Question about Ford F-250

1 Answer

Starter motor keeps running - F-250 Ford Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Ford Master
  • 1,190 Answers

Starter solinoide or ignition barrel faulty ! try key first by rotating slightly back from engauging cranking , if no change then remove live feed off solinoide from battery and hold in place by hand at battery end then try cranking to see if it stays engauged !

Posted on Jan 26, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The starter motor continues to run when the car is running on a 1999 Buick century


The Starter motor can keep running because of a number of things. It receives its power from the large contacts (switch) in the starter solenoid. WHen engaged, this starter sol. allows high current 12 volts to run the starter motor.
A number of things can cause the starter solenoid to stay engaged:
A) stuck starter solenoid mechanicals. probably not the cause
B) more likely a defective start position on the ignition switch in the ignition switch
C) possibly a gummed up ignition key tumbler
I would start troubleshooting with a schematic. Make your own or purchase a service manual. IF you pull off the wire from the switch (in the center console) which actuates the starter solenoid, and the starter motor continues to run, then its not the switch or the key tumbler. its the solenoid.
Troubleshooting is the logical process of elimination.

Jan 08, 2017 | 1999 Buick Century

1 Answer

1995 Buick road master I put a flywheel in now it's cutting my started keep putting new starters in is engine my no good


You keep replacing the starter motors?
The starter motor may be fitted incorrectly and isn't meshing with the ring gear properly.

It may be that ring gear - the teeth - on the flywheel are worn/damaged or even the wrong fit for the starter motor.

Another alternative is that the flywheel isn't torqued up correctly and consequently it - and the ring gear teeth - are out of line. However, I would have thought that an out of balance flywheel would also cause vibration problems. Your car runs okay?

Mar 25, 2016 | Buick Cars & Trucks

1 Answer

The starter motor keeps running after you turn the key off


try to check your ignition cylinder specially the back plate of the cylinder for loose or short.

Mar 10, 2015 | Cars & Trucks

1 Answer

What makes a replacement starter keep on running, on a Ford Expedition ?


Either the starter is getting electric power from somewhere it is not supposed to get, or the gear drive is sticking on the flywheel.

Jun 11, 2013 | 1998 Ford Expedition

1 Answer

1999 range rover 4.6she starter keeps running


Just changed mine for the same problem!!! replaced starter, problem solved! Unusual design by american standard, for the main motor to continue to drive, !?

Jan 29, 2013 | 1999 Land Rover Range Rover

2 Answers

99 dodge ram 3500 diesel starter will not shut off with key, turn off key and starter moter stays engaged and engine has run on. had to disconnect both batteries. gently tapped starter selenoid with hammer...


it sounds like the starter solenoid contacts are not separating to stop the starter from turning.the run on is due to the starter not stopping causing the motor to continue to spin.replace the starter unit as it will have damage due to being engaged with the motor running,also have the flywheel inspected to make sure the teeth are not damaged on it.

Apr 12, 2011 | 1995 Dodge Ram 3500

1 Answer

1990 300zx solenoid/starter relay


I would go for the starter motor personally first, as thats the part that cranks the engine over :)

that gets power, then it starts turning the flywheel, the starter motor also keeps the engine running inbetween the engines power strokes while its running.

Go for the starter relay & the starter motor :)

Thanks.

Apr 10, 2009 | 1990 Nissan 300ZX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...