Question about Ford Expedition

Open Question

2006 Ford Expedition Front Seat won't recline

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: front seat stays in the reclined postion..

The seat position is changed through the use of a cable that runs through a flexible tunnel, under the seat. In one case that I'm aware of, this cable got stuck around a projecting seat spring under the seat. When the seat was reclined and moved backward or forward, the cable caught on the seat spring and the seat had insufficient slack in the cable to release from the reclined position.

Posted on Jul 28, 2008

Ad
  • 53 Answers

SOURCE: front power seat

this is a common problem unfortunatly the switch is no good and must be replaced

Posted on Oct 19, 2008

  • 1 Answer

SOURCE: Remove car stereo from Ford Expedition 2006

Yes, the front panel needs to be removed but it takes 2 minutes. There are two screws holding the panel on, look above the instrument cluster. Once you remove those, gently pry the panel loose with a small flathead.. there are probably 8 plastic clips that hold it on.

Once the panel is loose, you'll need to disconnect all the plugs from the back, like the headlight switch, Info Center, and AC/Heater controls. You'll probably also need to lower the tilt wheel all the way down and place the shifter all the way down as well. You should be able to work the panel out then.

The radio is then held in place with 2 - 4 screws.

Posted on Apr 08, 2009

FIXYA Benny
  • 165 Answers

SOURCE: Power seat won't recline

are there any other leavers or dials around the seat that you can see that may operate the back rest independantly?
can you see the motors are they intact?
is there a button that selecets the particular funtion you wish to do?
it is functional, can you test that?
dirt is a major key in faulty switcches and can oftem be cleaned

Posted on May 05, 2009

emissionwiz
  • 77202 Answers

SOURCE: I have a 2006 Ford Expedition. The Air

you have a vacuum loss to the ac control head, the motors that divert air are vacuum operated, if you loose vacuum the system goes to defrost for safety reasons, the vacuum comes from the engine, then goes o a plastic vacuum tank under the hook start there, it is a 3/16 id hose.

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford 2008 expedition, power drivers seat won't recline, but everything else works.


Power Recliner
The driver seat has an electro-mechanical backrest adjuster. The backrest adjustment switch is located on the side of the seat cushion side shield and is part of the seat control switch. The recliner motor is mounted to the backrest frame. Power recliners and motors are only serviceable by installing a new backrest frame assembly.
Does yours have Driver and Passenger Power Seats Without Memory Or Power Driver Seat With Memory ?

B1666 Seat Driver Recline Motor Stalled On-Demand If the motor does not operate, Go To Pinpoint Test L . If motor operates, Go To Pinpoint Test M . Take it an have it check !
Does your

May 15, 2016 | Ford Cars & Trucks

1 Answer

Right front seat recline all the way back and will not come up. What can I do?


Move back and forth the black lever. Put some downpressure on seat. Sounds like the spring is stuck and wont disengage.

Mar 20, 2015 | 2007 Ford Expedition

1 Answer

Drivers side seat is reclined and seat won't go forward


That would be listed in the owners manual. If you don't have one go here and download it.

Dec 05, 2012 | 2006 Nissan Altima

1 Answer

2007 expidetion el driver seat reclined will not go back up


Did you remove or get access to the switch ?

Assume all vehicle fuses are good & there in
several places,if like my car

Without wiring diagrams your in trouble,as the
SRS (air bag system) has to be disabled & the
seat possibly removed

There are seat modules also, that have to be progammed,
if needing to be replaced.

Complex System,I have a Lincoln LS ,that has every one
of Ford most complex systems

Aug 03, 2012 | 2007 Ford Expedition Eddie Bauer EL

1 Answer

HONDA ACCORD Seats Front Assembly Recliner went down and won't go up


I wouldn't ruin anything by trying things yourself

I would have a dealer check it out

The dealer I used in the past, has a seat specialist come
in on Wed only, around 5:30 after the service bays close
& one service writer hangs out until that person fixes a
couple vehicles seat issues

Jun 12, 2012 | 1995 Honda Accord

1 Answer

My passenger seat is pushed all the way up the motor is fine because the seat reclines fine is there a manual lever to slide the seat back on a 2006 kia optima exv6


Theres no lever if you have power seats then it uses motors to control it, there are a few motors one for foward and back and then on to recline the seat and then depending on the options on the the seat there may be another to go up and down, just because it reclines doesnt mean the other motor is good, you will need to check the switch and then make sure that the wiring is connected under the seat, try to unplug it and then plug the connectors back in and see if that helps, if there was a lever it would be located in the front off the seat near the floor area, good day.

Apr 17, 2011 | 2006 Kia Optima

1 Answer

Front seat stays in the reclined postion..


The seat position is changed through the use of a cable that runs through a flexible tunnel, under the seat. In one case that I'm aware of, this cable got stuck around a projecting seat spring under the seat. When the seat was reclined and moved backward or forward, the cable caught on the seat spring and the seat had insufficient slack in the cable to release from the reclined position.

Jul 22, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5581 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...