Question about 1994 Chevrolet Silverado 2500

Open Question

Remove ashtray 1994 silverado - 1994 Chevrolet Silverado 2500

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 67 Answers

SOURCE: how to remove high beam switch from 1994 silverado

The headlight dimmer switch is located about 1/2 way down the steering column. it is attached with 2 screws and is adjusted up against a rod that goes up and into the steering wheel housing. Tip. take a large plastic wire tie and secure the rod before removeing the switch so the rod stays in place when the switch is removed. after installing and adjusting the new switch just cut the wire tie and discard.
good luck. P.S. the ignition switch is in the same location. its the switch with only one black connector going to it.

Posted on Jul 10, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove Ashtray


How can I remove the entire ashtray - F150online Forums

www.f150online.com/.../315299-how-can-i-remove-entire-ashtray.html
Jan 6, 2008 - Can anyone tell me how to remove the entire ashtray door and all. I want to put ... Vehicle: 2007 ford F150 ... This is for a 2007 F150 KingRanch. ashtray/cup holder removal
Jul 7, 2011
Ashtray Removal?
Jun 11, 2009
Please help !!! Ashtray Removal on a 2000
Mar 3, 2007
ashtray/cupholder fix?
Aug 11, 200

Sep 29, 2015 | Cars & Trucks

1 Answer

How do i replace ashtray light on 1994 volvo 850


Go to you tube videos on volvo repairs by Robert, he's great!!

Oct 20, 2014 | 1994 Volvo 850

1 Answer

How to replace signal flasher on siearra


Turn signal flasher on 1994 Cutlass Sierra is mounted on clip attached to side of ashtray frame. Remove the ashtray frame by removing two screws on top and two on bottom. Flasher will be on right side.

Dec 24, 2011 | 1994 Oldsmobile Cutlass Ciera

1 Answer

How do you replace the bulb behnd the cluste on a 1994 Honda Acord, I removed the two top screws and the AC knobs, does the radion and console have to come out as well?


yes, the radio has to come out, as 2 of the trim panel screws are hidden by the radio.

1990-95 Accord
See Figures 7, 8 and 9
  1. Disconnect the negative battery cable. If so equipped, disable the Supplemental Restraint System (SRS).
  2. Lower the steering wheel to its lowest position.
  3. Remove the center console.
  4. Remove the ashtray and ashtray holder.
  5. Remove the radio/tape player.
  1. Remove the coin box, switches and dash light controller from the instrument panel.
  2. Remove the mounting screws securing the instrument panel. This is a large, formed piece of plastic-don't crack it.

11_30_2011_2_05_50_am.gif

Fig. Fig. 8: Instrument panel retaining screw locations on 1994-95 Accords

  1. Lay a protective piece of cloth over the steering wheel pad.
  2. Remove the four screws holding the instrument cluster. Pull the cluster forward enough to allow access to the wiring connectors.

11_30_2011_2_09_03_am.gif

Fig. Fig. 9: The instrument cluster is retained by four screws

  1. Disconnect the wiring harnesses and remove the instrument cluster.
  2. Individual instruments may be removed from the cluster after it is removed from the car. Avoid damage to any terminals or the printed circuit board.

To install:
  1. Install the gauge cluster; connect the wiring before it is fully in place. Install the retaining screws.
  2. Install the instrument panel. Make sure it is correctly placed. Install the retaining screws.
  3. If applicable, install the air vents.
  4. Install the coin box, switches and dash light controller.
  5. Install the radio, ashtray holder and ashtray.
  6. Install the console.
  7. If applicable, enable the SRS.
  8. Connect the negative battery cable.

Nov 30, 2011 | 1994 Honda Accord

1 Answer

How to change ashtray light in 2000 silverado truck


Remove the ashtray. Pull the plastic dash cover loose with a trim tool. Remove the passenger airbag switch (no need to unplug) and adjoining blank plate from thier slots with trim tool. You will see the lamp and cable on the right side. Stick your finger into the top of the empty ashtray slot and push up on the lamp clip to release. Fish the lamp out with a thin screw driver and twist the shade cover off. Pull the bulb straight out. Replace and reverse for installation. RE-clipping the assy into the housing might require removing the accessory frame that holds the airbag switch, but if you have limber fingers you should be able to reconnect.

Feb 17, 2011 | 2000 Chevrolet Silverado

2 Answers

How do i change the ashtray light?


Remove the ashtray and look for the screws that attach the ashtray bracket to the dash. Remove the ashtray bracket. The light fixture has a metal clip that you can squeeze to release the fixture from the ashtray bracket. (Sometimes it is easier to pry or push the clip gently sideways with a small screwdriver.) Replace the bulb and re-assemble.

Jan 25, 2011 | 2000 Chevrolet Silverado

1 Answer

The computer scanning port for 1994 honda accord


It's hidden behind the front ashtray. You have to remove the ashtray to access the port.

Nov 11, 2010 | Honda Accord Cars & Trucks

1 Answer

Need a fuel pump or relay and directions for 1991 940 volvo wagon


Try the relay first.
It's a lot cheaper than the pump.
The fuel pump relay, is located behind the ashtray, and above the fuses.
In order for you to succesfully remove the relay, you will first have to remove the ashtray housing, which is just a matter of two screws that hold the cigar lighter.
The fuel pump relay, is the one on the right side:)
Don't forget the thumbs up:)))
& Happy motoring

Jul 06, 2009 | 1994 Volvo 940

1 Answer

Where is the diognostics connector on a 1995 hondaaccord lx


HI...
If your car was made after 07 1994. is OBD2.
To see you need : REMOVE THE ASHTRAY...
and you will see behind the ashtray.

OK> I hope this work on your question.
Thank you for use fixya.

Jul 26, 2008 | Honda Accord Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...