Question about 2005 Volkswagen Jetta

1 Answer

2005 5 cylinder 2.5 L jetta power steering locked

The steering is locked i believe it needs the electric power steering motor assembly, need help finding the right part

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 239 Answers

CALL DEALER WITH VIN # SEE IF YOU CAN GET PART #
THEN YOU CAN SEARCH FOR REMAN OR NEW PART

Posted on Dec 28, 2013

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
carsandcomps
  • 722 Answers

SOURCE: 2005 jetta no power steering hard to steer

First and foremost, (if not already done) check the powersteering resevoir to make sure it has fluid and it is full as well as having no leaks. If it's leaking you may see small dark areas where you frequently park, on the ground. If it is full, there is a chance you need a new one, a hose/line is broken or has a hole (leak). A mechanic is your best choice to find this out. If the resevoir is empty or low, (can be checked hot or cold; look for level indicators for each on dipstick); fill it up and drive for a day or two - check the fluid again (make note of any difference in steering after filling. Powersteering pump may also be belt driven, so make sure the belt is tight (no cracks, etc.) may need to replace belt.

Posted on Mar 31, 2009

thnpit
  • 1 Answer

SOURCE: 2005 jetta power steering amber warning light, trouble ?

If you do not know what you are talking about you really should stay out of a conversation. It dose not have a power steering pump or a reservoir or suction! It is electronic and needs scanned with a computer. God people open mouth and insert huge foot. Stay with your night time job your dam sure no mechanic!

Posted on Sep 10, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to put steering wheel fluid for my 05 chevy equinox don't know where to put it in. Can someone please help me?...


2005-2009 models used electric power steering assist exclusively. There is mo power steering pump, reservoir, or fluid on these models. Instead they use an electric motor mounted to the steering column to provide steering assist 2010 models still use the electric power steering on the four cylinder models but also use a conventional hydraulic power steering on the v-6 models. If you have no power steering assist check the 60 amp main fuse for the power steering in the under hood fuse block if that is o.k. You will need a scan tool to find out what is wrong with the system. It is not uncommon for the electric motors to fail or for the fuse to blow while jump starting the vehicle.

May 30, 2011 | 2005 Chevrolet Equinox

2 Answers

The car will turn over but won`t start but if I turn the key on and jump the starter it starts


Sounds like the ignition switch has gone kaput. The ignition switch come in two pieces, an electrical switch and a mechanical switch.

The switch electrical portion can be replaced separatly from the mechanical portion (tumbler that the key engages). It is not a real difficult repair but requires some mechanical knowlege of how the column is assembled.

This can be verified with electrical test equipment prior to buying a new electrical switch.

Apr 18, 2011 | 1994 Volkswagen Golf

1 Answer

Remove ignition lock to switch link 1995 suburban


The ignition lock assembly contains two components: a lock cylinder to deter theft and an electrical portion that supplies power to electrical components such as the radio, electric windows, and windshield wipers. The electrical portion of the ignition switch also provides power to the starter motor to start the engine.
The ignition lock is an anti-theft device that prevents a vehicle from being driven unless the ignition key is in the ignition switch. If the ignition key is not in the ignition switch, it 's impossible to turn the steering wheel.
To replace the ignition switch cylinder lock, the trim panels around the steering wheel are removed. Then the tamper-proof hardware that attaches the ignition lock assembly to the steering column is removed. The ignition lock assembly is removed from the steering column, and the lock cylinder is replaced. The new ignition lock is reattached to the steering column, and the trim panels are replaced.make sure you dissconect battery first the 1997 had a recall on the ignition switch dont no if the 1995 had a recall if so they will replace for free

Dec 08, 2010 | 1995 GMC Suburban

1 Answer

2005 jetta power steering amber warning light, trouble ?


If you do not know what you are talking about you really should stay out of a conversation. It dose not have a power steering pump or a reservoir or suction! It is electronic and needs scanned with a computer. God people open mouth and insert huge foot. Stay with your night time job your dam sure no mechanic!

Jul 13, 2010 | 2005 Volkswagen Jetta

1 Answer

Steering wheel covers


I hope this helps....these are the steps to removing and replacing the cylinder:

  1. Remove the knee bolster.
  2. Remove the steering column trim covers from the steering column.
  3. Disconnect the steering column electrical connectors.
  4. Remove the wire harness assembly from the steering column and the wire harness strap.
  5. Slide the 2 connectors of the turn signal and multifunction switch assembly out of the bulkhead connector.
  6. Remove the key alarm connector from the lock module assembly in the following way:
  7. Rotate the key alarm connector 90 degrees.
  8. Pull the key alarm connector out of the lock module assembly.
  9. Remove the passkey connector from the lock module assembly.
  10. Remove the connector from the electric park lock, for vehicles equipped with floor shifters.
  11. Remove the ignition switch from the lock module using tool J42759 or equivalent.
To install:
  1. Install the ignition switch to the lock module
  2. Install the key alarm connector into the lock module assembly.
  3. Push the key alarm connector into the lock module assembly.
  4. Rotate the key alarm connector 90 degrees so that the key alarm connector locks into place.
  5. Install the passkey connector into the lock module assembly.
  6. Install the connector to the electric park lock, for vehicles equipped with floor shifters.
  7. Slide the 2 connectors of the turn signal and multifunction switch into the bulkhead connector.
  8. Attach the wire harness assembly to the steering column wire harness strap.
  9. Connect the steering column electrical connectors to the vehicle.
  10. Install the trim covers to the column.
  11. Install the knee bolster.
  12. Enable the SIR system.
  13. It may be necessary to reprogram the theft deterrent system if the module was replaced.

Mar 06, 2010 | 2001 Chevrolet Suburban

1 Answer

Where is a power steering pump located on a 4 cylinder chevy cobalt ls


Your Cobalt is not equiooed with a Power Steering Pump. It has electric power steering. See the description below.

Power Steering - System Description and Operation
The electric power steering (EPS) system reduces the amount of effort needed to steer the vehicle. The system uses the body control module (BCM), power steering control module (PSCM), torque sensor, discrete battery voltage supply circuit, EPS motor, serial data bus, and the instrument panel cluster (IPC) message center to perform the system functions. The PSCM, torque sensor, not the EPS motor are serviced separately from each other or from the steering column. Any EPS components diagnosed to be malfunctioning requires replacement of the steering column assembly, also known as the EPS assembly.

Nov 20, 2009 | 2005 Chevrolet Cobalt

1 Answer

Where is a power steering pump located on a 4 cylinder in a 2005


Your Cobalt is not equipped with a Power Steering Pump. It is equipped with electric power steering. See the description below.


Power Steering - System Description and Operation
The electric power steering (EPS) system reduces the amount of effort needed to steer the vehicle. The system uses the body control module (BCM), power steering control module (PSCM), torque sensor, discrete battery voltage supply circuit, EPS motor, serial data bus, and the instrument panel cluster (IPC) message center to perform the system functions. The PSCM, torque sensor, not the EPS motor are serviced separately from each other or from the steering column. Any EPS components diagnosed to be malfunctioning requires replacement of the steering column assembly, also known as the EPS assembly.

Nov 20, 2009 | 2005 Chevrolet Cobalt

1 Answer

Install a Ignition lock cylinder 1997 Pontiac Grand Am


  • Ignition Removal Instructions
  • Disconnect the negative battery cable from the battery. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";}
  • Remove the upper and lower shrouds. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle or Steering Column Trim Covers - Disassemble - Off Vehicle .
  • Put the key in the steering column lock cylinder set (1).

  • Turn the key to the "START" position.
  • Install a 1/16 allen wrench (2) into the hole on top of the lock module assembly in order to release the steering column lock cylinderset retaining pin.
  • Turn the steering column lock cylinder set (1) into the "RUN" position.
  • Pull the steering column lock cylinder set (1) out from the lock module assembly.
  • Remove the key from the steering column lock cylinder set (1).

19eb1ff.png


  • Installation Instructions
Normal 0 MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";}
  • Insert the key into the steering column lock cylinder set (1).
  • LIne up the locking tab (2) and the positioning tab (3) of the steering column lock cylinder set with the locking tab slot (5) and the positioning tab slot (4) in the lock module assembly (6).
  • Push the steering column lock cylinder set (1) into the lock module assembly (6).
  • Rotate the steering column lock cylinder set (1) in the lock module assembly (6) into all positions.
  • Install the upper and lower shrouds. Refer to Steering Column Trim Covers - Assemble - Off Vehicle or Steering Column Trim Covers - Assemble - Off Vehicle
  • Remove the ignition key from the lock cylinder set (1).
  • Connect the negative battery cable to the battery. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical

d612a25.png

I hope this helps and good luck.
Please remember to vote 962e1fb.jpg and leave a testimonial. Thanks.

Nov 02, 2009 | 1997 Pontiac Grand Am

1 Answer

Ignition switch replacment


Ignition Switch REMOVAL & INSTALLATION The ignition switch is located at the bottom of the ignition key cylinder body. To remove the ignition switch, first remove the ignition lock cylinder.

1993–99 Golf and Jetta
  1. Disconnect the negative battery cable.
  2. Center the steering wheel.
  3. Remove the air bag.
  4. Remove the steering column switches.
  5. If the vehicle is equipped with an automatic transmission, detach the shift lock cable from the lock cylinder housing.
  6. Remove the adapter sleeve from the steering column.
  7. Remove the spring and horn contact ring from the steering column assembly.
  8. Detach the sheer bolt.
  9. Insert the ignition key and unlock the cylinder, then detach the wiring connectors.
  10. Once all wiring has been detached, slide the housing off the steering column.
  11. Mark and drill the lock cylinder as shown and described in the above procedure.
  12. Compress the stop spring and pull the lock cylinder out of the steering column housing.
  13. Put the new lock cylinder into the steering lock housing.
  14. Insert the key into the lock cylinder.
  15. While you gently turn the key, insert the lock cylinder fully into the housing.
  16. The rest of the installation procedure is the reverse of removal. NOTE: Always use a new shear pin when installing the lock cylinder.

Jun 25, 2009 | 1998 Volkswagen Jetta

2 Answers

2005 jetta no power steering hard to steer


First and foremost, (if not already done) check the powersteering resevoir to make sure it has fluid and it is full as well as having no leaks. If it's leaking you may see small dark areas where you frequently park, on the ground. If it is full, there is a chance you need a new one, a hose/line is broken or has a hole (leak). A mechanic is your best choice to find this out. If the resevoir is empty or low, (can be checked hot or cold; look for level indicators for each on dipstick); fill it up and drive for a day or two - check the fluid again (make note of any difference in steering after filling. Powersteering pump may also be belt driven, so make sure the belt is tight (no cracks, etc.) may need to replace belt.

Mar 31, 2009 | 2005 Volkswagen Jetta

Not finding what you are looking for?
2005 Volkswagen Jetta Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...