Question about 2002 Buick LeSabre
See if coolant level is low (air in cooling system)
have codes pulled for acm/bcm could be acuator motor issue
Posted on Dec 29, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The heater core is located under the dash, in the center. The container holding the core looks like a black plastic box. Remove the ash tray for easier access. You may have to also remove some other covers under the dash. You must first drain the radiator then you have to disconnect the hoses. There are two hoses connected to nipples of the heater core that go thru the center of the firewall. Remove the screws that hold on the cover to the heater core. Then you should be able to get the old one out. There might be a couple of other minor steps but I'm sure you can figure them out. For re-installation just go in reverse order to put it all back together.
Posted on May 25, 2009
Sounds like you just need to replace the one or two 02 sensors on bank 1.If you have over 100,000 miles the 02 sensos are realy to be replaced just as spark plugs and air filteres. If you wait to long to replace them you take a chance of them not comming out and then when they do go bad you will need to replace the exhaust as well.Hope this helps and good luck.
Posted on May 16, 2010
Tips for a great answer:
Jul 01, 2014 | 2002 Buick LeSabre
Oct 25, 2013 | 2004 Buick LeSabre
Oct 25, 2013 | 2002 Buick LeSabre
Sep 21, 2012 | 2002 Buick LeSabre
Jan 09, 2010 | 2002 Buick LeSabre
Nov 01, 2009 | 2002 Buick LeSabre
Sep 15, 2009 | 2002 Buick LeSabre
Mar 15, 2009 | 2000 Buick LeSabre
90 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: