Question about 1998 Ford Expedition

1 Answer

Replace vent glass

Someone broke out the rear passenger vent glass in my truck. I have purchased the new glass assembly put cannot figure out to get it in. HELP!!!! Too cold for my kids to be riding around with this glass out!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 94 Answers

It is easiest if you remove the door panel and passenger glass first. Once that is done it is much easier to remove the weather stripping, seal and vent window.

Posted on Dec 26, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 87 Answers

SOURCE: rear mirror replacement

is it power or manual if power bad laft right motor if manual pull the entire housing

Posted on Jun 12, 2008

  • 1 Answer

SOURCE: How do I install a new F-350 passenger side (only) glass mirror

Since it was just the glass that was broken, I had to remove the extra parts that came with the new mirror I purchased from Ford service department. Once I made the change it all made sense!

Posted on Dec 23, 2008

  • 1 Answer

SOURCE: 2003 Ford Explorer. A/c blows cold, but not from front of vents

I have the 03 Expy with continuous rear air unit "clicking" or more accurately flapping of the air damper while the plastic gears in the 2L2H-19E616-AA grind away into toothlessness. Ford designed this unit to find the end of travel by jamming the motor to a stop and monitoring the current to determine when to stop applying voltage. That would probably be fine if the gears were designed to handle the jammed torque or the motor did not slip out of groove and continue turning and cracking the plastic gears.

There are two white colored boxes, one is for the temp plenum door, the other the upper/lower air flow. To be sure, do what I did, turn on the ignition, rear ac/heat and listen for the obnoxious click/thump as you move the temp control from full heat to full cool, you will know which part. Disconnect the electrical connector, four bolts and it is out!

Go to your dealer, part should be about $60 or less, look on line, lots of dealers sell for this or less on internet.

Posted on Apr 07, 2009

carlsbiz
  • 1124 Answers

SOURCE: Someone attempted to steal the passenger side

Yes - there should be a cosmetic cover on the inside where the mirror connects.. Pop the cosmetic cover off and you will see how to detatch it from the car.

Posted on Sep 21, 2009

  • 35 Answers

SOURCE: Passenger window glass broke when I tried rolling

Brakes are a mere coincidence. Nothing about brakes ties to window elec. The window may have come off track, the glass area is quite large.

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I own a 1997 Plymouth Grand Voyager 3.3liter and I need to know if I have to replace the quarter glass because I accidentally broke the vent control that attaches to the quarter glass


The most economical fix would be a salvage yard replacement. The glass is glued to the frame with urethane and is quite tough to separate. I would think you can purchase the whole assembly at a salvage yard for what you would pay for just the frame new.

Mar 02, 2017 | 1997 Plymouth Grand Voyager

1 Answer

I got a 2004 range rover someone broke in it breaking the driver side passenger rear door vent window how do I fix it myself


Try eBay they sell things of this nature, or take out the broken
vent window, go to a glass guy and have them cut you a piece. But I think eBay would be the cheapest way to go. Good luck hope this helped.

Feb 18, 2015 | Rover Cars & Trucks

1 Answer

How do I replace the rear passenger side window on a 1995 GMC SLE club cab pick up truck ?


Auto Glass Companies come to your
home or business

Don't need to know about the kids
Why are they always part of vehicle problems

Oct 27, 2014 | 1995 GMC Sierra C1500

1 Answer

Have 2001 Windstar I broke the rear passenger window can get one from u pull scrap yard but not sure how to get it off and put it on again


get the glass from the wreckers and take it to a windscreen replacement shop as it may need a special adhesive to put it back in.

Apr 07, 2014 | Cars & Trucks

1 Answer

Vent glass


Auto Glass Shop
Phone Book
They come to your work or home

Jul 23, 2013 | Buick Cars & Trucks

1 Answer

What is the battery vent hose on the 2000 buick LeSabre for and can the battery be changed without putting the vent hose back on? I put a new battery in and accidentally broke the one side of the hose...


Since the battery is located inside the passenger compartment (under the rear seat), the vent hose is needed to vent the sulfuric acid fumes to the outside of the car - away from the passengers.

Feb 08, 2011 | 2000 Buick LeSabre

1 Answer

Replacing a rear vent window on a 98 Cavalier


do you mean the quarter light glass ,if so then have to remove the big glass first ,then the rear window runner /channel

Jan 08, 2010 | 1998 Chevrolet Cavalier

1 Answer

How get replacement rear vent window into place? its a 1995 maxima passenger side rear vent window.have picked up a new one from salvage and fear if i force it, it may shatter.


The metal glass run between the vent & doorglass has a phillips screw at the top under the door weatherstrip. I usually remove that screw, with the doorglass down & glass run (felt) pulled down at the top just enough to allow the metal part to move as you force the ventglass into place. lube the vent gasket with silicone spray or any good wet lubricant and force the glass in, bottom 1st. If this makes you too anxious, remove the 10 mm attachment that retains the metal glass run at the lower end of the part. To get to it, you will have to remove the door panel. Good luck

Sep 27, 2009 | Nissan Maxima Cars & Trucks

2 Answers

I broke my passanger side mirror. I bought new


REPLACEMENT GLASS IS AVAILABLE AT YOUR DEALER SHIP AS THIS CLASS IS A CURB GLASS AND NOT A FLAT GLASS AND FITS PERFECTLY.

Jul 15, 2009 | 2008 Hyundai Elantra

2 Answers

Rear passenger electric window stuck in down position


That happened to mine, too. The cable that raises and lowers the window broke. I needed a new window motor assembly. If I recall, I got one used for less than $30, and I know I was able to replace it myself, curbside without special tools. You just need to make sure the window glass is taped up and unable to crash once you remove the old motor. The hardest part for me was figuring out how to remove the interior door assembly!

Aug 10, 2008 | 2005 Chevrolet Malibu

Not finding what you are looking for?
1998 Ford Expedition Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...