Question about Jeep Cars & Trucks

Open Question

Yellow flash part time in jeep 1995 - Jeep Cars & Trucks

Posted by on

  • windsorguzzi Dec 28, 2013

    Hi aly radwan, I want to help you with your problem, but I need more information from you. Is the yellow flash in the front or the back of the car? Can you please add details in the comment box?



Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you reset the security alarm in the body control module? My 1995 Jeep sat for almost 3 months. I replaced the steering column, the starter, and the fuel pump. Now it starts, and then kills.

does it have the skim options
the 1993 alarm is not SKIM like on 1999+
it has no skim so can not cut fuel like 1999 can.
but the ASD will drop for 7 other ways.
wow 1995 jeep but what jeep?, no model stated, really?
wrangler , Grand, Cherokee, or reg. Cherokee.?
USA car, not the EXPORT>?
that error is real. it says they can NOT Communicate.
the scan tool will not scan?
or did the scan tool scan then report other errors.
like PCM comm errors. or? is that the tool is dead.
or the PCM will not talk to you.
or is the PCM reporting that it can not comm. to other things?

please be clear. i cant guess what you really saw.
if the scan tool fails that means. (dead scans...?)
the 1995 is not obd2, it's obd1, so your tool is wrong tool.!!!
the 3160 is OBD2 only and only works on all 1996+ cars and light USA. ONLY.

the 3140 is the only tool for DIY, that works. 93-95 jeeps.
besides flash codes. (key on/off trick) do that yet?

no starts are mostly ASD relay drop outs. (and true in this case)
if the ASD drops while cranking, it is an ASD drop cause stall.
the ASD drops in about 3 seconds.
and is caused by up to 8 things, all reported by the working scan too. (and sometimes the keyon/off trick works)
but not the skim reasons, listed, yours dont have SKIM.
are all fuses good?

wild guess on car . model next....
the book free , is it a ZJ jeep? or what, no matter its there...

if fuses are good
do the flash code way.
Start with the ignition off. Within five seconds, switch the key on, off, on, off, on. ("On" is NOT "Start" and "Off" is NOT "Lock").
The "check engine" light will flash. (codes)
Count the flashes. Each code is a two digit code,for example,23 would be FLASH FLASH (pause) FLASH FLASH FLASH (long pause). It may flash out up to 9 codes.
The best tool for 93 to 1995 is the INNOVA 3140 tool for OBD1 (with adapters) Bang for the buck, best.

key in mind at all times, turning off the key does clear some errors you never what to miss. like dead spark....
the method has value but is not good in all cases like real scan tool, that can show errors cranking or running.. or stalling.

Jun 24, 2015 | Jeep Cars & Trucks

1 Answer

Where is the thermo time switch located in a 1995 Toyota 4runner?

1995 Jeep Wrangler Where is the thermo time switch located in a 1995 A jeep, 4-runnner???????

Oct 02, 2013 | 1995 Jeep Wrangler

1 Answer

Can codes be pulled from 95 jeep without a scanner

Yes. Turn the ignition switch to ON, do not engage the starter. Do this 3 times. On the third time leave the key in the ON position and start counting the number of times that the Check Engine Light flashes on and off. There will be a slightly longer pause when it is flashing out the next digit. Then go to and see what your code(s) mean.

Aug 25, 2012 | 1995 Jeep Grand Cherokee

3 Answers

How to permanently disarm alarm on 1995 Jeep Grand Cherokee Laredo

#1 solution for this is to " BUY A GM PRODUCT" & save your money on costly repairs of these chrysler & JEEP (amc) vehicles!

Apr 25, 2012 | 1995 Jeep Grand Cherokee

1 Answer

95 Jeep Cherokee OBD1 flashes five times, What does that code mean?

It's flashing out 55 which is the code for end of code cycle, so no other codes are showing up, which is good.

Feb 06, 2011 | 1995 Jeep Cherokee

1 Answer

Engine code

12 and 55. The 55 means end of code session, the 12 means no distributor reference. Both of these codes are normal with the engine not running, so do not go out and purchase a dstributor. Is there another problem with the vehicle, or did you just want to know the codes? Comment back to continue,thanks.

May 26, 2010 | 1995 Jeep Grand Cherokee

1 Answer

The turn signal will not work right or left

try looking at fuse #8 (20Amp yellow fuse) and see if it is bad. that could be your problem, and make sure the fuse #4 is good as well. (15amp light blue fuse)

May 04, 2010 | 1995 Jeep Cherokee

1 Answer

Check engine on jeep grand cherokke 1995

Try again and verify, for example.
3 flashes,pause,then 3 more, is 33. etc.
5 flashes, pause 5 more, is code 55.(end of message)
always 2 digit number, then slightly longer pause in between those 2 digits.

Feb 23, 2010 | 1995 Jeep Grand Cherokee

2 Answers

How to disarm alarm system. I lost the alarm key pack. When I use the spare key to crack up the interior lights flashes. I am unable to turn them off. Then that runs the battery down.


Nov 30, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Security light flashing wont let you start jeep

the alarm seems to be activated. press the button and turn the key.

Aug 12, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides