Question about Cars & Trucks

1 Answer

Neck breaking slam when engaged to either forward or reverse honda 2001 civic lxi

Already checked shifting solenoids,linear solenoids,changed X'm oil original (cvt)

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 42,603 Answers

Have a pressure test done on the transmission to check for internal problems . Have the bands and clutch packs adjusted.

Posted on Dec 28, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Benimur
  • 6966 Answers

SOURCE: idling problem when ac turned on honda civic lxi 1999

Hi,

To my knowledge (at least in my country), some Honda Civics have a compensator solenoid the pushes on the throttle that adjust the engine's RPM to its standard idling when the A/C compressor is activated. Technically, this solenoid is nothing more but a coil and a plunger. When the compressor runs, the same relay activates this solenoid and pushes the plunger forward increasing the RPM. Pls check/clean/adjust/replace as deemed fit and necessary.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Posted on Sep 23, 2008

  • 77 Answers

SOURCE: check engine reads P0740 honda civic

I am sorry to bum you guys out, but this usually means the piston in the torque converter is bad. The converter needs to be replaced along with a transmission flush.

Posted on May 26, 2009

  • 260 Answers

SOURCE: my 97 honda civic dx check engine light keeps coming on

Had this issue did you replace the exhaust

Posted on Aug 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My mothers 2000 honda civic will not drive in reverse or forward position?


Make sure the shift cable is working properly at the shifter and the transmission if you have good action then check the transmission oil (make sure you use honda synthetic oil or the car will shift hard) if they get low on oil they will send the shavings through the shift solenoids you can try to drain the transmission oil with the drain plug. (there is not a serviceable transmission filter )take the solenoids off and clean the screen in them but more then likely you will have to dissasemble the trans. The trick to these transmissions is never let them run low on oil or they get contaminated with the clutch shavings that go into the shift solenoids.they are famous for leaking axle seals if you get it working check your axle seals and replace them if they are leaking

Dec 10, 2010 | 1999 Honda Civic

1 Answer

Shifting out of first takes longer and feels rough


1-2 shift is delayed and harsh, may not shift into OD: Check TPS for smooth and linear electrical response over the entire range of motion. If not, replace.

Shift suddenly become very hard. When going from park to either reverse or drive it slams into gear. 1-2 and 2-3 shifts are also harsh. All gears seems to work. Problem may be intermittent: Check TPS for smooth electrical response. If the response is jumpy or erratic at all, replace TPS.

Extremely harsh shifts from P or N, normal shifts at WOT: EPC (Electronic Pressure Control) solenoid failed. Easy fix in pan. Fix as soon as possible or hard parts will eventually break.

Visit a transmission shop and have them put a line pressure gauge on the pressure test port and go for a drive to verify proper line pressure. Base pressure at idle in P,N,OD should be around 70psi and around 140psi in R. Max line pressure should be at least 190psi at WOT in 1st or 2nd, 225psi is optimum. If base pressure is low, trans or pump is worn out. If max pressure is low, check EPC solenoid. If reverse is slow to engage, and line pressure does not come up to at least 130psi in reverse, replace the boost valve with a Transgo 0.500" boost valve (easy fix in pan).

Here is just a few things that are common to what you have described, I would start checking the Wire leads to the TPS and TPS it self. Good luck and keep me posted, be glad to know you got your Transmission running 100% again.

Jan 24, 2010 | 2007 Chevrolet Silverado Classic SS New...

1 Answer

My 1997 Honda Civic has a few seconds delay engaging into Reverse. Forward gears have no problems but when i put it in "R" it takes like 5 seconds before engaging. Fluid level is ok.


Basically you should have the vehicle's reverse circuit pressure tested by a certified ASE Transmission Repair Shop.They will be able to tell you if there is a blockage in the cricuit, reverse shift solenoid is on its way out ,or a gearing problem even if there is a manual shift valve issue. Good luck

Oct 12, 2009 | 1997 Honda Civic

2 Answers

Tranmission after starting when shift to reverse doesn't move


Hi,
Though I'm not an expert on Hondas, I've been around a few trannies. An automatic transmission generally does not have a drain plug. The pan bolts are loosened and the transmission fluid is drained into a catch pan. A new gasket then applied to the pan and the pan then bolted back to position then new fluid added.
Are you sure of your fluid level? Sometimes a low level of fluid can cause a problem like this.
Hope this helps...
Good luck!

Aug 10, 2009 | 1999 Honda Civic

1 Answer

91 accord s light stayed on and I replaced the tcm and the s light is out and it shifts fine in all forward gears but slips bad in reverse,what can that be


Have you flushed trans? Other problems with these is the shift & linear solenoid pack. They are available aftermarket.

Mar 28, 2009 | 1991 Honda Accord

1 Answer

Car won't drive forward or in reverse


this is the speed shift solenoid and a possible faulty transmission filter as well. the best thing for this issue is to pull the tranny and check for filter clogs and change the shift solenoid.

Mar 10, 2009 | 2001 Pontiac Bonneville

2 Answers

1998 honda accord 4cyl. linear solenoid?


The linear solenoid is what links the gears to eachother. When you go from one gear to another it acts as a bridge to cross over without hesitating if you had to tread through the water before getting to the other side. What you might want to try first before that it to change the fluid out and the filter as well if you haven't already. (fill back up with Lucas transmission oil prefered)

Feb 23, 2009 | 1998 Honda Accord

2 Answers

98 Civic Auto Trans Slippage


you need to replace clutch pack for that gear can be ordered seperately from parts store or dealer if you want to save money call peach street auto recycling at 1800-365-2341 for a warrantied used one! also might be time for change trans filter and fluid filter could be slightly clogged but I lean towards clutch pack I replace these alot on Hondas

Dec 12, 2008 | 1998 Honda Civic

1 Answer

Idling problem when ac turned on honda civic lxi 1999


Hi,

To my knowledge (at least in my country), some Honda Civics have a compensator solenoid the pushes on the throttle that adjust the engine's RPM to its standard idling when the A/C compressor is activated. Technically, this solenoid is nothing more but a coil and a plunger. When the compressor runs, the same relay activates this solenoid and pushes the plunger forward increasing the RPM. Pls check/clean/adjust/replace as deemed fit and necessary.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Sep 23, 2008 | 1999 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...