Question about Cars & Trucks
Holden vt v8 berlina starts fine runs good then when it heats up it will just shut down then eventually it would not start at all got it going. but like it is immobilised hazards are stuck on horn going and wipers on do they have a immobiliser
What year is this vehicle ?? holden is a GM product and as such we do not have these V8 motors in europe ,well anything over a 1000cc as the price of fuel but the astra /vectra /zafiro range from around 2002 or so had the engine computer bolted to the manifold and from the description this is whats happens to the se cars here in europe when the computer starts to play up along with the ABS and antiskid lights and engine symbol with the spanner through it comes on
Posted on Dec 27, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: IMMOBILISER DOES NOT WORK
The Hyundai Immobiliser system called the SMARTRA manufactured. by Bosch consists of the SMARTRA ECU which has its own CPU .
Have a look at links below:
Posted on May 21, 2008
If, when you switch the ignition on, you get a dash light on, the symbol is a car with a key overlaid, you have somehow activated the immobilser You could try disconnecting and reconnecting the battery, this may reset the immobiliser, If this does not work you will have to contact a Hyundai dealer to get the immobiliser unlock code.
Posted on May 23, 2009
Interesting problem.. since not US spec. Is there a 'remote keyless (fob)' programmed for this vehicle? That's the only way to DE-arm the immobilizer (anti-theft) feature (based on US specs). Unless you have this key fob (keyless entry remote... which must also be programmed for this vehicle), the only other way is wait 5 minutes with the existing key in the ignition, then it should start (US specs). You will still need to have an 'ACTIVE' keyless remote programmed for this vehicle... otherwise, you'll continue to run into this problem.
Posted on Jun 20, 2009
SOURCE: VW Polo Immobiliser P Reg
I have the same problem with immobiliser in a 2007 golf, i have yet to figure out the problem:
Immobiliser will not allow me to sart the car but, if I let it Cool off , sometime sit between 5-120 min. it will start. i have tried succesfully the disconnect the battery for 30 min.
- it not the battery, given boost and no result
- it's not the alternator, it been tested
- Starters are effected by Temperature, i think it's the starter.
let me know what you guys think
Posted on Apr 08, 2010
Tips for a great answer:
Apr 16, 2017 | Cars & Trucks
Oct 19, 2016 | Holden Cars & Trucks
Apr 25, 2016 | 1998 Holden VT Commodore
Feb 21, 2016 | Holden Cars & Trucks
Jan 30, 2015 | 1999 Holden VT
Jun 10, 2014 | 1998 Holden VT Commodore
you could leave the key in ignition in the on position for about 10 to 20 minutes this over rides immobiliser so you can start vehicle. the red immobiliser light that flashes goes out when you can start it. the light is the red LED next to the trip computer buttons
Oct 14, 2013 | 1999 Holden VT
Jun 13, 2012 | 1998 Holden VT Commodore
197 people viewed this question
Usually answered in minutes!