Question about 1999 Dodge Dakota

1 Answer

My brakes are grinding/vibrating only on the passenger side. only happens between 0-45 mph and quits when i press on the brakes to slow myself. the dust plate is not in the way i blead the lines

Posted by on

  • Anonymous May 22, 2009

    thank you vinteretpoij! you were very helpful that was everything i needed to know



  • Dar
    Dar May 11, 2010

    Are these new brakes?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 36 Answers

The most likely cause for your brakes grinding, especially on one side, would be a warped rotor. As the wheel spins this warped rotor is making contact with the pads. As you apply pressure the pads make full contact with the rotor causing the noise to stop. The pads may also be bad. Too much heat will cause the rotor to warp. Your best bet would be to replace both the pads and the rotor as either of them can be causing the problem. I do NOT recommend changing just one side of your brakes as this causes uneven braking and is ultimately dangerous.

Posted on May 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

ES Lancer - vibration, dull grinding noise when turning right, even at low speeds. Intensifies as I approach 30+mph. Replaced CV Axle, Tie Rod End, Bearing, and Hub. No dice.


Turning right and having a loader noise, means the left/drivers side is bad. Turn right, more pressure on the left side. and vice versa.

Aug 09, 2015 | 2003 Mitsubishi Lancer

2 Answers

1991 GMC Jimmy has vibration at around 50 MPH.


get your tires checked definitly sounds like a balance problem could be a bent rim also

Apr 06, 2015 | 1991 GMC S-15 Jimmy

1 Answer

What could cause metal on metal grinding at 40 mph and above on '96 Pathfinder?


First thing is to check the brakes, especially the condition of the pads, and if you have worn right through them, the condition of the calipers, and finally the rotors. Sounds like one of these old the key.
In any case can you get back to us with the solution so that others can be helped in the future, thanks.

Jul 10, 2014 | 1996 Nissan Pathfinder

1 Answer

1999 gmc jimmy front passenger side grinding noise


bad u-joint would be the first thing to look for if the sound is coming from just one side. when you engage the front axle, you put it under load and it shuts up.

Mar 21, 2013 | 1999 GMC Jimmy

1 Answer

Ford Explorer 2002 grinding and vibration under 60 mph


you have wheel bearings failing
the random abs light is the rotor for the sensor touching the sensor head because the wheels are loose on the shaft

Apr 15, 2017 | 2002 Ford Explorer

1 Answer

Brakes- one side pulls more than other


replace calipers and bleed the system

May 07, 2012 | 2008 Dodge Durango Limited

1 Answer

Vibration/Rattling on right side during high speeds


I had a similar problem. The dealer change automatic transmission and differential, but the noise continu. After research on internet i think the problem is the front galiper who create a vibration on the disc wheel and the vibration frequence follow the front axle until interior car. Just press slowly the brake pedal and if the noise stop , that's it the cause i think. I dont change my galiper, but i have a new transmission . :)))

Jun 03, 2009 | 2002 Volkswagen Jetta TDI

1 Answer

'98 corolla deceleration problem


brake hose could be bad or this is normal for engine to brake vehicle all autos do this it is called engine braking it is normal. if your brakes are wearing uneven then i would suggest a brake hose on the passenger side.

Apr 27, 2009 | 1998 Toyota Corolla

1 Answer

95 ford explorer, grinding noise/vibration at slow speeds.


CHECK YOUR UNIVERSAILS COULD BE WORN OR DRY U NEED TO PULL OUT THE SHAFT TO CHECK PROPLEY CHECK FOR STIFFNESS AND NOTCHEY MOVEMENT

Dec 16, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
1999 Dodge Dakota Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...