Question about 1994 Oldsmobile 88

Open Question

Size of alternator bolts - 1994 Oldsmobile 88

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What size is the alternator tensioner bolt for a 1996 isuzu trooper and where could I find this bolt?

depend on motor size but any hardcast bolt with lockn nut should work... ace hardware or lowes has a isle of harded cast bolts and nuts

Mar 02, 2015 | 1996 Isuzu Trooper

1 Answer

Upper alternator bolt size

lexus is200 radio has stopped working

Jan 27, 2014 | Honda CR-V Cars & Trucks

1 Answer

Alternator bolt size

the head size for socket size or actual bolt spec.?
you lost the bolt (not stated) or just want to unscrew it?

I'll'' guess at lost.
its metric.
and is 6mm or 8mm ? in size. (i bet 8)
buy some 6 and 8s in the store and see if one fits.
if one fits , you now know the diameter in mm and the pitch.
now buy the correct length (use a ruler)

Jan 27, 2014 | Honda CR-V Cars & Trucks

1 Answer

1999 elantra alternator bolt

12mm 175 thread will do the trick

Nov 30, 2013 | Hyundai Cars & Trucks

1 Answer

Bolts for the alternator

Go the auto parts store and they can either pull it up or they can let you use a thread gauge to tell you the threads and size.

Apr 10, 2010 | 1994 Mazda 323

1 Answer

My 2003 Hyundai Tiburon is missing a bolt in the alternator adjustment bracket. What size bolt do I need?

alternator bolts can be 13 mm 14 mm 15mm.your best bet is to go to dealership.they can look up the bolt and size you need.

Dec 10, 2009 | 2003 Hyundai Tiburon

1 Answer

How to replace alternator for a 1995 mazda mvp

Don't know your engine size so pick the appropriate one:

MPV Models 2.6L ENGINE
Fig. 2: Alternator installation — 2.6L engine
  1. Disconnect the negative battery cable.
  2. Tag and disconnect the wire and connector from the alternator.
  3. Remove the drive belt.
  4. Remove the support mounting bolt and nut.
  5. Remove the alternator assembly. To install:
  6. Position the alternator assembly against the engine and install the support bolt.
  7. Install the adjusting strap mounting bolt.
  8. Install and adjust the alternator belt.
  9. Tighten the support mounting bolt to 28–38 ft. lbs. (38–51 Nm), and the adjusting bolt to 14–18 ft. lbs. (19–25 Nm).
  10. Connect all alternator terminals.
  11. Connect the negative battery cable.

Oct 06, 2009 | 1995 Mazda MPV

2 Answers

Replace alternator

This is for both size engines since you didn't list the motor size......

  1. Disconnect the negative battery cable.
  2. Remove air intake resonators.
  3. Remove the air cleaner-to-throttle body tube and the mass airflow sensor.
  4. Unplug the connectors and remove the cables from the alternator.
  5. Raise and support the vehicle.
  6. Release the drive belt tensioner and remove the drive belt from around the alternator. NOTE: It is not necessary to remove the drive belt from the engine.
  7. Remove the alternator mounting bracket bolts and remove the mounting bracket.
  8. Lower the vehicle.
  9. Remove the power steering pressure hose bracket retaining nut and bolt and remove the bracket with the hose from the engine lifting eye.
  10. Remove the alternator mounting bolts and remove the alternator from the vehicle. To install:
  11. Place the alternator into position and install the mounting bolts finger tight.
  12. Install the power steering hose bracket and tighten the retaining nut and bolt to 70–106 inch lbs. (8–12 Nm).
  13. Raise and support the vehicle.
  14. Install the alternator mounting bracket and retaining bolts and tighten to 15–22 ft. lbs. (20–30 Nm).
  15. Release the drive belt tensioner and install the drive belt pulley over the alternator pulley.
  16. Lower the vehicle.
  17. Tighten the alternator mounting bolts to 15–22 ft. lbs. (20–30 Nm).
  18. Install the alternator connectors and the cables. Tighten the terminal nut to 80–97 inch lbs. (9–11 Nm).
  19. Install the air cleaner-to-throttle body tube, mass airflow sensor, and the air intake resonators.
  20. Connect the negative battery cable.

Apr 01, 2009 | 1999 Mercury Mystique

1 Answer

Need Alternator Bracket bolt

go to dealer or junk yard

Jan 23, 2009 | 2003 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides