Question about Mazda Millenia
Changed the timing belt on a 1999 Mazda Millenia. Now car acts like it is getting too much fuel. Won't start but will turn over. Replaced a sensor and spark plugs. Still nothing. No codes are found either.
Sounds like you have done it wrong and crunched the valves ,did you turn engine over by hand after fitting the new belt before attempting to start the engine
Posted on Dec 27, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
check timing belt timing on the cam gear and crank gear. if timing belt has 60000 miles or more. if they dont break first. they stretch enough jump out of time.
Posted on Apr 09, 2009
SOURCE: Mazda mx3 wont start
VSS or vehicle speed sensor aka cam sensor or crank position sensor. Test the battery and alternator. You should also check for blown fuses, bad wires and grounds on a car as old as yours. If you find it's getting spark and fuel after further testing, check the timing belt. It could have slipped or broke even if it was changed recently so either pull off the cover or at least do a compression test.
Posted on Apr 16, 2009
Tips for a great answer:
Apr 26, 2013 | 2000 Mazda Millenia
Jul 14, 2012 | 1999 Mazda Millenia
Jan 07, 2011 | 1998 Mazda Millenia
Nov 24, 2010 | 2002 Mazda Millenia
Feb 14, 2009 | 1999 Mazda Millenia
Jul 20, 2008 | 2000 Mazda Millenia
104 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: