Question about Dodge Ram 1500

2 Answers

Turn signals not working

Turn signal works. when the truck is not running and I turn the left turn signal on every thing is fine. When the truck is on the lights work but a lamp out is on and blinking when left turn signal is on. All bulbs are working but they blink fast. Not sure where to start?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 2,899 Answers

The turn signal bulbs are dual filament bulbs, so if it appears to be on it's the other filament, replace the bulb.

Posted on Apr 20, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Dodge Master
  • 1,449 Answers

You must fit a matching set of bulbs front and rear check the bulb contacts may need cleaned.

Posted on Dec 26, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: Chevy Cavalier 2001 turn signal blinks fast

If new bulbs don't work, it is probably the harness that holds the bulb. I had to replace both on my car after fighting with the problem for over a year and not knowing.

Posted on Mar 19, 2009

  • 1201 Answers

SOURCE: Turn signal blinks too fast

Try changing the flasher, it's in the fuse box, round in shape, and either blue or silver in color.The 4 way flasher is the same shape, to be sure you get the right one, put the left signal on and put your finger on it, if you feel it clicking, you have the right one.

Posted on Apr 02, 2009

  • 1779 Answers

SOURCE: 1998 ford taurus left turn signal blinking fast

Replace the bulb that stays on and doesn't blink, if that doesn't solve the problem, let me know.

Posted on Apr 13, 2009

ourhowse
  • 2007 Answers

SOURCE: 2005 Canyon turn signal problem

No, but that's probably where your problem is. The wires get the hell beat out of them by stones, and then they short out and cause problems. I would take a look at it.

Posted on May 06, 2009

kidspeedy
  • 321 Answers

SOURCE: left rear turn signal light on my 1999 chev. s10 is not working

any increase in bink speed is direcly related to a bulb being burt out.

Posted on Jun 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 Nissan Sentra 1.8s and my left turn signal and my hazards will not work when running lights are on but the right signal works fine, also the left turn signal indicator in the dash is on


You have a bad ground on the left side. Use a jumper wire on the ground wire near the socket on the left side. If the lights start to work normally than trace the ground wire back to its body connection and repair

Nov 29, 2013 | 2005 Nissan Sentra

2 Answers

Turn signal and brake light not working.


Change the bulb.The bulb has two lights.Running,and brake light turn signal.Its the bulb

Apr 14, 2013 | 2004 Chevrolet Silverado 1500

1 Answer

Jaguar xj6 break light cancels signal


Replace the turn signal switch. Bad contact inside causing a crossing of the circuits. When the turn signal is applied it should open the brake light circuit allowing for just the signal to work. Doesn't sound like the switch is doing it's job.

May 23, 2010 | 1989 Jaguar Vanden Plas

1 Answer

Left turn signal doesn't work some times.


signal switch replacement is a common issue, i've replaced 5 so far.

Sep 22, 2009 | 1996 Chevrolet Blazer

3 Answers

1997 dodge avenger turn signal probs and location


replace the turn signal switch it self, mine did the same thing with the left turn signal, put in fuse and it will continue to flash... went to junk yard pulled one out of a 97 avenger just like mine, swapped them out and now it works fine. looked to be like some corrosion... to repace: 3 screws under columb, 2 screws on side of signal switch (black plastic side). unplug and replace

Mar 20, 2009 | 1997 Dodge Avenger

3 Answers

Turn signals


replaced turn signal flashers and muti switch turn signal still won't work Why?

Nov 08, 2008 | 2000 Jeep Grand Cherokee

1 Answer

Turn Signal problem


2003 mini cooper . Went for a clean up,and came back with the righ turn signal on all the time. every thing else works fine when you turn left or 4 way flashers. Any help will be appriciated. Thanks in advance

Jul 30, 2008 | 2002 Mini Cooper

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...