Question about 2004 Mercury Grand Marquis

Open Question

Turns over but wont start 2004 mercury grand marque

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: 2004 Mercury Grand Marque LS

mass air flow sensor or throttle position sensor defective

Posted on Aug 03, 2008

warlock61
  • 659 Answers

SOURCE: 1999 mercury Grand Marques car won't idle

it sounds like the idle control valve is sticking. it is located at the throttlebody where the air inlet is. try tapping the valve to see if the idle is ok if so the valve should be replaced

Posted on Nov 24, 2008

  • 14036 Answers

SOURCE: Code P401 on mercury Grand Marque. EGR valve

COULD BE THE EGR VALVE PORT HOLE IN THE INTAKE MANIFOLD IT COULD HAVE CARBON BUILT UP BLOCKING THE HOLE CLEAN IT A SMALL WIRE OR SCREW DRIVER.

Posted on May 05, 2010

  • 395 Answers

SOURCE: 2004 mercury mountaineer wont start will turn over not crank

the igintion switch is bad

Posted on May 20, 2010

  • 116 Answers

SOURCE: Need to find the computer module with the factory

the code is usually found on stickers on the trunk hinges. if not remove the drivers door panel, the code is on the module that is in the door. use that code to access all functions including setting your own code.

Posted on Sep 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of fuse box for 2002 Mercury Grand Marque


usually located on left side under the dash by your left leg

Feb 27, 2013 | 2004 Mercury Mountaineer

1 Answer

2004 mercury grand marque check engine light on code is p0108 says map sensor or vacum leak but does not have leaks.this car does not have map sensor what else needs to be replaced


PO 108 --- Baro/Map Sensor High Voltage Detected

Yes it does

It is integrated into one unit in the ESM EGR assembly
(possibly)

I have no experience with that,so if you find only an egr valve
& no other sensor with vacuum hoses & wires going to it,replace
the egr valve.

Getting the feeling you missed it

Work the web sites. Put in your motor & EMS Module for egr
& see what comes up

Sep 21, 2011 | 2004 Mercury Grand Marquis

1 Answer

Where can I find a digram of the fireing order for a 1997 Grand Marque?


start here, and choose the size engine you have.

http://autorepair.about.com/library/firing_orders/bl-mercury-firing-97.htm

Apr 14, 2011 | 1997 Mercury Grand Marquis

1 Answer

Hi -\r\n2007 Grand Marque Auto trans stuck in Park. Wont move to gear. Case study: Just have remoate start put in, Steering wheel is easy to turn, car starts, Back lights operate (Except 1 bulb in third...


Check brake light switch behind brake pedal remote start has to be wired into switch so vehicle will shut down when brake is depressed when put into gear without ignition switch turned on. possible bad connection on switch or wires are not attached.

Nov 27, 2010 | 2007 Mercury Grand Marquis GS Sedan

2 Answers

98 Merc grand marques on cold start engine makes loud hammer tapp


Do you have the defrost on when it is doing this? Turn it off and see if it goes away. I'm still thinking A/C compressor.

Mar 30, 2010 | 1998 Mercury Grand Marquis

1 Answer

1996 mercury grand marque wont start after bottoming out


rest your inertia switch in the trunk. It shut off your fuel pump for safety. Your owner manual will tell you where it is and how to reset. Look for yellow & black deacl and then press button on siwtch. It should start immediately.
report back and please rate as solved if htis fixes your issue.

Mar 24, 2009 | 1996 Mercury Grand Marquis

1 Answer

I have a 2002 Grand Marque: fuel starvation during starting


TRY RUNNING A BETTER GRADE OF GAS ALONG WITH 2 BOTTLES OF FUEL INJECTOR CLEANER FOR 2 TANKS OF GAS.

Mar 07, 2009 | 1992 Mercury Grand Marquis

1 Answer

Curse control on 2004 mercury grand marque does not work.


the most common cause of this problem is the clock-spring rotating contact under the steering wheel, it has an open circuit in the circuit ribbon.

Dec 09, 2008 | 2004 Mercury Grand Marquis

Not finding what you are looking for?
2004 Mercury Grand Marquis Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

fordexpert

Level 3 Expert

5471 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...