Question about 2005 Suzuki Forenza Wagon
Can you tell us what told you that.
2: your car dash
3: your scan tool?
if a real scan tool it will show, P0700
p0 means federal std. codes....
P0700 Suzuki - Transaxle Control System Malfunction
P0178 i cant find. please post full numbers and letters. all count
this engine is hard to work on
its a Frankenmix car, Suzuki, Daewoo, GM-Holden mix.
my wild guess it has GM engine controls, so getting good info is hard.
but is at alldata.com , log in see diagnostics section for codes.
Posted on Jan 21, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
THERES A FUSE BOX THAT SITS INSIDE THE HOOD OF YOUR CAR BY YOUR BATTERY AS WELL AS ONE BY THE SIDE PANEL BY YOUR DRIVER SIDE. EITHER SPOT SHOULD HAVE A FUSE THAT GOES TO YOUR RADIO. I HOPE THIS HELPS YOU!
Posted on Apr 28, 2009
SOURCE: warning light on dash
that would be the "Speed sensitive power steering" warning light.
need to have your power steering checked. First thing to do before taking your car somewhere is to check your power steering fluid level.
Posted on May 06, 2009
SOURCE: p0496 engine code 2005 suzuki
The ECM or computer needs a reflash done to it. The code is for the EVAP system. Takes over a hour to check the EVAP system and to reprogram the computer. Then the idle speeds need to be relearn. I know, I work on them. Don
Posted on Jul 25, 2009
Check if the kill switch is engaged. Check for faulty starter solenoid or disconnected solenoid wire. Check for defective ignition switch. Check for defective starter motor.
Posted on Aug 10, 2009
hi im not sure on this particular model but there a few easy ways to check.... take the spark plugs out, remove the broken belt, shine a light down the holes and look for dammdge, if you cant see anything you can turn the crank but it is a tricky job because you can ruin the engine so if your unsure get a mechanic to do it.. or your other alternative is to remove the head and have a look but you will need a new head gasket kit, timing belt and tensioner kit etc .. it is important that you do not turn the engine over when the belt is disconected in any way UNTIL you know for sure that valves wont hit pistons, even bending a valve will not be very noticable but when its all back together you will deffinately notice and will have to pull it all back apart
Posted on Feb 10, 2010
Testimonial: "Really Fast Reply with very good information. THANKS!!"
Tips for a great answer:
Oct 14, 2015 | 2006 Suzuki Forenza
Apr 21, 2015 | 2005 Suzuki Forenza Wagon
Jul 12, 2014 | 2005 Suzuki Forenza Wagon
Jun 24, 2014 | 2005 Suzuki Forenza
Mar 17, 2013 | 2005 Suzuki Forenza
Feb 09, 2011 | 2005 Suzuki Forenza
Jan 31, 2011 | 2005 Suzuki Forenza
May 11, 2010 | 2006 Suzuki Forenza
Jul 25, 2009 | Suzuki Forenza Cars & Trucks
189 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: