Question about Cars & Trucks

Open Question

Size of the front axle nut on 2000 Toyota echo

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 124 Answers

SOURCE: axle nut size

it could be 36mm

Posted on Apr 06, 2009

Ad
  • 136 Answers

SOURCE: how do i changs axle shaft on a 2001 toyota echo?

To remove the axle, losen axle nut with tire on the ground if possable, much easier without air tools. Disconnect strut at top of spindle, outter tie rod, and lower balljoint. Using a prybar pop axle out of transaxle. Some of these steps may be alittle different for your vehicle, these are general directions. If you are compitent enough to do this job then these steps will get you through it. If these steps confuse you pay someone else to do it.

Posted on Aug 08, 2009

  • 95 Answers

SOURCE: why is it a big worldwide secret what size the axle nut is

1 11/16 odd size i know. check with Sears or Harbor Freight.

Posted on Jan 14, 2010

SOURCE: what is the size for the nut on 1990 toyota

Its a 30mm...I'd suggest using a deep socket 30mm.

Posted on Sep 07, 2011

  • 1 Answer

SOURCE: socket size needed to remove wheel hub on a toyota celica

How do I get on to auto parts store

Posted on Apr 23, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size axle nut for 2000ford taurus se


Axle nut size? - Taurus Car Club of America : Ford Taurus Forum

www.taurusclub.com > ... > Suspension, Handling and Brakes
Jul 23, 2011 - 8 posts - ‎5 authors 1996 Mercury Sable front axle nut. I have read that the size is 30mm but the socket that I rented (30mm in a ... 2000 Duratec SE White Wagon Axle nut torque question. - Taurus Car Club of America ...
11 posts
May 4, 2012
CV Axle nut size
11 posts
Dec 9, 2011
Why Does The Axle Nut Need Such A Big Torque
11 posts
Dec 7, 2009
2000 Ford Taurus Front Wheel Bearing And Half-axle ...
11 posts
Apr 18, 2009
More results from www.taurusclub.com

Sep 28, 2015 | Cars & Trucks

1 Answer

How do i remove the axel on a toyota echo 2000 model


remove road wheel . remove axle nut , uncouple lower strut and pull disc housing out wards may have to tap axle. the axle is held in the diff housing with a c clip but come out with a sharp pull.

Sep 20, 2014 | 2000 Toyota ECHO

1 Answer

What size is the axle nut on 2007silverado4x4 1500


Hello,

You can find this specific information utilizing http://www.rockauto.com I looked under a Silverado 1500 and found the following: Thread Size: M14-1.50; Hex Size: 22mm; Conical Seat - 60degree; Zinc; Overall Length (In): 0.807; Open End Design: Yes; Steel

Sincerely,

Apr 08, 2014 | 2000 Ford Taurus

1 Answer

Front axle 2002 highlander


to remove front axle.to loosen front axle nut leave vechicle weight on wheel then just loosen front axle nut because axle nut torque at 217 ft lbs torquehard to loose axle nut with vechicle weight off wheel.okay. you need a 1/2 breaker bar and axle socket to loosen axle nut dont use 12 points sockets need go auto parts store buy right socket for axle nut.okay when you loosen front axle nut you need safely raise support vechicle. need to remove wheels remove fender apron seal remove transaxle fluid remove transfercase oil if you have 4WD.remove hub nut remove stabilizer bar link remove speed sensor remove tie rod end remove lower arm from the ball joint then slide the halfshaft from the hub then carefully pry the shaft from the transaxle.then install new front axle push in make sure front axle snap ring on front axle snap in place inside transmission just pull a little on front axle make its in place. when all done tighten front axle much as you can then when done putting every thing back in place.lower vechicle need torque front axle nut to 217 ft lbs.

Jan 12, 2013 | 2002 Toyota Highlander

1 Answer

What size socket do I need to remove the front wheel spindle nut from a 2000 pontiac grand prix


If you're trying to loosen the large axle nut, in the center of the rotor, it's either a 32mm or a 36mm socket.

Feb 24, 2011 | 2000 Pontiac Grand Prix

2 Answers

Whats size socket fits the front hub nut?


Its been awhile, but I believe 1 1/4" socket

Feb 15, 2011 | 1990 Toyota Camry

1 Answer

How do i changs axle shaft on a 2001 toyota echo? and what size is the 12 point axle nut?


To remove the axle, losen axle nut with tire on the ground if possable, much easier without air tools. Disconnect strut at top of spindle, outter tie rod, and lower balljoint. Using a prybar pop axle out of transaxle. Some of these steps may be alittle different for your vehicle, these are general directions. If you are compitent enough to do this job then these steps will get you through it. If these steps confuse you pay someone else to do it.

Aug 08, 2009 | 2001 Toyota Echo

1 Answer

How do you install a alternator in a toyota echo?


-disconnect battery (-) terminal.
-remove plastic cover to the left of the radiator(when looking from the front)
-loosen off 12mm bolt from top of alternator
-loosen off 14mm bolt from bottom of alternator
-disconnect wiring harness at alternator and remove 10mm nut holding the main wire.
Push alternator towards engine to slacken belt tension, then remove belt
-finish removing 12mm and 14mm bolts and remove alternator from the car.
-Replace in reverse order.
When tightening belt tension becareful what you pry against. You can easily damage the oil control solenoid the controls the camshaft.

Apr 17, 2009 | 2001 Toyota Echo

1 Answer

Need size plz


yes metric. Which axle nut? I will look up

Mar 05, 2009 | 2000 Nissan Quest

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...