Question about 1995 Ford Taurus

2 Answers

Cannot get belt on 1995 ford taurus - 1995 Ford Taurus

Posted by on

  • ronaldhendry May 18, 2009

    have got tensioner pulled back and still cant get belt on, any tips?

  • Mike Butler
    Mike Butler May 11, 2010

    Seat belt, Timing belt, accessory drive belt? Need more info to help you out like year ,Make,model, engine.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,674 Answers

The easiest pulley to reach & get to, is usually the last one i put belt over. Hope that is of some help.

Posted on May 18, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,959 Answers

Click on the link below, enter the year,make,model, and engine of your car. Then click on the type of belt you are installing on the left for a diagram. Best of luck!
Greg

http://www.mvreader.com/multiview/dayco/index.php?bgInterchange=1&l=n

Posted on May 18, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2039 Answers

SOURCE: 1995 Ford Taurus brake pad replacement

the piston need to be turn clock wise and push at the same time make sure when you turn it the rubber around the piston dont get damaged it stick to the piston and get torn before you turn just make sure it not sticking to the piston at the auto part store they sell the toll to turn the piston its cheap$$ hope it FIXYA our post thanks pierre

Posted on Jul 06, 2008

jmeredith
  • 417 Answers

SOURCE: 1995 FORD TAURUS 3.0 V6

hi,

let me clarify the belt names for you before that, the fan or serpentine belt is the belt which all the accessories run on like the alternator and power steering pump and is different from the timing belt completely. the timing belt is hidden away and you cannot see it on most cars and keeps the camshaft in sequence with the crankshaft, Im not entirely sure but I believe ford V6s have a timing chain. heres the deal, the idler tensioner pulley has to have some tension put on it to bend it up and out of the way while you place the serpentine belt, study the ider tensioner pulley closely and the diagram under the hood, the idler pulley has a large bolt in the middle which you have to put a socket and wrench on .using force against the spring loaded pulley, either push down or up on the pulley with the wrench to temporarily give you the clearance needed to set the belt and gently release, (having a helper helps) once you doublecheck that the belt is PERFECT then start the car. My 83 LTD's idler pulley is adjusted with a bolt, I believed they have changed it to the spring loaded design that I spoke about above, if its the spring loaded design, that should do it,
good luck

J

Posted on Jul 12, 2008

  • 1 Answer

SOURCE: ignition switch in a 1995 ford taurus

my 1995 taurus dont start i change the fual pump and filter also ignition control mod what else could it be

Posted on Feb 05, 2009

  • 7353 Answers

SOURCE: 1999 ford Taurus serpentine belt routing diagram

http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7021

Posted on Nov 10, 2009

csmock132
  • 4669 Answers

SOURCE: 2001 ford taurus 3.0 liter ohv serpentine belt

3.0 OHV Vin U24dba77.gif

Posted on Apr 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove ac compressor for 1995 taurus 3.8L


You'll need to remove the belt. Unplug the compressor electrical connector. Remove any brackets holding the front of the compressor. Unbolt the four bolts that go thru the compressor, and disconnect the 2 lines. Probally best to do from underneath.

May 05, 2010 | 1995 Ford Taurus

1 Answer

I cant find the belt diagram for my 95 ford taurus


Go to your local Napa store, they should be able to print you out a belt routing diagram.

Nov 07, 2009 | 1995 Ford Taurus

1 Answer

1995 ford taurus,broke bolt on tensioner pully while trying to replace belt, now what??


was this the bolt in center of the tensioner pulley? if so you will need to remove and replace the tensioner assembly, if not which bolt did you break?

May 26, 2009 | 1995 Ford Taurus

1 Answer

Rattling sound inside engine on acceleration


possibly the bearings in the water pump,but that should have been replaced when the timing belt was done,because of the work involved

May 16, 2009 | 1995 Ford Taurus

1 Answer

My car is cutting off


if the car has trouble starting it's probably a battery issue.

if you have trouble only when it's running, it's most likely an alternator gone bad (Possibly just a slipping Belt.) but it sounds like the alternator would not be supplying the needed voltage to run. Check the tension on the belt, if it's good then have your alternator checked.

Mar 23, 2009 | 1995 Ford Taurus

2 Answers

Does a 1995 ford taurus have a timing belt?


The 3.0 and 3.8 V6 have a timing chain not a belt, lasts life of engine in most cases

Mar 09, 2009 | 1995 Ford Taurus

2 Answers

My 1995 ford taurus is running hot


It sounds like the cooling fan is not working. Turn on the a/c and see if it comes on. Dont forget to rate.

Mar 08, 2009 | 1995 Ford Taurus

1 Answer

Belt for ford turas


All manufacturers place a sticker in the engine compartment w/ the belt routing diagram, if u can't locate it, check your owners manual, if u don't have the manual, let me know what year the Taurus is, I'll research it.

Dec 10, 2008 | 1995 Chrysler LeBaron

2 Answers

ALTERNATOR BELT


can be done manually, and go to autozone.com you might find some information for the belt

May 27, 2008 | 1988 Ford Taurus

Not finding what you are looking for?
1995 Ford Taurus Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...