Question about Cars & Trucks

Open Question

Kenworth abs fault code j1939 - Cars & Trucks

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What causes ABS light to stay on continuously

You will need to get the fault codes read as the fault can be any of the following
abs sensor fault
wiring fault to any of the sensors
abs ring lost teeth or read fault
abs controller self test fault
abs pump fault
brake line not holding pressure slight leak

Feb 01, 2017 | Cars & Trucks

1 Answer

Have a 2012 kenworth with a paccar mx-13 and it has an active fault sayin EGR DELTA PRESSURE.what is this?and how do i fix it?

Hi I had the same problem with my 2012 Kenworth t660 with a paccar mx 13 engine...
What u need to do is replaced the EGR delta pressure sensor , i bought mine for 170

Dec 03, 2015 | Cars & Trucks

1 Answer

Check engine light on 1997 t600 kenworth

firstly , you take it to a kenworth service center as the light can be engine or transmission and it is serious
next we have no idea as to what engine you are running so any answer is pointless
next you have to run the fault codes before a code can be explained as to what to do

Nov 19, 2015 | Cars & Trucks

1 Answer

How do I fix what ever is wrong the code is J1939 datalink saying I am low on DEF but the tank is full also have 2 engine lights on and beeping there's a message saying engine percent torque

[PDF]FAULT CODE 426 SAE J1939 Data Link Communication
Oct 11, 2009 - Electrical problems with the SAE J1939 data link wiring such as grounded, shorted, or open circuits. FAULT CODE 426. SAE J1939 Data Link ...

Sep 08, 2015 | Cars & Trucks

1 Answer

What does codes 54 and 55 mean on my 2001 freightliner columbia 60 series detroit

code 54 (DDC#( flashed ) refers to vehicle speed sensor fault
code 55 (DDC# flashed)refers to other ECU fault ( this fault is logged in conjunction with another fault to indicate missing information from another ECU. it also refers to J1939 data link fault

May 19, 2015 | Cars & Trucks

1 Answer

How do I obtain a list of the ABS fault codes/ definition and diagnostic procedures

Try this: But there is not a lot of information on brake systems because of the liability and royalties that are involved.

Feb 25, 2015 | Cars & Trucks

1 Answer

What does it mean if a fuel Rail pressure code comes on in a 2013 kenworth t660

a code usually means there is a fault with that component and should be checked out by a qualified technician, sounds obvious i know but hard to be more accurate on a forum , is there a noticable loss of performance or greater furl use ?

Feb 23, 2015 | Cars & Trucks

1 Answer

Fiesta duratec 2005 Abs warning light on

Whenever the ABS module turns on the ABS light in the dash it is to alert you to the fact that a fault has occurred in the ABS system and the control module has turned off the ABS brake control, you now have regular non ABS brakes. The waring light will stay on until the fault is corrected. Since a large number of problems would cause this you must get the control module scanned to retrieve the fault code that was set in the control modules memory when it turned on the light. Once the fault code is known the process of diagnosis and repair can begin.

Feb 10, 2012 | 2005 Ford Fiesta 1.6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides