Question about Cars & Trucks
Check bulbs are OK, Break light switch is located, at the top of the brake pedal. Look at the top of the brake pedal for the switch. It has two wires connected, test for a live on one of the wires (with ignition on, no live check fuses) bridge the wires should switch the lights on, replace switch. If light don't come on, check for volts at the bulb holders (wiring fault)
Posted on Dec 28, 2013
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need to take the jeep to a dealer or a good mechanic who can retreive the codes out of the computer. You may have a module problem but I will not guess without knowing the codes.
Posted on Feb 11, 2009
brake pedal switch, get a wire, unplug plug, bridge circuit and check lights.
plug and switch is high up on the brake pedal not normally easy to get to.
Posted on Aug 15, 2009
Tips for a great answer:
Apr 05, 2015 | 2006 Jeep Liberty
Sep 13, 2014 | 2006 Jeep Liberty Sport
Aug 09, 2014 | 2006 Jeep Liberty
May 30, 2010 | 2006 Jeep Liberty
Jan 28, 2010 | 2006 Jeep Liberty
Dec 30, 2009 | 2005 Jeep Liberty
Apr 25, 2009 | 2006 Jeep Liberty
Feb 11, 2009 | 2006 Jeep Liberty
127 people viewed this question
Usually answered in minutes!