Question about 2007 Dodge Dakota Cab SLT

Open Question

2009 jeep liberty door lock actuator - 2007 Dodge Dakota Cab SLT

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Luz marcada con el numero cinco?


2003 Jeep Liberty- Reading Engine / Diagnostic Codes ...

? 1:13
https://www.youtube.com/watch?v=pGrPBBzp7wE
Jan 6, 2013 - Uploaded by DeathScouter
2003 Jeep Liberty- Reading Engine / Diagnostic Codes ..... error code will flash 2 times, brief pause, flash 1 time, pause, flash 5times, pause, ...

2005 Jeep Liberty possible cause of P0442 error. - YouTube

? 5:26
https://www.youtube.com/watch?v=2ba-gH0gadg
Dec 21, 2014 - Uploaded by TheBGravit
While replacing a bad fuel pump I believe I found the cause of a P0442 Error code. I was able to repair the ...

Jeep Liberty Questions - Cylinder Misfire code - CarGurus

www.cargurus.com > Questions > Jeep > Liberty

CarGurusMay 27, 2009 - My jeep Liberty 2009 does the same the Dashboard showed a code of cylinder .... i have a jeep liberty 2006 with the # 5 cylinder misfire. i replaced the sparks... I have a 2005 Jeep Liberty 6 cylinder, engine light came on scaned the ... 2002 jeep liberty camshaft posistion sensor error code p0340 5 answers.

Check Engine Light/Misfire Due to Intake Valve Locks ...

repairpal.com > Problems > Jeep > Liberty
Recently got a second hand 2005 Jeep Liberty Sport. Everything worked fine ... #5intake valve seat dropped and held open the intake valve. 2008 Jeep Liberty.

OBD-II Trouble Code: P0305 Cylinder 5 Five Misfire Detected

www.obd-codes.com/p0305


Dec 08, 2015 | 2005 Jeep Liberty

1 Answer

Cannot access door latch assembly 2009 JEEP LIBERTY


all this is covered in the FSM. step by step. under body or doors.
2nd best is alldata.com
what door? you never said and steps can very by body options.
name the door,
i guess the latch is bad?
here are the words, for door lock motor.
lots of steps. my wild guess , it the door cover is off.
and the plastic film removed
and you get stuck here,
  1. Remove the tape covering the access hole on the carrier plate and discard. Access the window regulator liftplate through the hole in the carrier plate.
  2. Push down the door glass (1) and use a slotted screwdriver to release the tab on the window regulator liftplate (2). Lift the glass up and secure to the header.
  3. Remove the three screws (2) securing the door latch to the door shut face.
  4. Remove the one screw (1) attaching the latch bracket to the door shut face.
  5. Disconnect and remove the electrical connector (1) from the door (4).
  6. Remove the 10 screws (3) from the carrier plate (2).
  7. Disconnect the outside mirror electrical connector.
  8. Remove the carrier plate (2) from the door (4). end

once carrier is out there is chapter on that , disassebly

really, buy the FSM
or log in to alldata.com
and avoid making wrong moves, or getting hurt.

Apr 02, 2014 | 2009 Jeep Liberty

1 Answer

Some of my doors will lock and unloc by remote and som will not how do I fix this


do they work when using the master switch on the drivers door panel? if only the drivers door unlocks when pressing the button, it may be a personal setting change needed. in this case usually pushing the unlock button on the remote twice will then unlock all doors. if there is only one lock that doesn't work it is most likely the door lock actuator that is at fault or a broken wire in the door opening wiring harness of the door that the lock does not work on.

Mar 22, 2014 | 2010 Jeep Liberty

1 Answer

My 2009 Jeep Liberty will turn on but the instrument panel will not?


sounds like lock cylinder is shot
but google jeep liberty forums and post there

Feb 02, 2013 | 2009 Jeep Liberty

1 Answer

Door locks don't work on 2008 jeep liberty


Probably a bad actuator in one of the doors.

Jun 26, 2012 | 2008 Jeep Liberty

1 Answer

The rear lift glass/hatch does not work in my 2006 Jeep Liberty. I replaced the battery and ever since then, the rear hatch release has not worked. The glass was up when battery was replaced. All the...


test the lead to the lock actuator see if u get voltage (u will have to chase wire back to fuse box to find short) , if u get voltage then the lock has gone bad or is binding on something.

Mar 20, 2011 | 2006 Jeep Liberty

2 Answers

I have a 2002 Jeep Liberty Limited, 3.7 L motor. The heater will not blow hot air. The A/C and fan work well. When I turn the temperature dial to hot, there is only cold air coming out. Can you assist me?


Jeeps are notorious for having broken temperature control (Blend Air) doors. A malfunctioning Blend Air Door actuator probably caused it to break. The dash will have to be removed to replacethe door and the door actuator.

Jan 16, 2011 | 2002 Jeep Liberty

1 Answer

2004 jeep liberty electrical problems maybe


you have a short somewhere in the cigarette lighter. Most likely the socket itself, but possibly behind the dash somewhere. The radios in the Jeeps ****, and most likely just a bad radio. The door lock either has a bad actuator, or bad wiring in the door jamb. Remove the panel and see if you are getting power to the actuator. If so, you need it, if not check the wiring.

Aug 13, 2009 | 2004 Jeep Liberty

Not finding what you are looking for?
2007 Dodge Dakota Cab SLT Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...