Question about Cars & Trucks
Sounds normal, dampy spark plug wires. drive it a long time and hope the water dissapears. Washing the engine with a high-pressure hose is n ever a good idea.
Posted on Jan 28, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: bmw 316 ABS light stays on
Your ABS systems use a combination of electronic and hydraulic systems to modulate the brakes individually to prevent them from locking up. Antilock systems consist of wheel speed sensors, a hydraulic control unit (HCU), and an electronic control unit (ECU). Because of how complex the system is your computer does a self-test. If the check is successful, the ANTILOCK and BRAKE lights will go out within a few seconds. If one or more of the component of the ABS system fails to pass one or both lights will remain lit, the system will shut down and set a code. The code itself does not tell exactly what component is defective - it only indicates where to look, or what parameter is out of normal range. You or a technician will have to perform further testing to pinpoint cause and the proper repair. Even if you reset the light, if the underlying problem is not addressed it will come back on.
Please let me know if this information is helpful. Positive feedback is appreciated. Thank You!
Posted on Apr 02, 2009
SOURCE: ive got an bmw 316 compact
High possibility the maf sensor needs dervicing or replace. you can clea it yourself with electrical spray cleaner CRC brand. It is located inside the intake duct in a metal section. Do not brush or rub to clean. Use the spray to thoroughly wash off the sensor, It is sensitive and expensive to replace so be nice to it.
The spray will dry fast so don't use compressed air and don't physically touch the unit. Good Luck, Ned
Posted on Oct 04, 2009
your going to have to clean it down good with some engine cleaner, then run engine, try to pin down leak. may have a bad oil preasure switch thats leaking, or oil filter, or a gasket; hope this helps good luck.
Posted on Oct 15, 2009
Testimonial: "Great, thanks"
SOURCE: i have a bmw 316
might be drain plug washer or could be a leak from higher up the engine. get it cleaned off using some gunk remover and low pressure hose then watch for easier indication of actual leak.
Posted on Oct 16, 2009
good day, you may have problem on your valve cover gasket, you may need to buy a new one for you to prolonged the engine life. hope this helps, have a nice day
Posted on Feb 07, 2010
Tips for a great answer:
Oct 18, 2014 | 1989 BMW 316
Dec 28, 2013 | Cars & Trucks
Jun 27, 2011 | BMW 3 Series Cars & Trucks
Mar 13, 2011 | BMW 318 Cars & Trucks
Feb 07, 2010 | 2002 BMW 3 Series
Nov 01, 2009 | 2000 BMW 3 Series
Oct 15, 2009 | 1999 BMW 318 ti
Oct 01, 2009 | 1997 BMW 318
Mar 18, 2009 | 1997 BMW 318
Nov 18, 2017 | Dodge Cars & Trucks
18 people viewed this question
Usually answered in minutes!