Question about Jeep Cars & Trucks
Hi I have a jeep CHEROKEE renegade 2003. The air condition is working and it's blowing air to the feet and front window screen but it doesn't blow air to the face vents at all not matter how I switch it still no air coming from the face vents And I still don't know why and what the problem Please I need help Thank you
The most probable cause is that the louwers that should open to allow air in that area is jammed shut. If electronic could be a bad motor, if mechanical cable, bay be gunked up. Do the lever complete its full length of travel or is it resisting and have to be forced?..
Posted on Dec 27, 2013
Testimonial: "Thx for your solution So what do you think could be the problem and how it can be fix.? Because I don't want to remover the whole dash off -:( Thx"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a vacuum leak under the hood somewhere. Check the vacuum at the speed control servo. If there is no vacuum on the line with the engine running, follow the line to find the leak. The vacuum reservoir is mounted under the battery tray. I would look in that area after confirming no vacuum at the servo.
Posted on Apr 27, 2009
There is a flap that directs the air. the flap is controlled by a vacuum actuator. This is located inside the venting. The actuator is connected to little vacuum hoses that attach to the temperature control switch. Either the flap is stuck, or the actuator has gone bad.
Posted on Jul 01, 2009
SOURCE: 2005 tahoe no air blowing
as long as all the fuses are good.. its probably the blower resistor/module... located next to the blower motor under the pass. side of the dash..
Posted on Oct 13, 2009
Changing the blower motor resistor will solve the problem of the unchanging fan speeds and the blower motor having power when the ignition is turned to the off position. Beware that there are three different kinds of blower motor resistors. There is a manual, automatic, and a digital that in appearance is greatly different from the first two. The blower motor resistor is located on the passenger side below and behind the glove box. The kick-plate under the glove box will need to be removed by two screws and wha-la, behold is the motor and resistor.
Posted on Oct 14, 2009
Tips for a great answer:
Sep 29, 2013 | 2003 Jeep Grand Cherokee
Aug 05, 2012 | 1995 Jeep Grand Cherokee
Sep 13, 2009 | 2000 Jeep Grand Cherokee
Jul 01, 2009 | 1999 Jeep Grand Cherokee
Jun 09, 2009 | 2003 GMC Envoy
Jun 03, 2009 | 1997 Jeep Grand Cherokee
Apr 30, 2009 | 1996 Jeep Grand Cherokee
161 people viewed this question
Usually answered in minutes!