Question about Hyundai Motor 2004 Accent

1 Answer

High Level Brake bulb replacement

Hi I need to change the bulb in my high level brake light, but the owners manual doesn't tell you how to do this. Help Please!!! Hyundai Getz 1.1 CDX 2004

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

If memory serves, there are two screws holding this light assy to the rear package deck. They are covered (LH and RH side of this assy). remove the covers and using a phillips screwdriver, remove the screws and lift the assy up and away from the rear glass. you now have access to the bulb and socket.

Posted on May 27, 2009

  • Hawkwindzoo Sep 15, 2011

    For anyone who may look at this thread (as I did) looking for the answer - on a 2004 1.1CDR Getz with the light grey high level stop assembly, the grey cover is on two clips, you need to pull the grey plastic towards you but a fair bit of force is required as the clips are strong. The bulb is a 12V 7W

  • Andy From-Sligo
    Andy From-Sligo Jun 03, 2012

    as Hawkwindzoo said pull the grey cover out of the clips and then twist the bulb out at the back of the break light. I think the bulb you need is 12v 16w glass wedge type capless (no metal base cap) lamp well it is on our Getz. Same lamp and wattage is used for the reverse lights as well.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't the high level brake light work?


High level brake light is connected , in parallel with, all other brake/stop lights.. It is not on a separate fuse, so, check, or replace the other stop lights.
Or could be a bad ground on brake lights, but not on high level light.

May 02, 2015 | 1993 Honda Accord

1 Answer

HOW DO I CHANGE THE BULB FOR THE HIGH MOUNT STOP LIGHT?


From the Owners Manual

Here's what the Owners Manual has to say about the high-mount brake light replacement:


  1. Pry the light assembly away from its housing and push rearward to disengage it from the retaining clips.
  2. Lift the front of the light assembly from the parcel shelf
  3. Disconnect the light assembly wiring and replace the light assembly.

Oct 25, 2010 | 2005 Ford Taurus

2 Answers

Rear brakelights dont come on fuses and bulbs are fine rear window brake light works


If the high level brake light works, then the brake light circuit is fully functional.

Brake light bulbs may LOOK fine, but can still have failed. Often folks don't notice that one bulb has failed until the second one has blown; it's then easy to incorrectly assume that the fault is more complex.

Try replacing the brake light bulbs: if that doesn't work then please report back for additional options.

Sep 24, 2010 | 1999 Audi A4

3 Answers

Camry CE 2001: Changed the brake light in the


hi the rear high level brake warning light in rear screen ? works with the other two brake lights at same time when you press brake pedal with ignition on ? so may i suggest you check the other brake lights are working ? if not ? check these bulbs? reason being that from the symptoms you describe that high level light is staying on ? it would suggest that the brake light switch at the pedal is not operating ie not putting brake lights off when pedal is off and would suspect the brake lights have been on for some time and burned bulbs out due to the brakelight element in bulbs are high wattage if you check on what i have suggested? and is the case ? come back and will advise you how to adjust brake switch easy diy hope this helps? best wishes from the uk

Jan 01, 2010 | 2001 Toyota Camry

1 Answer

Rear side brake lights won't work after fuses/bulbs replacement


If the high level brake lamp works and the other 2 lamps have good bulbs, then there is a power loss, most propably with the installation. You should go to an auto electrician to see where the break is.
If someone has recently done any work on the electrics, you should recheck. It is not a seperate fusable power supply system or brake switch for the high level brake lamp, it will take its power from the fused system that the other 2 have.
Hope this helps

Oct 04, 2009 | 1998 Land Rover Discovery

1 Answer

How do i get into the high level brake lights in


i beleive the cover snaps on if not you may need to remove door trim

Jul 26, 2009 | Audi A4 Cars & Trucks

2 Answers

My high level brake light has bruned out,(third brake light). I was informed by the dealer the back window panel has to be removed to replace the 3.00 dollar bulb, total cost 75.00 dollars. With some


replace the bulb...??? This requires you remove the rear package deck (to access the bulb & socket). to do this, remove the seat bottom (two bolts hold the rear seat bottom to the chassis, then remove the bolts which hold the shoulder cushions (LH & RH - 12mm bolts) then remove the cosmetic molding around the trunk access (7 to 8 screws) then remove the "C" pillar covers (SRS curtain airbag LH & RH) to access the rear deck package & access the third brake lamp bulb. replace it, then reassemble.

May 26, 2009 | 2006 Hyundai Sonata

1 Answer

High level brake light not working


check light connector under boot for power getting to light, if there is power then replace light and if no power then you have to trace wire from connector back until you find power loss

Apr 10, 2009 | 1999 Subaru Legacy

1 Answer

Hyandia Accent


not sure which top tail light you mean? do you wish to replace bulb or actual lamp on the rear screen? this is the high level brake light ! OR do you wish to replace bulb in one of the rear tail lamps offside/nearside ? which ever ? the h/level brake light bulb is accessable for bulb from the rear panel on hatch behind lamp bulb is 16 watt capless push in type

Nov 10, 2008 | 2003 Hyundai Accent

1 Answer

Center High Level Stop Light


that s exactly it and its a 194 bulb/ Please rate my response thank you very much

Oct 28, 2008 | 1994 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
Hyundai Motor 2004 Accent Logo

1,304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...