1991 acura integra does not start
I was driving mine down the road the other day and it just cut off and wouldn't start back up. Had it towed home and checked fuses, rotor button, distributor cap, and plug wires, but did not find anything wrong. It turns over fine, but just won't fire up. The battery is fully charged and all the lights and interior options work fine.<!-- from fixya rte -->
Comments:
May 18, 2009
- Sorry, it's a 2001 Integra...
May 18, 2009
- Thx. Will check that after work today and report back.
May 18, 2009
- The distributor still turns. Isn't that controlled indirectly by the timing belt?
May 20, 2009
- I fixed it. It wasn't the timing belt. It was the ignition coil. Thanks anyway.
2001, 1.8L VTECH , DOHV in a Acura Integra. What is the type of head bolts are retaining the head to...
(More)
2001, 1.8L VTECH , DOHV in a Acura Integra. What is the type of head bolts are retaining the head to the block.
In removing the head there are two large allen head bolts and eight other head bolts.It looks like a...
(More)
In removing the head there are two large allen head bolts and eight other head bolts.It looks like a small allen head bolt with a totx nut lower down the bolt, is this true and what is the method to remove the eight bolts?
01' integra gsr.. stalled it today on a normal first gear take of... it stalled again immediately on...
(More)
01' integra gsr.. stalled it today on a normal first gear take of... it stalled again immediately on an even more soft first gear start.. now everytime i get on the gas for a normal start it cuts out in first. i shift to second it does it a little. and i was cruizing in 3rd, let off the gas and got on it and it keeps cutting out for a second.. i didnt try fourth or fifth