Question about 1991 Ford F150

Open Question

Ford f150 keeps blowing front transmission seal

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: QUESTION ON A 1992 FORD F150 SUPERCAB TRANSMISSION

There is only 1e40d for all 5.8 windsor transmissions ,so I got a used one off a van. Auto zone is wrong by offering 2 types, one for the supercab and 1 for the regular.

Posted on Jun 02, 2008

Ad
leetamara
  • 702 Answers

SOURCE: Front Main Seal is blown on the Transmission

You have to remove the transmission, remove the torque converter to access the seal. Most likely the bushing behind the seal is worn out allowing fluid to leak past the seal. After the trans. is out, take it to a trans. shop. It requires a special tool to change the bushing. Seems like a bunch of work for $10.00 in parts. The rear main seal requires pulling the pan to access it. When the trans. is out, this is the time to replace the rear main seal on the engine.

Posted on Jun 11, 2008

  • 1 Answer

SOURCE: # 15 fuse keeps blowing on a Ford f150 2003 model

try a #20 amp fuse

Posted on Apr 23, 2009

  • 3 Answers

SOURCE: I have a 2002 Ford F150. Fuse 15 (5 Amp) keeps blowing.

replace nuetral safty switch for gear shifter and check window relays

Posted on Feb 12, 2010

  • 158 Answers

SOURCE: transmission control solenoid location for 96 ford f150

whether it is the smaller (4R70w) or the bigger (E4OD), the solenoids are under the pan. The E4OD solenoids are in one big block where the other trans has them seperated

Posted on Aug 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 ford f150 front @back seal leak


Two separate fixes, suggest the first as you can do both easier. Drop drive shaft and starter and remove transmission. The front pump assembly will have to be removed from the transmission and the front bushing and seal can be accessed and replaced. inspect the input shaft to the torque converter to make sure there is no wear. That's on the area where the bushing rides. You can do the same with the rear bushing and seal and output shaft. While you are at it remove the pan and replace the filter. A mess at best but it would be highly advisable.

Aug 23, 2014 | Ford F-150 Cars & Trucks

1 Answer

REBUILT e4od KEEPS BLOWING FRONT SEAL. WHATS CAUSING IT?


YOU COULD HAVE A BAD SEAT WERE THE SEAL GOES INTO MAKE SURE THERE IS NO GROOVES OR CRACKS THERE

May 12, 2014 | 1994 Ford F150 Styleside Supercab

1 Answer

Replace front seal transmission


Hey Justin, get your information straight and don't describe the wronr R&R proceedures for removing a transmussion on a ford crown vic as they are real wheel drive.

Dec 22, 2013 | Ford Crown Victoria Cars & Trucks

1 Answer

My 1990 ford f150 aod transmission won't shift from 2nd to 3rd


Assuming it is full of fluid, normally I would say its a pressure problem inside the trans. But is it possible the shift linkage is not back together correctly ??

Jul 28, 2012 | 1990 Ford F150

1 Answer

Is there a seal that i need to replace if i remove the front driveshaft on a 2001 ford f150 supercrew


There is a seal in the back of the transmission where the driveshaft goes into the transmission. If it isn't leaking it doesn't have to be replaced. You may want to replace it as a preventative measure but you will need to be able to pull it out and have the proper seal driver to install the new one.

Jun 24, 2011 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Can i change front transmission seal on 1997 F 150 without going inside transmission?


If it is the shaft seal on the torque converter, you don't have to open up the case, You will probably have to replace the torque converter, once the seal digs in like that and starts to leak, it cuts a path deep enough to where it can't be fixed. Hope this helps.

Mar 23, 2010 | 1997 Ford F150 Regular Cab

2 Answers

I have a transmission fluid leak on my 1995 ford F150, 4x4. What are the possible places it could be leaking from?


It could be leaking from the pan, the dipstick where it goes into the transmission, or the front or rear seals on the transmission.

Jun 22, 2009 | 1995 Ford F150 Styleside Regular Cab

1 Answer

Rear passenger side axle keeps blowing out the seal


probably bearing now!! I would call dealer on this one that is unusual you might be surprised have vin# ready ask if there was a call back on this! good luck

Dec 31, 2008 | 2004 Ford F150

Not finding what you are looking for?
1991 Ford F150 Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...