Question about Mitsubishi Galant

Open Question

2000 galant, key won't turn off, stays in ACC mode. If i turn it clockwise, it will turn off, but won't come out. Now the engine won't even fire, it just turns over.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 599 Answers

SOURCE: Key wont turn in ignition 2006 Corolla S

have tilt wheel? try unlocking tilt and moving it as you try to turn key..replace key and/or ignition switch if that doesnt work..if it does ..the linkage is damaged in steering column to switch at base

Posted on Dec 08, 2008

  • 107 Answers

SOURCE: 2000 Lincoln Towncar will not stay running

sounds like very dirty throttle body and /or defective idle air control valve

Posted on Feb 19, 2009

  • 94 Answers

SOURCE: acc mode on ignition switch

yes it should turn backwards and the alt light should be on without the truck running and the key turned forward or in the acc position

Posted on Mar 10, 2009

  • 18 Answers

SOURCE: 2000 Galant 3.0 V6 won't idle when warm

that weired they normaly die when the air con turnes on ummmmmmmmmmmmmm check the air filter

Posted on May 22, 2009

  • 1 Answer

SOURCE: seems like the car is staying in "ACC" (accesory key position)

the ignition lock cylider gets jammed try messing with the shifter my alero has done the same thing to me. the ignition cylinders on these the grand-ams and about five other gm cars with the dash mounted ignition are very ****-poor and a new switch at the dealer is 175.00 and you have to have it fitted to your key as the new one comes without a key

Posted on Jul 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 jeep cjerokee lorado How do reset my jeep to turn off the anti theft mode so I can get my jeep engine to stay started


Roll the key ford to acc not started just forward so radio comes onand leave this way for 5 min til security light goes away turn off atempt to start. May die instantly. Just turn off again and restart. Works for my camaro. Or turn key to acc. Then back to off and repeat. This step usually 25 -50 times and it may resrt system. Youll hear a bit off clicking if it works.

Apr 09, 2016 | Jeep Cars & Trucks

1 Answer

2000 olds 3.5 Dohc. Changed fuel filter checked fuel pressure @40 lbs resting cranking 45 lbs When i try and start it in the morning indoors won't fire crank the key to acc then on then back to acc then...


Which is the problem, no fire, or no crank. No fire means to spark to engine, but engine turns over fine. No crank means engine won't turn over when key is turned. I'm assuming engine will not turn over. Three most common problems. 1. Weak battery (get tested at auto parts store). Will hold charge for short time once started, but loses it when sits overnight. 2. Bad starter. Possible but not likely, still not out of the question. 3. Bad battery cables. This is an easy test. Take a pair of jumper cables and bypass the battery cables by connecting black side of jumper cable to "-" of battery and block of engine, and red of jumper cables to "+" of battery and (tap) Battery terminal post on starter...engine should turn over. Ensure you take all safety precautions to prevent car from moving during this procedure. Best of luck resolving this problem.

Dec 06, 2013 | Cars & Trucks

1 Answer

How to change headlight on 2000 galant


  • 1
    Place the Mitsubishi on a flat service in park. Set the parking brake before continuing.

  • 2Open the Galant's hood and locate the headlight cover -- roughly 3-inch wide circular piece of plastic -- behind the headlight bulb intended for replacement. Turn this cover clockwise to unlock it and pull it from the headlight assembly, exposing the headlight socket below it.


    3

    Hold the rear of the headlight socket and turn it counterclockwise to unlock it. Pull the headlight socket and bulb from the headlight assembly.


    4

    Grab the bulb and pull it from the socket with a slight wiggling motion.


    5

    Pick up the new 9003 headlight bulb using a clean, lint-free cloth and line up its prong with the slots in the socket. Never tough the bulb with your bare hands, as the oils left by your hands can cause the bulb to burn out prematurely.


    6

    Slide the socket and new bulb into the headlight assembly and turn the socket clockwise to lock it into place.


    7

    Place the plastic cover behind the bulb and turn it counterclockwise to lock it into place.


    8

    Repeat Steps 1 through 7 for the headlight bulb on the other side of the Galant, if needed.


    9Close the Galant's hood.


    Read more: How to Put in a Headlight Bulb on a 2000 Mitsubishi Galant ' eHow.com http://www.ehow.com/how_8210819_put-bulb-2000-mitsubishi-galant.html#ixzz27iQwCdOe

    Sep 27, 2012 | 2000 Mitsubishi Galant

    1 Answer

    Have a 2000 GMC Yukon Denali. Won't fire.


    Make sure that the belt isn't extremely tight and they the belt tensioner isn't liked up by pulling in the belt. It should move and spring right back. Make sure engine isn't locked up. And please explain what happen with the vehicle. The fact that you replace plugs and wires and fuel filter for a car that's not turning is throwing me off. So right now we are going all over the place. But definite look at belt and tensioner I've seen a few times that a bad tensioner will make the belt wrap around tighter inhibiting the engine from turning.

    Jun 26, 2012 | GMC Yukon Denali Cars & Trucks

    1 Answer

    My 2000 galant wont start since battery went dead. just gives me a clicking sound when i turn the key to accesory


    replace battery then start vehicle, make sure the light in the trunk is not staying on killing the battery.

    good luck

    Dec 02, 2009 | 2000 Mitsubishi Galant

    2 Answers

    2000 Mitsubishi Galant won't crank


    Start with the old addage, "Give it fuel, Give it fire, and you will get what you desire." Check your fuel rail under the hood, it should have a valve almost like where you add air to a tire. Press the pin, fuel should shoot out of there. If not, its a fuel problem then you just trace it back down the line. Could be a fuel filter? Next, check your spark. See if your getting any to the plugs, if no, start tracing it back. Also, you didn't say if you recently replaced plugs and wires. If there are plug wires, which there should be, make sure they are connected to the right plug. If not your firing order won't be even close, so thats a no start. Check your fuel injection relay under the hood if you have one. Make sure it is working. This relay gives the fuel injectors their power. Basically, check anything that you need to make an engine run but start with the most basic first. Could be a bad MAF Sensor too. Also, don't rule out something crazy like a Crankshaft position sensor. There are ways to back probe all the sensors with a test light just look around online and find out what sensors you have and how to test them.

    Nov 24, 2009 | 2000 Mitsubishi Galant

    2 Answers

    Firing order 1999 mitsubishi diamonte need diagram


    The firing order is 1-2-3-4-5-6

    The rotor spins counter clockwise and bottom of the distributor cap is the number one spark plug lead.

    For more details, you can check the information about Mitsubishi Galant/Mirage/Diamante 1990-2000 FIRING ORDERS in Autozone.com (free register).

    Hope this helps.

    Sep 08, 2009 | 1999 Mitsubishi Diamante

    2 Answers

    Acc mode on ignition switch


    Hello, no you should not be able to turn it back and yes in accessory position it will have the alternator light comming on without engine running. Please rate this answer, thank you.

    Mar 10, 2009 | 2005 GMC Sierra Denali

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    13 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mitsubishi Experts

    yadayada
    yadayada

    Level 3 Expert

    75066 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7754 Answers

    Are you a Mitsubishi Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...