Question about 2000 Pontiac Grand Prix

Open Question

Wont start lights will turn on but nothing els works

Ive checked fuses batt connections

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 130 Answers

SOURCE: wont start

make sure transmission is in park.

slide a stick or twig up underneath the steering column which will hold a specialized switch in place. Try the ignition. Should it start, the actual problem in the transmission interlock switch for the transmission [located in the center console] which also protects the ignition from turning on [secondary switch prior to the ignition switch]. What a ***** to have found... took me 8 hours but GM wanted 800$ for the fix.

Posted on Oct 15, 2008

  • 21 Answers

SOURCE: 1990 pontiac j6000 wont start

Crank position sensor bad?
Are you sure the fuel pump is working? Might be the sending unit in the fuel pump that is bad. Clogged lines, clogged fuel injectors, clogged fuel filter, all things that could be checked.

Posted on Apr 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power and batt is good


My first guess would be a dead cell inside the battery, or a blown fuseable link between the battery and the fuse box.
Someone would need to check the battery connections and fuse box with a meter.

Jun 01, 2013 | 1996 Ford Taurus

1 Answer

Won't crank has new battery


if the lights come on you'r getting juice from the batt,if they go out when you crank the motor over batt is bad or you have bad batt connections

Aug 27, 2012 | 2000 GMC Jimmy

1 Answer

Just replaced the tranny on my 1990 jeep wrangler 2.5l. when i connected the batt cable to turn on the flashers the hot wire off the starter was touching the side of the stater. there was a little smoke...


check for power in the big fuse box sounds like you have overloaded a cable from the battery to this supply box also make sure the earth from engine to chassis is connected

Oct 22, 2010 | 1990 Jeep Wrangler

1 Answer

My night time head lights wont come on. Ive changed multipurpose switch and lights still wont come on. Day time lights run in the day just fine, Earlier when my my lights started going out at night. I...


first thing to do is check all your grounds batt. to engine batt. to body batt. to frame then have someone scan the bcm body controll module that operates the headlights ,int.lights, doorlocks, ect.

Mar 24, 2010 | 1998 GMC Sonoma

1 Answer

When U turn ign key no check eng light all others turn on try to start ,nothing wigle key and clock,heater fan climate control sorta work but as you continue to turn key it shuts of and nothing ive...


You may want to check the engine to boy gounf . It is located at the rear top of engine anfd is bolted to the engine intake manifold and screwed to the firwall. It's just a short stainless steel braided strap Remove ,clen rnds and sand of any pat tthat would interfere with a good connection. Good Luck _Ned_

Oct 15, 2009 | Mazda Millenia Cars & Trucks

2 Answers

Golf mk4 wont start has power wont run


Part of the Speedo on a Golf has a connection to the engine immobiliser If a fuse has popped it was for a reason Is there a warning light on the dash display which looks like an engine with an arrow through it ?? You need a man with a laptop and software to check which codes have ben lost or corrupted

Jun 14, 2009 | 2002 Volkswagen Golf

1 Answer

Charging problem 1991 volvo 240


14.6 means your voltage regulator or diode is suspect Despite having new alternator .Ive cross refrenced your smptoms in the haynes workshop manual and alternator is your only end answer.The haynes test is to start vehicle with multi meter connected across the battery terminals,increase the engine speed until the reading remains steady should be approximately 12 to 13v and no more than 14v.switch on as many accessories as possible(headlights heater blower radio etc)check that the alternator maintains the regulated voltage at around 13 to 14v.If the regulated voltage is not as stated then alternator is to be repaired/replaced.Good luck with it and a happy new year.

Dec 29, 2008 | 1991 Volvo 240

Not finding what you are looking for?
2000 Pontiac Grand Prix Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...