Question about Ford Focus

Open Question

Focus 2006 windshield washer pump - Focus Ford Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: how do you access the windshield washer pump on

The washer pump is located on the bottom of the wash fluid bootle. you can access it by removing the front passanger fender liner..

Posted on Jan 12, 2010

Ad
  • 85 Answers

SOURCE: windshield washer on 2006 gmc envoy slt stopped

you have to remove the air filter box to get to the washer fluid resivoir the pump is mouted to it

Posted on Feb 24, 2010

  • 437 Answers

SOURCE: how do I access the windshield washer pump on a

it's attached to the resevoir.

Posted on Jul 31, 2010

tgv1501
  • 870 Answers

SOURCE: windshield washer pump fpr a

Every electronic device has a fuse,So try to check for any burnt ones. Good luck

Posted on Dec 18, 2010

  • 1168 Answers

SOURCE: where is the fuse for windshield washer pump on

Hello bback.
If your wipers are working the problem is not the fuse as it is powered by the same fuse as the wipers.
It is fuse #F56 20AMP in the central junction box.
Usually the problem is a bad washer pump.
If you require further advise on this, ask me here, be glad to help.

Thank you for using FixYa.

KL

Posted on Jan 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace the windshield washer pump on 2008 ford focus, wipers work but no spray comes out


The hose could be clogged ! Do you know where you add the washer fluid ? Somewhere on the bottom of that plastic bottle is the washer pump .
Removal and Installation
> WARNING: Windshield washer solution contains methanol, which is poisonous. Observe all cautions and warnings indicated on label of washer solution container. Failure to follow these instructions may result in personal injury.
> CAUTION: When replacing the windshield washer pump be careful not to damage the rubber grommet.
> CAUTION: Do not operate the windshield washer pump before filling the reservoir. Failure to do so could result in premature pump failure.
  1. NOTE: When installing the reservoir, the filler neck must be lubricated using a water-based lubricant.
    Remove the bolt and the windshield washer reservoir filler neck.
  1. Remove the RH fender splash shield. For additional information, refer to Section 501-02 .
  1. Remove the foam filler and remove the retainer.
  1. Remove the 2 screws and the accessory drive splash shield.
    • To install, tighten to 5 Nm (44 lb-in).
  1. Remove the nut, 2 bolts and position the A/C accumulator aside.
    • To install, tighten to 9 Nm (80 lb-in).
  1. Unclip the A/C lines from the inner fender well.
  1. Drill out the rivet and remove the bracket.
  1. Remove the 2 bolts, slide the windshield washer reservoir assembly forward to release it, and position the washer reservoir aside.
    • Install the upper bolt followed by the lower bolt, and tighten to 5 Nm (44 lb-in).
  1. Disconnect the windshield washer tube assembly from the pump and release the windshield washer tube assembly from the washer reservoir.
  1. Disconnect the electrical connector from the windshield washer pump.
  1. Release the wiring harness from the reservoir, and remove the washer reservoir.
  1. To install, reverse the removal procedure.

Apr 07, 2015 | Ford Cars & Trucks

2 Answers

My windshield washer is not working correctly.


Assuming you have washer fluid and you can hear the pump with no flow at the main line I would guess the turbine has separated from the pump shaft.

Sep 30, 2014 | 2006 Ford Focus

1 Answer

What fuse works the windshield washer pump on a 2006 mustang


No they use the same fuse. The pump motors do go out. they are easy to change

Jan 04, 2012 | 2006 Ford Mustang

2 Answers

My windshield washer pump isn't working on my 2006 Dodge Durango. I want to know which fuse to check for my windshield washer pump.


More than likely it's the pump itself. I say this because in a nutshell your pump is computer controled. It receives power through the CAN system on your vehicle. If it were just a fuse MANY other things would not be working. I would see if you are geting power and ground to the pump. If you are then replace the pump. If you are not you may be looking at the switch or a wiring problem or in the system itself. Wish I could give you just a fuse but it's not that simple on your vehicle. I gave you a descrition of how it works but it can be a little confusing.

12_10_2011_11_09_06_pm.jpg

Dec 10, 2011 | Cars & Trucks

1 Answer

My windshield washer switch doesn't work on my 2006 Ford Focus.


Check for the fuse in the box if is blowed replace it if it is not this check your water reservoir under the hood if it is low fill it up.

Dec 17, 2010 | 2006 Ford Focus

1 Answer

Windshield washer fluid barely sprays then quits. Does not spran on rear window at all. Good fuse and can hear motor running. 2006 kia sorento


windshield washer hose could have a hole somewhere have some one run washer pump while you check under hood for leaks if you cant find any then its safe to assume that pump is worn out still turns but the pump suction is worn out, must be replaced.

Jan 14, 2010 | 2006 Kia Sorento

1 Answer

Wash wipe on a Focus 2000 model


I blieve it's the same pump taht runs the rear and front washers.

The windshield washer comprises the following parts:
  • Windshield washer reservoir, below the front left-hand fender
  • Washer pump, on the outside of the washer reservoir
  • Two washer nozzles on the hood/bonnet, adjustable.
---------------------------------------------------------
Windshield Washer Pump and Reservoir Removal
All vehicles
  1. Remove the windshield washer reservoir filler neck.
  1. Raise and support the vehicle. For additional information, refer to Section 100-02 .
  1. Remove the right-hand fender splash shield (wheel shown removed for clarity).
  1. Remove the washer reservoir.
    • Disconnect the electrical connectors.
    • Pull off the hoses.
  1. Remove the windshield washer pump with rubber gasket (shown with reservoir installed).
    1. Disconnect the electrical connector.
    1. Disconnect the hoses.
    1. Lift out the pump.

Feb 27, 2009 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...