Question about 1999 Chrysler Sebring

Open Question

Error code p1768 on a sebring 1999 - 1999 Chrysler Sebring

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not start with out ,the code reader plugged in unplug the code reader and will stop gettig code p1768 and p0001


P0001 OBD-II Trouble Code: Fuel Volume Regulator Control Circuit/Open
Symptoms of a P0001 DTC will include MIL (Malfunction indicator lamp) illumination, although there may be other symptoms
If you get this DTC, you may want to try reading the codes using another (if possible) higher quality code reader. Even clear the code and see if the code comes back. This code is not common and sometimes is shown in error due to the design of the code reader (e.g. the code reader function is a secondary function of a tuner device).
P1768
Now with the code you said you had, P01768. DTC P1768 will set when TCM senses less than 3 volts at transmission control relay output (switched battery) terminals at TCM, prior to TCM energizing relay
Possible Cause
" Low battery voltage.
" Open fused B+ circuit to transmission control relay.
" Open ground circuit.
" Transmission control relay output circuit shorted to ground.
" Open transmission control relay circuit.
" Defective transmission control relay.
" Malfunctioning TCM. (very rare)

Sep 13, 2016 | 1999 Plymouth Voyager

1 Answer

Code 41 for a 1999 chrysler sebring jx convertable 6 cyl 2.5


No vehicle after 1995 has a code like that

PO40 & PO41

Google OBD2 Codes P0 40

Mar 03, 2013 | 1999 Chrysler Sebring

1 Answer

What is a P1768 error code on honda accord 2000 model


just google honda DTC code P1768. you will get lot's of answers

Jul 27, 2011 | Honda Accord Cars & Trucks

1 Answer

REPLACE RELY FOR FUEL PUMP DROVE CAR DOWN STREET ENG LIGHT CAME ON CODE P1768 CAME UP BUT DID NOT HAVE ANY PROBLIM BEFORE CAR WONT GO OVER 60 MILES CAN YOU HELP


When the light comes on while driving does it shift funny?
You may only need a TCR (transmission Control relay).
and it is also likely a wiring issue to the tcm or the tcm relay, check the speed sensors as well, I've fixed 100's of those at the dealer!

Jul 08, 2011 | 1998 Chrysler Sebring

3 Answers

I have a 1999 grand cherokee. The check engine light came on with a P1768 code. If I keep the trans in the "drive" position and start off, it feels like the transmission is in 3rd gear. No...


Hi, Your like your jeep is in limp in mode, this is to keep you from burning up transmission and to get you some were off the road, the p1768 code means A/T Transmission Relay Output Always Off. This should be checked out by your local shop or dealer. but you should make sure that the fluid level is correct, if to low there is not enough fluid pressure for the solenoid's to engage the relays. Hope this can help you out. If i can help you anymore fell free to re post.
Thanks dodge tec

Jan 01, 2011 | 1999 Jeep Grand Cherokee

1 Answer

My 1999 dodge intrepid is stuck in low gear code p1768 is what i am looking for


Dodge: Relay always off (relays are stuck open) Dodge: Relay always off (relays are stuck open) Dodge: Relay always off (relays are stuck open) Dodge: Relay always off (relays are stuck open) Dodge: Relay always off (relays are stuck open) Dodge: Relay always off (relays are stuck open) Dodge: Relay always off (relays are stuck open) Dodge: Relay always off (relays are stuck open)
P1768 TCM (tranny control module) relay output always off
Okay what it means is that the PCM (engine computer) is not seeing the relay for the TCM
turn on. Can be as simple as a new relay, should be in the fuse panel next to the battery under the hood, switch if you can with another identical relay and see if it makes any difference, If it doesn't then you probaly have a broken wire somewhere in the harness between the PCM/fusebox area on the drivers side .

Apr 14, 2010 | 1999 Dodge Intrepid

1 Answer

I am trying to find out where the transmission relay circuit is on my 1999 jeep grand cherokee limited. also what does code P1768 stand for and how do I solve this problem?


About Jeep Grand Cherokee 1999-2004, also called WJ, you must review this information, is in spanish language, but can hel yo:
- Jeep-WJ-2002-Cherokee-Service-Manual-PDF-08W-Diagrama-de-Cableado
* Electrical Distribution Center in 8W 10-2 Page 24 / Transmission Relay
* Trasmission Relay Descriiption in 8W 10-8 Page 30 / Diesel & Gas
* Control Transmission System in 8W 31 Page 167 and next.

Hope this help you.

Aug 06, 2009 | 1993 Jeep Grand Cherokee

1 Answer

CHRYSLER CONCORDE WITH DIAGNOSTIC CODES P1768 AND P1792


P1768 MEAN TRANSMISSION RELAY ALWAYS OFF..WAS UNABLE TO FIND P1792..IF PROBLEM STARTED AFTER HEADS WERE DONE..LOOK CLOSELY AT AT ENGINE MAIN WIRING CONNECTORS AND GROUND CONNECTIONS THAT ARE ON ENGINE..LOOK FOR GROUND EYELETS NOT SECURED OR LOOSE..LOOK FOR ANY PINCHED WIRING AS WELL..MAKE SURE NO SPREAD TERMINALS IN CONNECTORS AS WELL..YOU CAN ALSO TRY SWAPPING ANOTHER RELAY IN PLACE OF TRANS CONTROL RELAY..MAKE SURE PART NUMBERS MATCH UP..
TCM(NGC)PIN 16 IS TRS T3 SENSE CIRCUIT..PIN 17 IS NOT USED...HAS TO DO WITH TRANS RANGE SENSOR..I DON'T THINK THIS CAUSING YOUR PROBLEM..

Jul 30, 2009 | Chrysler 300M Cars & Trucks

Not finding what you are looking for?
1999 Chrysler Sebring Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...