Question about 2004 Nissan Quest

Open Question

2004 nissan quest trouble code p0128.what does this mean and how can I fix it

Just driving no problems then the service engine light came on I hooked up code reader and got p0128

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
co7196
  • 3433 Answers

SOURCE: 2004 Nissan Quest - Engine chatter/knocking

Ther e is a chance your injectors are leakin g down and there is excess fuel in the cylinders. Not a good thing. So, you fuel pressure and injectors need chkg. good luck

Posted on Jun 09, 2009

Ad
  • 14036 Answers

SOURCE: 2004 Nissan Quest began shaking while driving then

SOUND LIKE FUEL PUMP.SCAN IT TO MAKE SURE.IT ALSO COULD BE FUEL PUMP RELAY OR FUSE.

Posted on Aug 10, 2009

  • 115 Answers

SOURCE: nissan quest 1999 engine light codes P0325 &

P0325 is for the knock sensor.

P1105 is for the manifold absolute pressure sensor (MAP).

In either case diagnostic tests need to be performed to rule out faulty sensors or if something else is causing the sensors to give the computer inaccurate information.

Posted on Sep 02, 2009

dsacco86
  • 1077 Answers

SOURCE: service engine soon, TCS off, SLIP

The oil change wouldn't cause this problem. Just in-case, check the engine oil level.

There are many emission sensors in the car that will make the engine light come ON. Best way to find out what's going on is to have an auto-parts store hook up a engine code reader and tell you what the code means. Most auto-part store will do this for free.

Posted on Oct 11, 2009

Testimonial: "very helpful. i have the mechanic checked the car , the sensor says it has a malfunction in P0340"

  • 51 Answers

SOURCE: 2004 Nissan quest battery drain

check your alternator to see if its charging fully,i think you will find this is the cause

Posted on Feb 15, 2010

Testimonial: "I will try to do a test on alternator, please specific what I should do? thanks."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 Nissan Quest has check engine light will not go off


Did you have it check for DTC'S - diagnostic trouble codes ? If the light is on it's a good chance diagnostic codes are set. Do the diagnostic's for the code , find an fix the problem an the light will go off .

Jul 19, 2017 | Nissan Cars & Trucks

1 Answer

2004 Envoy Code P0128


This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostate if its not overheating get it to a mechanic its probly stuck open

Dec 11, 2013 | 2004 GMC Envoy SLT

1 Answer

2004 trailblazer code po128


P0128:
P0128 OBD-II Trouble Code
Technical DescriptionCoolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

What does that mean?This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125

In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.

CausesA code P0128 may mean that one or more of the following has happened:

Low engine coolant level .
Leaking or stuck open thermostat .
Faulty cooling fan (running too much) .
Faulty coolant temperature (ECT) sensor.
Faulty intake air temperature (IAT) sensor .Here's a link on replacing your thermostat.

Feb 06, 2013 | 2004 Chevrolet TrailBlazer

1 Answer

I have the po507 code on my nissan quest .. it is this


this obd2 trouble code table can help you understand the meaning of code.
for p0507, you can try this:

This DTC is more of an informational code, so if there are any other codes set, diagnose them first. If there are no other codes, inspect the intake air system for air or vacuum leaks and damage. If there are no symptoms other than the DTC itself, just clear the code and see whether it returns.

If you have an advanced scan tool that can interact with the car, command the idle higher and lower to see if the engine responds appropriately. Also check the PCV valve to see if it's blocked and needs to be replaced. Check the IAC (idle air controller) if equipped, verify it's operation. If available, try swapping in a new throttle body to see if that fixes the problem. On Nissan Altimas and possibly other vehicles the problem may be fixed by having the dealer perform an idle air relearn procedure, or other relearn procedures.

Aug 11, 2011 | 2004 Nissan Quest

1 Answer

Got codes from auto zone po128 &po506


P0128 - Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

This means that the engine's PCM detected that the engine has not reached the required temperature level within a specified amount of time after starting the engine. The intent of the P0128 code is to indicate a faulty thermostat. Similar codes: P0125

In determining the engine did not reach a "normal" temperature, it takes into account the length of time the vehicle has been running, the intake air temperature (IAT) sensor reading, the engine coolant temperature (ECT) sensor reading, and the speed of the vehicle.

Symptoms: You will likely not notice any drivability problems other than the MIL illumination.

Causes: A code P0128 may mean that one or more of the following has happened:
Low engine coolant level
Leaking or stuck open thermostat
Faulty cooling fan (running too much)
Faulty coolant temperature (ECT) sensor
Faulty intake air temperature (IAT) sensor

Possible Solutions: Past experience indicates that the most likely solution is to replace the thermostat. However here are some suggestions on troubleshooting and repairing a P0128 OBD-II code:
Verify coolant strength & level
Verify proper cooling fan operation (check if it's running more than it should). Replace if necessary.
Verify proper engine coolant temperature (ECT) sensor operation, replace if necessary.
Verify proper intake air temperature (IAT) sensor operation, replace if necessary.
If the above items check out good, replace the thermostat
If Nissan vehicle, check for Technical Service Bulletins (TSBs), as the ECM may need to be reprogrammed to correct the P0128 code


P0506 - Idle Air Control (IAC) System RPM Lower Than Expected

This P0506 code is one that's sometimes triggered on vehicles that have electronic throttle control. That is, they don't have a regular throttle cable from the accelerator pedal to the engine. They rely on sensors and electronics to control the throttle. In this case, the P0506 DTC (diagnostic trouble code) is triggered when the PCM (powertrain control module) detects an engine idle speed that is lower than the desired (pre-programmed) RPM.

Potential Symptoms: Most likely the only thing you'll notice is the idle speed is lower than normal so it will likely be rougher. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.

Causes: A P0506 DTC trouble code may be caused by one or more of the following:
A vacuum leak
An air restriction in the intake air path or exhuast
A faulty positive crankcase ventilation (PCV) valve
Damaged/failed/dirty throttle body
Internal engine problem
Failed PCM

Possible Solutions: This DTC is more of an informational code, so if there are any other codes set, diagnose them first. If there are no other codes, inspect for vacuum leaks, restrictions, and damage. If there are no symptoms other than the DTC itself, just clear the code and see whether it returns.


Check it, and keep us updated.

Apr 20, 2011 | 2004 Ford F150

2 Answers

My engine light is on and the faulty code is P0128, what is this mean?


Trouble Code: P0128

Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)
Possible Causes:


Insufficient warm up time Low engine coolant level Leaking or stuck open thermostat Inoperative engine coolant temperature (ECT) sensor Inoperative Cylinder Head Temperature (CHT) sensor

Dec 04, 2009 | 2004 Ford Focus

2 Answers

Service engine soon, TCS off, SLIP


The oil change wouldn't cause this problem. Just in-case, check the engine oil level.

There are many emission sensors in the car that will make the engine light come ON. Best way to find out what's going on is to have an auto-parts store hook up a engine code reader and tell you what the code means. Most auto-part store will do this for free.

Oct 11, 2009 | 2004 Nissan Quest

2 Answers

2004 Nissan Quest began shaking while driving then


SOUND LIKE FUEL PUMP.SCAN IT TO MAKE SURE.IT ALSO COULD BE FUEL PUMP RELAY OR FUSE.

Aug 10, 2009 | 2004 Nissan Quest

1 Answer

P0128 Code for a 2004 trailblazer with service engine soon light


Replacing it is the only fix. Sounds like it may be sticking open slightly.

May 27, 2009 | 2004 Chevrolet TrailBlazer

Not finding what you are looking for?
2004 Nissan Quest Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...