Question about 1996 Plymouth Voyager
Driver window donot operate
Check all fuses first then pull switch and test for power at window switch. If power getting to switch, test wires going to window motor. 2 wires to motor, and depending on what way switch is pushed determines which wire will have power. Switch just reverses polarity to raise and lower, so one or the other wire should show 12 volt DC power when switch pushed. If power going to motor, double check you have good ground as well, and if so, motor is shot. You can also double check motor by connecting wires from motor to a 12-14volt cordless drill battery.
Posted on Jan 31, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Aug 14, 2016 | 2007 Mazda 6 2.3
Passenger Door Module (PDM)
Body Control Module (BCM)
RR power window switch
Window up and window down relays in each of the rear passenger window switches
Window lockout switch
Reversible power window motors in each of the doors (circuit breaker protected)
LT DOOR CB 25A (System power for left windows)
RT DOOR CB 25A (System power for right windows)
The DDM contains four power window switches which are integral components. Closing any of the normally open, rocker type switches provides the DDM with a request for power window operation. The switches for the two front windows have three positions UP, Down and Express Down, while the switches for the rear windows have only two positions, UP and Down. Each of these switches and their positions is a direct input into the DDM. Upon receiving a request for power window operation, the DDM, transmits a Class 2 message indicating the switch and it's changed position.
The PDM contains a single power window switch that is an integral component. Closing of this normally open, rocker switch provides the PDM with a request for the front passenger power window operation. The switch for the front passenger window has two positions Up and Down. Each of these switch positions is a direct input to the PDM.
The two rear passenger doors have there own switches. Each of the switches contain a power window up and down relay. A switch activation alone can control the up and down functions of the rear windows. However the BCM, upon receiving a Class 2 message from the DDM, can control the set of relays which will activate the rear window motors.
You need a scan tool to diagnose these systems
Power Window Inoperative - Driver Door
Did you perform the Door Systems Diagnostic System Check?
Go to Step 2
Go to Diagnostic System Check - Door Systems
Operate the driver power window in the UP and DOWN directions.
Does the driver power window operate properly?
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
Go to Step 3
Mar 24, 2015 | Cars & Trucks
Dec 19, 2013 | 2010 Ford Fusion 2.5
Jun 13, 2012 | 2006 Ford F-150
May 09, 2011 | 1995 Jeep Grand Cherokee
Mar 20, 2010 | 2003 Hyundai Tiburon
Nov 08, 2009 | 2006 Lexus Is 250
May 23, 2009 | 2003 Ford F250 Super Duty Crew Cab
Apr 27, 2009 | 2004 Ford Mustang
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: