Question about Ford Cars & Trucks

Open Question

Where is obd 2 port for 2004 ford thunderbird located

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1796 Answers

SOURCE: searching for obd 2 port

Hi!!

The OBD Diagnostic Link Connector is located in front seating area, passenger side, under dash, above kick panel, mounted rear of glove compartment.

Don't forget to rate this post, Good Luck!!

Posted on Apr 27, 2010

SOURCE: The 94' 3.8L Thunderbirds are all OBD I EEC-IV right? Just the 4.6L V8's that were OBD II, so the OBD II port in the 3.8L is just an unconnected inactive port correct?

OBD1 ---1983 thru 1995

OBD2--1996 thru 2013

No--both systems have a connector
to access data

Posted on Oct 04, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car MFG in feb of 1995 thunderbird lx looking for OBD port ,and do i use obd 2 OR OBD1


the ALDL that is in the picture is and OBD2 connector. some cars at this year had gone to OBD2 and some had this connector installed but still used OBD1 connector for codes and data stream. if you have found both then try both.

Aug 03, 2015 | 1995 Ford Thunderbird

1 Answer

Where is the obd port on 97 ford thunderbird?


It should be on the left side of the steering column under the das.

Apr 30, 2014 | 1997 Ford Thunderbird LX

1 Answer

Where is the location for obd II system for 1997 ford thunderbird


The OBD conector is located under the globe compartment, in the passenger side. The ECM is located in the pillar, beneath the trim cover... you must remove the cover and some of the plastic parts that protect it to access the ECM.

Jan 02, 2014 | 1997 Ford Thunderbird LX

3 Answers

Where do you plug in a actron obd scanner ?


The connector is located on the drivers side just above the parking brake pedal.

Hope this helps.

Zeppelinx12

Mar 05, 2011 | 1994 Ford Explorer Limited

1 Answer

Location of low pressure port of a/c system on a 96 ford thunderbird


Here is a system overview. The low side port is #5 in the picture. Hopw it helps ya.. Cobra
be966ed.gif

Item Part Number Description 1 19972 A/C Compressor to Condenser Discharge Line 2 19E762 A/C Charge Port Valve(High Side) 3 19D594 A/C Pressure Cut-Off Switch 4 19D742 Evaporator to Compressor Suction Line 5 19E762 A/C Charge Port Valve(Low Side) 6 19E561 A/C Cycling Switch 7 19860 A/C Evaporator Core 8 19C836 Suction Accumulator/Drier 9 19835 Condenser to Evaporator Tube 10 19D734 A/C Manifold and Tube 11 19703 A/C Compressor 12 19712 A/C Condenser Core

Jun 12, 2010 | 1996 Ford Thunderbird LX

2 Answers

Searching for obd 2 port


Hi!!

The OBD Diagnostic Link Connector is located in front seating area, passenger side, under dash, above kick panel, mounted rear of glove compartment.

Don't forget to rate this post, Good Luck!!

Apr 27, 2010 | 1997 Ford Thunderbird LX

3 Answers

Where is the OBD1 port located on a 1993 Ford Thunderbird??


On a OBD I car the connector is under the hood on the drivers side near the strut tower. It will be in a plastic cap marked EEC-TEST and have two connectors one with a rectangular shape that has a sort of pointed side and 4-6 wires in it and then a single wire with a gray plastic end on it.

Hope this helps

Mar 30, 2009 | 1989 Ford Thunderbird

1 Answer

2004 ford f150 when i plug in the obd2 into the cars computer port does not communicate with the obd code computer


The 2004 is a CAN system not OBD-2. It uses the same connector but it uses a different signalling to communicate.

Feb 21, 2009 | 2004 Ford F150

3 Answers

Location of engine code plug 1990 F250


Should be below the steering wheel close mounted just under knee board

Dec 31, 2008 | 1990 Ford F250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...