Question about Mercury Cars & Trucks

Open Question

Ball joint makes noise in mercury milan - Mercury Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 2000 Mercury Sable Ball Joint?

wheel bearing. Lift the car so the wheel is not supported and twist it up nd down,, then right and left. You will feel the play.

Posted on Aug 05, 2008

Shadowmaru
  • 33 Answers

SOURCE: 96 mercury sable ball joint repair

Sadly there are no free online manuals for this vehicle. The best way to find information on repairs for free would be to join a Sable/Taurus car club (since the two cars are the same at this generation.)

Posted on Feb 11, 2009

  • 67 Answers

SOURCE: clicking noise front driver side after repairs

CHECK THE LINK RODS

Posted on Apr 17, 2009

  • 1 Answer

SOURCE: Front end Rumble Simalar to worn Ball joint Noise

this is going to sound craZy but i had the same problem . 5 different techs, still same problem. sounded like front end was coming through the floorboard. CHANGE ALL SWAY BAR BUSHINGS. QUIET AS A CHURCH MOUSE. GOOD LUCK

Posted on Sep 03, 2009

  • 1 Answer

SOURCE: lower balll joints to my 2002 lincoln ls are bad

You can purchase the lower ball join on ebay for around $70. The piece will simply "press in" just as any ball joint replacement would. Find a mechanic willing to do the work for you if you bring him the parts. Just go to ebay and search 2002 lincoln ls lower ball joint. It's a fairly small piece, but you'll have to have it installed by a professional. I just replaced mine...

Good luck!

Posted on Oct 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had my tierods and rotors replaced on my car and now I hear a rubbing noise in the steering and alot of creaks under the car


There should be NO creaking noises coming from this repair of tie rod ends because they are supposed to be greased before the job can be called complete. There should be NO rubbing noises either from rotor replacement. Possible minute for a short period until the brake pads wear in to fit new rotors, but that shouldn't be noticeable. I would take the vehicle right back to the man that did your repairs and tell him the problem and ask him what he will do about it. From what I remember, OEM ball joints and tie rod ends are manufactured with NO grease fittings in them. They have to be drilled and grease fittings applied so they can be greased for longevity. Find out from your installer on this point. If there is no grease fittings, have them installed and greased. And new rotors normally would call for new brake pads also.

Dec 01, 2014 | 2006 Mercury Milan

1 Answer

2005 mercury Monterey. We just replaced both rod's & drivers CV joint & when we back up and turn the wheel it still makes noise.


top and bottom ball joints , upper suspension mounts ,anything that moves when you turn the wheel basically could be the problem , take to a mechanic will save you time and money

Jun 22, 2014 | Cars & Trucks

1 Answer

81 Mercury Cougar Ball joint replacement.


Remove the cotter pin.
Loosen the nut most of the way, but do not remove the nut.
Use a ball joint remover, strike the tool until the ball joint separates from the frame.
Remove the nut, and drop the ball joint assembly.
Tape the threaded area of the steering side, so you can replace the new ball joint in the approximate area.
Unscrew the ball joint.
Reverse for install.

Then have your alignment done.

Feb 21, 2014 | 1993 Mercury Cougar

1 Answer

96 mercury sable wagon popping noise


What about the strut mounts. Have the ball joints be checked. If u gas the car does it pop? Or maybe a wheel bering if its really loose.

Jun 16, 2012 | 1996 Mercury Sable

1 Answer

BALL JOINTS SQUELL WHEN TURNING LEFT OR RIGHT


the only thing you can do with ball joints is start with greasing them its easy and cheap if that dont work than they need to be replaced

Dec 19, 2009 | 2000 Mercury Sable

1 Answer

How to change lower ball joint on 95 mercury cougar...do you have to take lower countrol arm off to get ball joint out?


i would replace the whole control arm because the bushing are probably worn out too and it's easier than pressing out the ball joints. make sure you have a spring compressor tool when you do this or you could get seriously injured

Nov 16, 2009 | 1995 Mercury Cougar

1 Answer

2000 Mercury Sable Ball Joint?


wheel bearing. Lift the car so the wheel is not supported and twist it up nd down,, then right and left. You will feel the play.

Aug 04, 2008 | 2000 Mercury Sable

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

fordexpert

Level 3 Expert

5467 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...