Question about 2006 Hyundai Sonata

1 Answer

SONATA V6 2000 DOES NOT START NO FIRE CODE PO335

The car does'nt start no fire at the spark plugs
the code po 335
defective crankshaft sensor
i'm hesitating to change this expensive part

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 5,568 Answers

The crankshaft sensor determines when to fire the plugs; if it has failed, no plugs will fire.
If you have no mechanic friends who know how to test this sensor, you should probably invest in an aftermarket service manual. They have simple tests for most sensors and conditions that don't require costly equipment or detailed knowledge.
I prefer Haynes and they are available on line here:
Haynes Sonata Manual
You may also find them elsewhere for a few dollars less.

Posted on May 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

01 dodge dakota 3.9. no power to coil replaced engine control relay still no power can jump across relay get power but no start and get code for no rpm


If you're getting a code for no RPM, the PCM is not receiving a signal from the crankshaft position sensor. The PCM uses the signal from the crankshaft position sensor to fire the coil/spark plugs. Check the wiring to the crankshaft position sensor and check the sensor itself.

Oct 29, 2016 | 2001 Dodge Dakota

1 Answer

Not firing, changed fuel filter and crankshaft position sensor


Is the code still active, and are the injectors opening ?
Will it start using starting fluid ?

Feb 03, 2014 | 2004 Chevrolet Blazer

1 Answer

Codes po 123 po335 po446


Code 123 is a problem with the throttle position sensor circuit.
Code 335 is a problem with the crank position sensor circuit.
And code 446 is for a EVAP control valve problem.
These components would need to be tested to find out if they are faulty.

Dec 13, 2012 | Hyundai Motor 1998 Accent

4 Answers

Car dies while driving


Your fuel pump needs cleaning, I had same problem

Feb 24, 2012 | 2002 Cadillac Seville

1 Answer

I have a 2005 hyundai sonata 2.7L. The car is loosing power at about 35mph, the car gave me a po335 code crankshaft sensor. Were can I find it exacly, the book does not give me the correct location. I...


PO335 crank shaft postion circuit "A" circuit malfunction This sensor is mounted on the left side of the engine block,Near the flywheel. If you replace this because its a code let me know if it worked and if you are getting more than 35 mph.

Apr 25, 2011 | 2000 Hyundai Sonata

1 Answer

Endeveor 07 3.8l!crank but no start???????po335 ckp code is on!no fire,no injector signal!i have my reference on my ckp and my cmp and my 12 volt,my groud and the 5volt!but iam not sure i install the...


code p0335 crankshaft position sensor"A" circuit malfunction. but if all electrical an grounding check out then it is likely your (IAT)intake air temperature sensor which is faulty.....

Mar 18, 2011 | 2007 Mitsubishi Endeavor

1 Answer

MY CAR WAS PUT ON A MACHINE AND IT CAME BAC THE FOLLOWING CODES: PO 301, PO304, PO335, AND PO 750. I DONT KNOW WHAT TO DO MY MECHANIC SAYS THAT THE SHIFT SOLENOID IS LOCATED IN MY TRANSMISSION AND HE...


hi p -codes are as follows po 301 cylinder 1 missfire detected
po 304 cylinder 4 missfire detected
po 335 crankshaft position sensor A circuit malfunctio
po 750 shift solenoid A malfunction

Feb 23, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

Po335


P0335 = Crankshaft Position Sensor A Circuit Malfunction
This is a sensor used to let the computer know where in the rotation the crankshaft is so it knows when to fire the sparkplugs (among other things). The sensor may be bad or just the connection.

Feb 11, 2011 | 2000 Hyundai Sonata

2 Answers

Code po304 #4 cylinder mis fire


ck if you have spark at the coil for that cylinder. check the plug wire closely. if it has spark at the coil, then replace all the spark plug wires.

Oct 12, 2009 | 2000 Cadillac DeVille

1 Answer

Sonarta will not start


the crank sensor is either defective,or the plug is dirty on the connector.

May 01, 2009 | 2000 Hyundai Sonata

Not finding what you are looking for?
2006 Hyundai Sonata Logo

376 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...