Question about 1996 Cadillac DeVille

Open Question

The cot to replace an oilpump 1995 deville 4.9

Low oil pressure how much would it cost to replace the oil pumpon 1995 deville 4.9

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
localwonder
  • 6784 Answers

SOURCE: low oil pressure

Hi, you will need to inspect the oil pump screen. it is clogged. normally when the light illuminates at low idle, its because of a clogged oil pump screen. Here is a little description about this device.


Also known as an oil pickup tube, this strainer assembly in the inlet side of oil pump circuit screens out larger impurities and debris before they enter the pump. A finely woven mesh screen is on the sump end of the assembly, and the opposite end of the assembly either presses into or bolts to the oil pump.

  • The oil pump sump screen, or pickup, must be checked to be sure it is clean.
  • A new oil pump does not come with a new screen.
  • Some rebuilders replace every screen with a new one.
  • A plugged screen can ruin a new engine in a very short time.
To access most oil pump screens, the Engine Oil Pan must be removed.

Please rate and god bless:)

Posted on Apr 30, 2009

Ad
fknstart
  • 404 Answers

SOURCE: 96 DEVILLE

change oil

Posted on May 29, 2009

  • 1129 Answers

SOURCE: STOP ENGINE-LOW OIL PRESSURE LIGHT COMES ON AFTER INSTALLING NEW

The idle may be to low or the motor is just old and a new set of rod bearings is need with an oilpump to bring the pressure back up.

Posted on Jul 14, 2009

  • 1986 Answers

SOURCE: I keep getting a stop engine low oil pressure

Just wondering if you put in the correct amount of oil and tightened everything back up properly...

Posted on Sep 09, 2009

240SXer
  • 100 Answers

SOURCE: location of oil pressure switch on a 1997 cadillac deville

Oil pressure switches a normally located by or near the oil filter on all cars. :-)

Posted on Dec 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What should i see when looking at my oil gage


If you have a needle display, the dial has to be in the middle or higher. The low side will mean you are not getting enough RPM at idle or if low when above 20MPH the oil level is low or you have a bad oilpump or bearings.

In rare occasions, diluted oil will show low and can fail to lubricate the engine due to contamination. You need to act quickly to change the oil and filter when this happens.

A warning light for low pressure will glow if you do not have a needle gauge.

Jun 01, 2012 | 1995 GMC Sierra

2 Answers

Oil engine light blinks on and off when the engine is idling. What can cause this?


This is an indication of low oil pressure. Either the oil level is too low and you need to add oil to the full line on the dip stick or you have a real oil pressure problem and need to have the problem diagnosed by a certified mechnic.
Let me know if you have any other comments or questions. Thanks.

Jul 05, 2011 | 2006 Mitsubishi Galant

2 Answers

The oil pressure indicator light came on and flashed and a ding sound then it said "STOP" turn off engine. Not sure what is wrong. Oil level is ok.


it can be that your oilpump is packing up or your oil switch is faulty.the best bet is to do a oil presure test to check oilpump then you can work from there

Apr 23, 2011 | 2002 Volkswagen Passat

1 Answer

I have a 86 ford f-250 w/ a carbed 460.no fuel to carb. was told i had very low oil pressure.would changing oilpump and assending unit fix my propblem? do i have to pull motor to change oilpump? what...


If you're not getting fuel to the carburetor, check/change your fuel filter, check the fuel pump. And for the oil pressure you can change the oil pressure sending unit to see if thats the problem, for the oil pump the oil pan has to come off, it can be changed without pulling the engine, however you still have to lift the engine up.

Feb 16, 2011 | Ford F-250 Cars & Trucks

1 Answer

My 1998 caddilac deville low oil pressure light on


the low oil pressure light can be a faulty oil pressure sensor.But mostly its the pump itself. open the oil pan and check if the net is chocked if not then replace the oil pump and do install the new o ring supplied with the pump. And try changing the oil on time and a good brand is important. (if the problem still exists then u need to replace the crank barring and the cam bushings..Just kidding).

May 19, 2010 | Cars & Trucks

1 Answer

Oil level light comes on inthe afternoon on 1995 cadillac 4.9 when coming to astop


assuming your oil is full and you have changed the oil regularly the light is telling you you have low oil pressure

untreated this will lead to engine failure

if you are lucky, its just an oil pressure switch issue

that being said... check you oil level and/or change your oil and see what happens


May 03, 2010 | 1995 Cadillac DeVille

3 Answers

Im getting low oil pressure reading on my 95 cadillac deville.. what should I be looking to replace?


always start at the least expensive item. ths would be the oil filter. if its a double wall one,switch to a single. if this doesnt work,then test the oil sending unit. alot of the older caddys do this,and as long as you dont hear lifters tapping,i wouldnt sweat it.

Apr 29, 2010 | 1995 Cadillac DeVille

3 Answers

STOP ENGINE-LOW OIL PRESSURE LIGHT COMES ON AFTER INSTALLING NEW


The idle may be to low or the motor is just old and a new set of rod bearings is need with an oilpump to bring the pressure back up.

Jul 14, 2009 | 1996 Cadillac DeVille

2 Answers

Need to replace oilpump is it hard/?????


well it involves dropping the sump and i dont recomand a novice do it

Jul 13, 2009 | 1991 Dodge Ram 350

Not finding what you are looking for?
1996 Cadillac DeVille Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...