Question about Renault Clio

Open Question

Rear view mirror mounting

The mounting for my Clio estate rear view mirror is working loose. Can't work out how to fix it.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 740 Answers

SOURCE: Rear view mirror bumped and fell off - how do I reinstall?

Go to Auto Zone or any other auto place and buy some rear-view mirror adhesive its a kit with a cleaner and a clear glue it Works will re-attach mirror. Good Luck

Posted on Dec 27, 2008

frcs68
  • 1605 Answers

SOURCE: Reattach rear view mirror

there is a small alan screw in the base of the backup mirror. loose it and slide the mirror back on to teh base on the windshield and tighten down the alan screw.

Posted on May 13, 2009

  • 1986 Answers

SOURCE: How do you remove the rear view mirror from mount.

Is the mount made of metal or plastic? In either case, it will be attached to a "base" that is glued to the windshield. A metal mount should have a tiny little screw in it that pins it against the base. Loosen this crew and the mount should slide upwards (towards roof) off the base. A plastic mount should have a tab that you can pull on and slide it off upwards....

Posted on Aug 12, 2009

Testimonial: "Exactly what we thought was the correct way. But they found that the previous owner had also glued the mirror stem to the mount. "

FixinFax
  • 3085 Answers

SOURCE: 2004 vw beetle conv interior rear view mirror is loose

No, the mirror is just a friction fit. You will need a new mirror.

Posted on Sep 17, 2009

Testimonial: "thanks"

alicantecoli
  • 22095 Answers

SOURCE: drivers outside rear view mirror is loose in the mount

look under the covers and their is either a screw or a bolt that will tighten the spring loaded cups

Posted on Jul 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I tighten my loose inside rear view mirror?


I don't think you can. You just have to replace it.

Jun 24, 2015 | 1995 Toyota Corolla

1 Answer

How do I fix the loose internal rear view mirror on a ford explorer? It's drooping after I adjust it each time.


if you look in the area were the mirror arm attaches to mount on the window you will see a holding screw that is probably loose and needs to be snugged up.

Aug 18, 2014 | 2002 Ford Explorer

1 Answer

Loose rear view mirror


nope....the mirror mounts on the arm like a ball and socket for movement. one of them is worn out...

Jan 18, 2013 | 1995 Lexus LS 400

1 Answer

How to replace rear view mirror on 98 buick century


Most cars have the rear-view mirror and the little metal mount that it slides into. If the whole thing has fell off it is an easy fix.
Go to an auto parts place and tell the counter person you need the glue to glue your mirror mount to the windshield. They will know what to give you.
Then you clean the spot the mirror was hung with alcohol. Let dry
Then follow package directions. Basically you do a dab of glue on mount and press to windshield and hold for a bit of time. Then you wait like 12-24 hrs before sliding the mirror onto the mount.

On the other hand if you are asking for a new mirror you can get one from the Buick dealership - parts dept. or a junkyard or just attach any kind of rear-view mirror. Sorry I can't help you if you have a wired mirror.

May 13, 2012 | 1998 Buick Century

1 Answer

Drivers outside rear view mirror is loose in the mount


look under the covers and their is either a screw or a bolt that will tighten the spring loaded cups

Jul 17, 2010 | 2000 Dodge Caravan

1 Answer

Need a diagram for installing a drivers side electric power mirror on a 1995 mercury villager van


here's 1996, all I have. Please rate.

Mirror, Power — Outside Rear View NOTE: This procedure applies to both RH and LH power outside rear view mirrors.

Removal
  1. Remove the front door trim panel (23942). Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws and the outside rear view mirror mounting hole cover (17K709) from the front door (20124).




  1. Remove the wire clip.
  1. Disconnect the power outside rear view mirror electrical connector.




  1. Remove the three power outside rear view mirror bolts and the power outside rear view mirror.




Installation
To install, reverse the removal procedure. Tighten the three power outside rear view mirror bolts to 3-4 Nm (27-35 lb-in). Glass, Outside Mirror
Removal and Installation
Refer to the glass replacement procedures in Manual Mirror for power outside rear view mirror glass (17K707) Trim Cover
Removal
  1. Remove the front door trim panel. Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws.


    Remove the outside rear view mirror mounting hole cover.
Installation
To install, reverse the removal procedure. Mirror Control
Removal
  1. Use a small flat-blade screwdriver to pry the power outside rear view mirror control switch from the instrument panel (04320).


May 13, 2010 | 1995 Mercury Villager

1 Answer

How do i replace left door mirior


remove trim panel, remove mirror fasteners.

Glass, Outside Mirror—Town Car

Removal and Installation
  1. Push upper edge of outside rear view mirror glass (17K707) into the outside rear view mirror to expose latch release.
  1. Using a small flat-bladed screw driver or equivalent, move latch release to released position.
  1. Remove outside rear view mirror glass mounting back and outside rear view mirror glass from outside rear view mirror.
  1. Disconnect heater wire connectors and auto dimmer connector, if equipped.
  1. To install reverse Removal procedure.
------------------------------------------------------------
Mirror, Power—Outside Rear View
Town Car

Removal and Installation
  1. Disconnect battery ground cable (14301). Refer to Section 14-01 .
  1. Remove front door trim panel (23942). Refer to Section 01-05 .
Trim Panels, Door Front—Town Car
Removal
  1. Snap out two door pull strap retaining screw covers. Remove screws.
  1. Remove three screws on front and rear side and center of front door trim panel (23942).
  1. NOTE: The following procedure must be used during removal and installation of the door armrest and trim panel. Refer to the appropriate illustrations for component and vehicle model identification.

    Using the Trim Pad Removing Tool from Rotunda Windshield and Moulding/Trim Removal Kit 107-R0401 or equivalent, pry the trim panel retaining clips from the door inner panel.
  1. NOTE: Do not use front door trim panel to remove trim clips from door inner panel. Replace any bent, damaged or missing push pins.

    Remove window regulator control switch housing from front door trim panel. Lift up housing in front and disconnect all connectors.
  1. Disconnect wiring harness and heated seat switch electrical connectors if equipped.
  1. Remove the door trim panel.
  1. Disconnect two electrical connectors.
  1. Remove nut from outside rear view mirror mounting base.
  1. Swing outside rear view mirror (17682) toward driver door window glass to expose screw in mount base.
  1. Remove screw from outside rear view mirror base.
  1. Remove outside rear view mirror from front door (20124). Guide wiring and connectors through hole in front door.
  1. To install, reverse Removal procedure. Tighten nuts to 8-10 Nm (71-88 lb-

Nov 05, 2009 | 1996 Lincoln Town Car

1 Answer

Reattach rear view mirror


there is a small alan screw in the base of the backup mirror. loose it and slide the mirror back on to teh base on the windshield and tighten down the alan screw.

May 12, 2009 | 1994 BMW 3 Series

1 Answer

Sideview mirror assembly removal


  1. Remove the front door trim panel (23942) ; refer to Section 501-05 .
    • Peel back the watershield.
  1. Remove the rear view mirror mounting hole cover (17K709).
5d2b410.gif
  1. Disconnect the power mirror electrical connector.
0ea0125.gif
  1. Remove the outside rear view mirror (17682).
    1. Remove the screws.
    1. Remove the outside rear view mirror.
89dafc2.gif
please rate as fixya if this works for you.

Mar 03, 2009 | 1998 Ford Escort

1 Answer

Rear view mirror bumped and fell off - how do I reinstall?


Go to Auto Zone or any other auto place and buy some rear-view mirror adhesive its a kit with a cleaner and a clear glue it Works will re-attach mirror. Good Luck

Dec 27, 2008 | 1995 Nissan Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

xxxxxx xxx

Level 3 Expert

4834 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...