Question about 1994 Toyota Camry

1 Answer

Wont start , has new starter bat is fully charged turn key powers inside but wont start or click nothing

Posted by on

  • Jim Nickell
    Jim Nickell Dec 28, 2013

    is there a nutral safty switch on a automatic gearshift

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 35 Answers

Agree place in neutral and try to start . Possible bad safety neutral switch

Posted on Dec 28, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

sicaudio
  • 96 Answers

SOURCE: Car wouldnt start. Just a

check the main wire from the battery to the starter 1st if it is ok remove the starter and take it to any major parts store and them retest it on a bench machine (they do it free)

Posted on Aug 01, 2008

  • 12 Answers

SOURCE: 1994 Toyota Camry 4 cylinder Starting problems

your starter is bad.... the two contacts inside the solinoid are worn out only way to fix is replace the unit as a whole bet ya you get click click click then my start.. bet my life on this one been fixin toyotas for 20+ years

Posted on Dec 30, 2008

  • 19 Answers

SOURCE: 1994 Toyota Tercel Starter Problems

sounds to me that you have an igniton problem not a starter problem and or if you have or had an alarm system could be cause if u do give me feedback and i will explain but seems that your starter is fine from what u say but if you think in terms of the elemts to start a vehicle batery gives pwoer to ignition which sends to starter which gives spark etc i would check you ignition system something is causeing a short and not alowing starter to function

Posted on Feb 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lights work, radio works battery is new and fully charged but when I try to start it...nothing. No starter clicking..nothing


A mechanic would check for voltage at the starter. You should have battery voltage on the large cable, and power on the small wire when you turn the key switch to start.
There is a clutch switch or neutral safety switch in the circuit between the starter and the key switch that could have failed.

Jan 08, 2013 | 2001 Kia Rio

1 Answer

My Jeep won't start everything seems to work inside the jeep but when key is turned nothing happens, no clicking no nothing. I have "tapped" the starter to see if that would work and stilll...


start solenoid sounds like the culprit. the start is a breeze to replace. 2-3 bolts and the two power wires. make sure you disconnect the bat. once you have it off the auto parts store should check the starter for free. have them do that befor you buy a new one. also check the fuses if the starter and fuses are good then the ignition is the final link to this puzzle hope this helps

Sep 11, 2011 | 1994 Jeep Cherokee

2 Answers

I just replaced my ignition system and starter now i go to start it and it makes a weird clicking noise and wont start whats wrong?


Make sure you have all the wires right.The clicking is your starter not engaging.Was the starter new?Did you bench test the starter before installing it?

Feb 19, 2010 | 1992 Ford Explorer

1 Answer

I have a 2001 GMC sonoma 4.3 v6 that will not turn over. I can turn the key all the way but starter does not engage. New starter, New relay switch. I get power, all lights lite up, battery fully charged. I...


Try another starter and also try turning the crank bolt with a ratchet and socket to make sure that the crank isn't frozen in place. Do not leave the keys in the car when doing so. You don't want anyone messing around in the truck when trying that!

Jan 11, 2010 | 2001 GMC Sonoma Extended Cab

2 Answers

94 z wont start


You will have to check, at the starter, for power to the SMALL wire on the starter solenoid (which is on the starter) when turning the ignition switch to start.
If there is power to this wire ( usually purple ) and power at the LARGE cable ( from the battery ) at the starter end.....you need a starter.

If you do not have power at the small wire at the solenoid with the key in start position and battery power is OK.....check the safety neutral switch.Moving the shifter around a little can sometimes allow the car to start if the neutral switch is worn.

A new battery does not always mean a fully charged battery.
Try a boost from another car before testing the starter for power.

The battery cables need to be clean and tight....and check the ground to the engine as well.

Everything else may work OK with bad connections,they don't use the power the starter needs to turn the engine over.

Sep 08, 2009 | 1994 Chevrolet Camaro

1 Answer

Will not turn over with new batterie


check battery voatage with a volt meter. After verifying 12v or better at starter, check power at starter cable terminal and verify ground at block is good. Then put volt meter across both battery terminals and try to start car. If battery voltage shows 9.5 or less while attempting to crank, change starter.
(make sure that there is 12v at the starter trigger wire with key in "start" before replacng)
(By battery "hot" you mean it's charged, not getting hot, correct?)

Apr 30, 2009 | 2004 Jeep Liberty

1 Answer

99 tahoe with remote start no start problem.


Sounds like you may have a cable issue. You should have two positive cables one supplying power to starter and one powering vehicle. if the starter power wire is not getting good connection but other is then it will only click. check this wire for corrosion inside cable

Nov 14, 2008 | 1999 Chevrolet Tahoe

1 Answer

Wont start help!


Recheck the charge on the battery,make sure it's fully charged.Check all connections at the battery and at the starter.Possibly a bad starter.If the starter is ruled out,then look at the teeth on the flexplate/flywheel.I would remove the starter and test it.

Jul 13, 2008 | 1992 Cadillac DeVille

Not finding what you are looking for?
1994 Toyota Camry Logo

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...