Question about 1999 Mercury Villager

1 Answer

Greetings. i have a 96 mercury villager that neither the front or rear ac is getting cold. fan blows hot air... was told that it did not need freon and that the compressor checked good... any other ideas

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Yes it sounds to me like the thermostat control on the dash is malfuctioning. either that or heater control valve under the dash that converts the flow of air around or through the heater core could be stuck in heater mode. hope this helps. i dont know your financial situation but if it was me i would aquire one from a salvage yard in order to test because that part is quiet expensive from the dealer

Posted on May 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My gmc yukon 2000 slt rear ac blows hot air when i have ac . on and the front works fine .


I have a 2000 GMC Savana Van SLT with front and rear AC/Heat. My front would blow hot while the rear blew cold with AC on. It turned out to be low on Freon. It's hard to know if you have the right amount of freon installed because pressures vary depending on the ambient temperatures. So the best way is to remove all the freon then reinstall the recommended amount as listed on the evaporator housing near the firewall. This worked fine for me... works like new after installing the correct amount of freon.

Jul 01, 2014 | 2000 GMC Sierra

1 Answer

Front a/c blows cold air but back is blowing hot air


Could be low on freon, a faulty expansion valve on the rear system, or other issues. Can you tell if the rear ac lines are hot and cold ?

Aug 04, 2012 | 2001 GMC Yukon

2 Answers

What's your problem?I have a 1996 Chevrolet Suburban. The AC is blowing out hot air. I have had the truck for 6 years, every Summer its the same thing. The ac does not get cold, I take it to the m


To clarify - - if the truck has rear and heat, you have two heater cores and two evaporator cores. The evap cores carry the freon.
If the leak is in the evap core in the front, the price is probably right.

Jul 06, 2012 | 1999 Chevrolet Suburban

1 Answer

Ac on 96 grand marquis continues to blow hot air with new compressor and freon?


The first question is do you know if the ac compressor is running ?
If one ac line is hot and the other is cold you may have a blend door problem under the dash.

Jul 01, 2012 | 1996 Mercury Grand Marquis

1 Answer

Air blows cold in rear but warm in front vents.


If it is cold in the rear, that eliminates the "freon" part of the system. (It apparently has enough freon and the compressor is apparently working.)

So that leaves you with a blend-air door problem on the front A/C unit. That may be a blend-air door actuator, a broken blend-air door, or a faulty control head. (Proper diagnosis required)

May 18, 2012 | 2002 Mercury Villager

2 Answers

My 1999 mercury villager ac works in the front but no cold air blows in the back. What needs to be fixed?


it needs to have the rear expansion valve to be inspected for metal, if clean repl expansion valve and recharge a/c

May 20, 2010 | 1999 Mercury Villager

1 Answer

How can I determine if my compressor is out on my


If you still get cold air out of the rear vents but the front only blows hot air you may have a bad temp door actuator in the dash, it may be stuck on hot and not able to move to cold air. However if you are low on freon with a truck that has front and rear ac then there will be a temp diff between the two. If it is hot air out the front like the heat is on then you have that actuator problem but if it is cool air about the same as the outside air temp then you may be low on freon.

May 23, 2010 | 2004 GMC Yukon

1 Answer

1999 Villager: My 1999 mercury villager ac works in the front but...


you could just be low on freon. Add 1 can & see what happens.
Usually the rear works but not the front. I'm assuming the blower works back there.

It could also be the rear control for hot/cold. You can get an assembly at slavage yard for $10.

i have an extra if you find that is the failure.

go here and our team will help for free.

http://groups.yahoo.com/group/villagerquest/

May 18, 2010 | 1999 Mercury Villager

1 Answer

A/c problem for mercury villager 96


you are probably low on freon. Front is fixed orifice tube sytem. does not tolerate low freon.

rear is a valve system. get feon level checked.

go here for more help.

http://autos.groups.yahoo.com/group/villagerquest/

Apr 06, 2009 | 1996 Mercury Villager

Not finding what you are looking for?
1999 Mercury Villager Logo

306 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...