Question about 2001 Honda Odyssey

1 Answer

Obd code P2739

TCS and ABS LIGHTS CAME OUT ON MY PANEL AT THE SAME TIME

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

TCS and ABS lights being on is an indication of a transmission problem. Try replacing the transmission fluid first and if the problem is not resolved you may have to see a reliable transmission repair shop. Dealer will charge you a minimum of $4K to replace transmission assembly.

Posted on Dec 26, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: tcs, abs and brake indicator lights on dash come

If this is when you just put the key in, then its supposed to.

It's a problem if they don't go away after starting..

Check your owners manual, see if it says anything

Posted on Oct 31, 2009

  • 98 Answers

SOURCE: 2138

the system in a Honda is very complacated for the ABS it reads each tires speed for it to be able to pressurize the caliper according to the tires speed individualy controled if you say you had a loss of power you might want to get a pro to check the system and make sure everything is working correctly Hondas are like the Porsche for us Middle class people do not attempt work on this your self you can mess up the calibration of the ABS and get stuck with no brakes

Posted on Apr 03, 2010

danielwil208
  • 1 Answer

SOURCE: tcs,abs,brake lights

Just check these fuses and your battery/connections:

Under-Hood Fuse/Relay Box - #47 (20A), #48 (20A) and #50 (30A)
Driver's Under-Dash Fuse/Relay Box - #4 (7.5A)
Passenger's Under-Dash Fuse/Relay Box - #3 (10A) and #14 (7.5A)

Posted on Dec 21, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The brake light is on along with tcs and abs 2003 hyundai elantra


tcsd and abs work of sensors on all wheels so check for wiring and connections
brake light ( on dash) can be low fluid level in the brake reservoir, hand brake still on
run the fault codes to find exact codes that are putting the lights on

Oct 10, 2016 | Hyundai Motor 2003 Elantra

1 Answer

ABS/TCS lights on 2002 Honda Accord Coupe EX V6. Have high quality OBDII Scanner. Should the on board system report the problem to the scanner?


Only if the warning light showed on the dash...most often these abs sensors get clogged with brake dust or dislodged during wheel swaps if the pads are fine and fluid level correct...first check the brake pads then the disks and clean the sensors with an old toothbrush and reseat, also check the fluid level on the abs system.this should clear warning light.but any error codes stored on ecu need to be cleared using obd.

Nov 10, 2015 | 2002 Honda Accord

1 Answer

Light abs traction control stays 1998 buick park avenue


PRE-DIAGNOSTIC INSPECTIONBefore diagnosing ABS/TCS, perform a comprehensive visual inspection of system as follows.Check ABS/TCS wiring harness connectors for looseness. Check harness routing; pay particular attention to wheel speed sensor wiring harness routing. Check fuses No. 1D, 5B and 6B in instrument panel fuse block. Check fuses No. 1 and 2 in underhood fuse block. Check brake fluid level in master cylinder reservoir. Check brake fluid level in Pressure Modulator Valve (PMV) assembly reservoir. Ensure parking brake is fully released. Ensure parking brake switch is functioning properly. Always perform ABS/TCS system functional check before using DIAGNOSTIC CODE CHARTSThe EBCM/EBTCM has self-diagnostic capability, which can detect system failures. Fault codes stored by EBCM/EBTCM can be displayed using Tech 1 scan tester. There are no provisions for flash code diagnostics.Begin ABS/TCS diagnosis with PRE-DIAGNOSTIC INSPECTION procedure. If failures are found during pre-diagnostic inspection, perform necessary repairs, and proceed with ABS/TCS FUNCTIONAL CHECK. See Fig. 5 .If no failures are found during pre-diagnostic inspection, go to ABS/TCS FUNCTIONAL CHECK. See Fig. 5 . The ABS/TCS FUNCTIONAL CHECK will either indicate ABS/TCS is functioning properly or direct technician to various diagnostic procedures such as diagnostic charts, symptom diagnosis or BRAKE warning light diagnosis.CHART D - TRACTION OFF WARNING LIGHT ON CONTINUOUSLY & NO DTC SET (BUICK WITH UH8 OR U2A INSTRUMENT CLUSTER)Circuit DescriptionWhen ignition switch is first turned to RUN position, EBTCM goes through a self-test, which lasts 2-4 seconds. During self-test, EBTCM commands TRACTION OFF indicator warning light on. Powertrain Control Module (PCM) can also command EBTCM to set a Code 75 which will illuminate TRACTION OFF indicator.Traction control switch is located either on instrument panel center trim plate or driver's front door trim panel. Switch allows driver to select traction control mode (on/off). When traction control system is turned off, TRACTION OFF warning light comes on.EBTCM monitors transaxle temperature through

Jul 12, 2014 | 1998 Buick Park Avenue

1 Answer

Diagnosis ABS & TCS dashboard lights on


You will need access to a scan tool that "talks" to the ABS module. As for the fix, it depends on what the diagnosis tells you.

Jan 29, 2014 | 1997 Mazda 626

1 Answer

Tcs and abs light is on but there are no codes coming up when I plug in my scanner that tests the abs and air bag and obd 2


check make sure alternator charging battery.with engine idling check alternator output volts should be 13.5 - 14.5 volts.if volts 11 not enough power to work abs brake system.

Sep 26, 2013 | 2001 Hyundai XG300

2 Answers

Code 2200 - ABS Module Malfunction


The cpu moniters all the systems you mentioned so any one of the sensors can be faulty and put the light on. In my reference book on codes OBD-11 P2 the code quoted refers to nitrogen oxide sensor bank 1 circuit malfunction causes wiring NOx sensor or heated oxygen sensor 3 bank1. Wiring short to positive---short to ground ---ECM unless the ECM controls the abs etc I would be seeking a second opinion as to the problem
My reference is Auto data diagnostic trouble codes Engine management systems--2012

Apr 25, 2013 | 2008 Chrysler Town & Country

1 Answer

The abs and tcs lights came on at same time


You'll need to get the system scanned for trouble codes.
Some code readers will not access the ABS or body computer.
A trouble code for the ABS can also knock out the traction control.

Feb 21, 2013 | 1999 Chevrolet Venture

1 Answer

Abs & TCS-off dash lights both stay on. Pushing the TCS off switch does not help. "seem" to stop fine. Emergency brake seems to be fully off, not dragging. My wife encountered a patch of ice...


Hello: If there is a problem in the ABS it will bring on the tcs light as well. To determine what is causing the problem you need to have the ABS checked with a scanner to get the code. Then trouble shoot the components that the code leads you to. Normal braking is available with the light on but TCS is not as it relies on ABS for functioning the TCS.

Mar 04, 2011 | 2008 Saturn VUE

1 Answer

How do you reset the ABS and TCS lights on a 2002 Mazda 626?


these reset each time the key is turned on to start the car, if they remain on there is a problem in the system, the ABS and TCS are run by the same system control module, have it tested to see what fault code shows up to indicate what part has failed.

Aug 23, 2010 | 2002 Mazda 626

Not finding what you are looking for?
2001 Honda Odyssey Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...