they start to die, you will see erratic behavior with the turn signals and/or hazards, and eventually they'll both fail completely. Replace your hazard switch on the dash and you'll be good to go.

Aug 31, 2008 | 2000 Audi TT

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...