Question about 1996 Isuzu Oasis

Open Question

96 ISUZU OASIS,HARMONIC BALANCER.WHAT IS THE PART THAT HOLDS IT IN PLACE?WHERE CAN I PURCHASE IT?

1996 ISUZU OASIS,HARMONIC BALANCER NEEDS PIN OR COTTER TYPE PIN THAT HOLDS IT IN PLACE,WHERE WOULD I FIND IT? OR WHAT IS IT CALLED?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76109 Answers

SOURCE: how do i torque a

Use a cross pattern and follow torque specs recommened in service manual, don't over tighten!

Posted on Jul 17, 2008

Ad
  • 54 Answers

SOURCE: 96 isuzu oasis timing belt replacement

You dont have to remove the pulley to take out the timing belt. You can use a 1/4th inch ratchet to pull the pulley. Then the belt will come out

Posted on Dec 03, 2008

  • 87 Answers

SOURCE: Harmonic balancer bolt direction for loosening??

CCW , and your going to at least put the new timing belt on and balance to check for compression. you can run an engine without the covers installed or accessories hooked up

Posted on Feb 07, 2009

  • 5 Answers

SOURCE: is the bolt on the harmonic balancer on a 1995 isuzu rodeo 6 cyl.

i just replaced mine and it loosen to the left...so you will need a impact and atleast 1/2" drive and 140 to 180 psi to break it free

Posted on May 31, 2009

BCAS1298
  • 3092 Answers

SOURCE: Is there a special tool to get off the engine

Autozone rents this tool out, Harmonic balancer puller.

Posted on May 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove harmonic balancer Isuzu trooper 1996


counter clockwise. if you don't have an impact wrench, watch this video.

Dec 14, 2014 | Isuzu Cars & Trucks

1 Answer

I need the location of the harmonic balancer on my 2.2l Ecotec engine. Car is 2004 Chevrolet Cavalier LS.


CRANKSHAFT PULLEY IS THE HARMONIC BALANCER.YOU NEED THESE TOOLS TO REMOVE HARMONIC BALANCER, YOU NEED HARMONIC BALANCER REMOVER AND INSTALLER TOOL.YOU NEED A LARGE PIN SPANNER WRENCH TO HOLD HARMONIC BALANCER IN PLACE WHILE LOOSEN THE HARMONIC BALANCER BOLT.

May 21, 2011 | Chevrolet Cavalier Cars & Trucks

2 Answers

Is it right or left hand thread on harmonic balancer (1996 rodeo)


The harmonic balancer should loosen in the CCW direction. Turn the bolt to counter clock wise direction.To tighten the bolt turn in clock wise direction. -------------- This should help.Thanks.Helpmech.

Apr 06, 2011 | 1996 Isuzu Rodeo

1 Answer

I need to chance the crank sensor on a '96 buick park ave. 3800 v-6, what am i going to have to take off to do it ?


Passenger tire, passenger inner well cover, serpentine belt, pulley that attaches to harmonic balancer , nut for harmonic balancer, then harmonic balancer. Sensor is screwed to engine. Disconnect battery prior to and before install of sensor. The 3800 has a special balancer puller designed just for it, not sure were you could rent one it is a specalty tool.

Mar 19, 2010 | 1996 Buick Park Avenue

2 Answers

How to remove the harmonic balancer pulley on a '96 dodge caravan 3/0L?


i have a 1998 caravan my harmonic balancer fell off my qquestion is is there 2 separate keys that hold on the timing gear and the balancer pulley on, i have been to the dodge dealer and they printed me out pics but i still don't know for sure if the timing gear has it's own key or there is just 1 long key that holds both the timing gear and the balancer ......PLEASE HELP

Nov 22, 2009 | 1996 Dodge Caravan

1 Answer

Cannot remove harmonic balancer bolt on 96 honda (2.2L)


You may need an impact gun. If loctite was used, you will need a gun.

Sep 13, 2009 | 1996 Honda Accord

1 Answer

Harmonic balancer is going out! do you have to pull the motor ?


No. The balancer can be pulled off from the crank with no problem. It's the main pulley on the engine. It has a big bolt at the center that holds the pulley onto the crank, that bolt needs to come off. Then the pulley (harmonic balancer) can come off.

Sep 09, 2009 | 1992 Oldsmobile Cutlass Ciera

2 Answers

Do i need a special tool to take the harmonic balancer off


not really special, but, you need a harmonic balancer pulley removing tool...Lots of larger parts store either loan them out or rent them. (if you buy one you may get to use it again in five years,unless you are a tech.) Why are you taking it off?

May 27, 2009 | 1992 Honda Accord

1 Answer

Harmonic balancer bolt direction for loosening??


CCW , and your going to at least put the new timing belt on and balance to check for compression. you can run an engine without the covers installed or accessories hooked up

Feb 05, 2009 | 1996 Isuzu Rodeo

Not finding what you are looking for?
1996 Isuzu Oasis Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...